Field Assessment of Unreinforced Masonry Walls Strengthened with Fiber Reinforced Polymer Laminates
Publication: Journal of Structural Engineering
Volume 129, Issue 8
Abstract
Unreinforced masonry (URM) walls strengthened with composites were tested to failure at a decommissioned building in St. Louis, Missouri. The walls were subjected to out-of-plane loading. Previous work on URM as well as reinforced masonry walls strengthened with fiber reinforced polymer (FRP) laminates has shown remarkable increases in capacity and ductility. However, most of this research work has been conducted in the laboratory, where, it is difficult to reproduce real field conditions. In this context, this experimental program offered a unique opportunity for performing field experimentation on URM walls strengthened FRP laminates showing that shear compression led to controlling the failure of either the upper or lower boundary masonry units. An analytical model that provides good agreement with the experimental results is also presented. The model computes the applied concentrated out-of-plane load, midheight deflection, and rotations at the supports. The analytical model can be easily modified to take into account distributed loads acting on the wall.
Get full access to this article
View all available purchase options and get full access to this article.
References
Angel, R., Abrams, D. P., Shapiro, D., Uzarski, J., and Webster, M. (1994). “Behavior of reinforced concrete frames with masonry infills.” Structural Research Series 589, Dept. of Civil Engineering, Univ. of Illinois at Urbana-Champaign, Ill.
Bennett, R. M., Boyd, K. A., and Flanagan, R. D.(1997). “Compressive properties of structural clay tile prisms.” J. Struct. Eng., 123(7), 920–926.
Ehsani, M. R., Saadatmanesh, H., and Velazquez-Dimas, J. I.(1999). “Behavior of retrofitted URM walls under simulated earthquake loading.” J. Compos. Constr., 3(3), 134–142.
Galati, N., Tumialan, J. G., La Tegola, A., and Nanni, A. (2002). “Influence of arching mechanism in masonry walls strengthened with FRP laminates.” Int. Conf. in Composites for Infrastructures, ICCI 2002 (CD-ROM), San Francisco, June 10–12, 10.
Fricke, K. E., Jones, W. D., and Huff, T. E. (1992). “In situ lateral load testing of unreinforced masonry hollow clay tile wall.” 6th Canadian Masonry Symp., Saskatchewan, Canada, 519–530.
Hamilton III, H. R., Holberg, A., Caspersen, J., and Dolan, C. W. (1999).“Strengthening concrete masonry with fiber reinforced polymers.”4th Int. Symp. on Fiber Reinforced Polymer (FRP) for Reinforced Concrete Structures, ACI SP-188, Baltimore, 1103–1115.
Masonry Standards Joint Committee (MSJC). (2002). Building code requirements for masonry structures, ACI-530-02/ASCE 5-02/TMS 402-02, Detroit.
Velazquez-Dimas, J. I., Ehsani, M. R., and Saadatmanesh, H.(2000). “Out-of-plane behavior of brick masonry walls strengthened with fiber composites.” ACI Struct. J., 97(5), 377–387.
Tumialan, J. G. (2001). “Strengthening of masonry structures with FRP composites.” Doctoral dissertation, Univ. of Missouri-Rolla, Rolla, Mo.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Dec 4, 2001
Accepted: Sep 27, 2002
Published online: Jul 15, 2003
Published in print: Aug 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.