Nonlinear Behavior of Heavy Class Steel Truss Bridges
Publication: Journal of Structural Engineering
Volume 129, Issue 8
Abstract
This paper presents nonlinear modeling and analysis of a decommissioned steel truss bridge (STB) in Franklin County, Ohio that was tested to failure in 1992 and demolished in 1993. When the existing heavy class STB constructed with built-up sections and rigid joints are idealized in the analysis as simple nonredundant trusses, the load rating of the trusses may indicate posting or replacement. The inherent capabilities and the redundancy of heavy class trusses may be studied by nonlinear analysis. In this paper, nonlinear models of the subject bridge are evaluated by sensitivity analysis, the most viable representation of the bridge is selected, and the simulated behavior is correlated with those measured during the destructive testing of the bridge. Analyses suggested that trusses of this bridge possess significant rotational energy that must be dissipated by plastic deformations within the truss joints before the rigid frame-like truss is transformed into a determinate system. Analysis and tests indicated that heavy-class STBs remain redundant and maintain their load capacity even after initiation of material yielding in several members of the main trusses. The paper also discusses the minimum requirements of nonlinear finite element analysis for the strength and failure mode evaluation of existing steel bridges.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1989). “Guide specification for strength evaluation of the existing steel and concrete bridges.” American Association of State Highway and Transportation Officials, Washington, D.C.
ABAQUS. (2001). Hibbitt, Karlson & Sorenson, Inc, Pawtucket, R.I.
Aktan, A. E., Lee, K. L., Nagavi, R., Aksel, T., and Hebbar, K. (1994a). “Destructive testing of two 80-year-old truss bridges.” Record No. 1460, Transportation Research Board, Washington, D.C.
Aktan, A. E., Nagavi, R., Farhey, D., Lee, K. L., Aksel, T., and Hebbar, K. (1994b). “Nondestructive/destructive tests and associated studies on two decommissioned steel truss bridges.” Rep. FHWA/OH-95/013, Univ. of Cincinnati, Infrastructure Institute, Cincinnati.
Chen, P., and Powell, G. (1982). “Generalized plastic hinge concepts for 3D beam-column elements.” Rep. No. UCB/EERC-82/20, November, Univ. of California at Berkeley, Calif.
Delony, E. (1994). The golden age of iron bridges, American Heritage of Invention and Technology, Fall, 10(2).
DIANA. (2001). DIANA Analysis BV, Delft, The Netherlands.
Farhey, D., Thakur, A., Buchanan, R., Aktan, A. E., and Jayaraman, N.(1997). “Structural deterioration assessment for steel bridges.” J. Bridge Eng., 2(3), 116–124.
Farhey, D. N., Nagavi, R., Levi, A., Thakur, A. M., Pickett, M. A., Nims, D. K., and Aktan, A. E.(2000). “Deterioration assessment and rehabilitation design of existing steel bridge.” J. Bridge Eng., 5(1), 39–48.
Frangopol, D. M. (1987). “The effects of damage and redundancy on structural performance.” Proc., Structural Division of the American Society of Civil Engineers, ASCE. April.
Frangopol, D. M., and Nakib, R. (1989). Redundancy in highway bridges, American Institute of Steel Construction, AISC, 3rd quarter, 26(3).
Huria, V., Lee, K.-L., and Aktan, A. E.(1993). “Nonlinear finite element analysis of RC slab bridge” J. Struct. Eng., 119(1), 88–107.
Klaiber, F. W., Sanders, W. W., and Ellbey, H. A. (1976). “Ultimate load test of a high-truss bridge.” NCHRP Rep. No. 607. Engineering Research Institute, Iowa State Univ., Ames, Iowa.
Lee, K.-L., Chuntavan, C., Huria, V., and Aktan, A. E. (1991). “Computer program for three dimensional static collapse analysis of structures—(3DSCAS), Version II.” Rep. No-01/91, Dept. of Civil and Environmental Engineering, Univ. of Cincinnati, Cincinnati.
LS-DYNA. (2001). Livermore Software Technology Co., Livermore, Calif.
Mondkar, D., and Powell, G. (1975). “ANSRI, General purpose program for analysis of nonlinear structural response.” EERC, Rep. No. 75-37, Univ. of California at Berkeley, Calif.
Nagavi, R. S. (1997). “Strength evaluation of the existing steel truss bridges based on destructive tests.” Doctoral dissertation, Dept. of Civil and Environmental Engineering, Univ. of Cincinnati, Cincinnati.
Rolfe, S., and Barsom, J. (1987). Fracture and fatigue control in structures, Prentice-Hall, Englewood Cliffs, N.J.
SAP2000. (1997). Computers and Structures, Inc., Berkeley, Calif.
Shahrooz, B. M., Ho, I. K., Aktan, A. E., Borst, R., Blaauwendraad, J., Veen, C., Iding, R. H., and Miller, R. A.(1994). “Nonlinear finite element analysis of deteriorated RC slab bridge.” J. Struct. Eng., 120(2), 422–440.
Simons, J., and Powell, G. (1982). “Solution strategies for statically loaded nonlinear structures.” Rep. No. UCB/EERC-82/22, November, Univ. of California at Berkeley, Calif.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 129 • Issue 8 • August 2003
Pages: 1113 - 1121
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Apr 5, 2000
Accepted: Sep 25, 2002
Published online: Jul 15, 2003
Published in print: Aug 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.