Applications of Some Semiactive Control Systems to Benchmark Cable-Stayed Bridge
Publication: Journal of Structural Engineering
Volume 129, Issue 7
Abstract
Recently, a benchmark cable-stayed bridge model was developed for the control community as a test bed to evaluate the performance of various strategies for the control of cable-stayed bridges during earthquakes. In this paper, the effectiveness and performances of some semiactive and passive control systems for this benchmark cable-stayed bridge are evaluated and presented. The semiactive control systems considered include the semiactive stiffness damper and the semiactive friction damper. Cases of passive linear and nonlinear viscous fluid dampers are also investigated and presented. The performances of semiactive control systems are evaluated using effective control strategies and compared with that of the sample active control system using actuators. Simulation results clearly indicate that the displacement of the bridge deck as well as the shear and moment at the base of the towers can be reduced substantially by installing these passive and semiactive protective devices. It is shown that semiactive and passive devices investigated herein are effective in reducing the peak response quantities of the bridge to a level comparable to that of the sample active controller under similar force constraints.
Get full access to this article
View all available purchase options and get full access to this article.
References
Agrawal, A. K., and He, W. L. (2000). “Semi-active control of seismically excited benchmark building using a resetting semi-active stiffness damper.” Proc., 2nd European Conf. on Structural Control, European Association for the Control of Structures, Champs-sur-Marne, France, July 3–6, 2000.
Agrawal, A. K., and Yang, J. N.(1999a). “Design of passive energy dissipation systems based on LQR methods.” J. Intell. Mater. Syst. Struct., 10(12), 933–944.
Agrawal, A. K., and Yang, J. N.(1996b). “Optimal placement of passive dampers on buildings using combinatorial optimization.” J. Intell. Mater. Syst. Struct., 10(12), 997–1014.
Agrawal, A. K., and Yang, J. N. (2000a). “Semi-active control strategies for buildings subject to near-field earthquakes.” Proc. SPIE, Smart Structures and Materials 2000: Smart Systems for Bridges, Structures, and Highways, March 6–8, Newport Beach, Calif., 3988, 359–370.
Agrawal, A. K., and Yang, J. N. (2000b). “A semi-active hybrid isolation system for buildings subject to near-field earthquakes.” Advanced Technology in Structural Engineering (CD-ROM), 8 pages, ASCE, Proc. ASCE 2000 Structures Congress and Exposition, May 8–10, Philadelphia.
Bobrow, J. E., Jabbari, F., and Thai, K.(2000). “A new approach to shock isolation and vibration suppression using a resettable actuator.” J. Dyn. Syst., Meas., Control, 122, 570–573.
Chen, C. C., and Chen, G. D. (2001). “A high efficiency control logic for semi-active friction dampers.” Proc., 2001 Structures Congress, May 21–23, Washington, D.C., (CD-ROM), 11 pages.
Dyke, S. J., Bergman, L. A., Turan, G., and Caicedo, J. M. (2000). “Benchmark control problem for seismic response of cable-stayed bridges.” Proc., 3rd Int. Workshop on Structure Control, Paris, July 7–10.
Dyke, S. J., Bergma., L. A., Turan, G.and Caicedo, J. M.(2003), “Benchmark control problem for seismic response control of cable-stayed bridges.” J. Struct. Eng., 129(7), 857–872.
Fujita, T., et al. (1994). “Semiactive seismic isolation using controllable friction damper.” Bull. Earthquake Res. Inst., Univ. Tokyo, 27(2), 21–31.
Gluck, N., Reinhorn, A. M., Gluck, J., and Levy, R.(1996). “Design of supplemental dampers for control of structures.” J. Struct. Eng., 122(12), 1394–1399.
He, W.-L., Agrawal, A. K., and Mahmoud, K.(2001). “Control of seismically excited cable-stayed bridge using resetting semi-active stiffness dampers.” J. Bridge Eng., 6(6), 376–384.
He, W.-L., Agrawal, A. K., and Yang, J. N.(2003). “A novel semi-active friction controller for linear structures against earthquakes.” J. Struct. Eng., 129(7), 941–950.
Housner, G. W., Bergman, L. A., Caughey, T. K., Chassiakos, A. G., et al. (1997). “Structural control: Past, present, and future.” J. Eng. Mech., 123(9), 897–971.
Inaudi, J. A.(1997). “Modulated homogeneous friction: A semi-active damping strategy.” Earthquake Eng. Struct. Dyn., 26, 361–376.
Jabbari, F., and Bobrow, J. E.(2002). “Vibration suppression with resettable device.” J. Eng. Mech., 128(9), 916–924.
Kobori, T., and Kamagata, S. (1992). “Active variable stiffness system—Active seismic response control.” Proc., U.S.-Italy-Japan Workshop/Symposium on Structural Control and Intelligent Systems, July 13-15, Sorrento, Italy, July 17, Genoa, Italy, 140–153.
Kamagata, S., and Kobori, T. (1994). “Autonomous adaptive control of active variable stiffness systems for seismic ground motion.” Proc., 1st World Conf. on Structural Control, 2, TA4-23, Pasadena, Calif., USC Publication, Los Angeles.
Nasu, T., Kobori, T., Takahashi, M., Niwa, N., and Ogasawara, K.(2001). “Active variable stiffness system with non-resonant control.” Earthquake Eng. Struct. Dyn., 30(11), 1597–1614.
Spencer, B. F., Jr., and Sain, M. K.(1997). “Controlling buildings: A new frontier in feedback.” IEEE Control Syst. Mag., 17(6), 19–35.
Yang, J. N., and Agrawal, A. K. (2000). “Protective system technology for building structures against near-field earthquakes.” Proc., Int. Workshop on Annual Commemoration of Chi-chi Earthquake, Vol. II—Technology Aspect, National Center for Research on Earthquake Engineering, Taipei, Taiwan, 76–87.
Yang, J. N., and Agrawal, A. K.(2002). “Semi-active hybrid control systems for nonlinear buildings against near-field earthquakes.” Eng. Struct., 24, 271–280.
Yang, J. N., Agrawal, A. K., and He, W. (2000a). “Response control of nonlinear structures using a semi-active stiffness damper.” Advances in Structural Dynamics, Vol. I, 349–356, Elsevier Science Ltd., Proc., Int. Conf. on Advances in Structural Dynamics, Dec. 13–25, Hong Kong.
Yang, J. N., Agrawal, A. K., and Kim, J. H. (1999a). “A semi-active stiffness damper for vibration control of civil engineering structures.” Proc., 17th Int. Modal Analysis Conf. (IMAC XVII), Society for Experimental Mechanics, Kissimmee, Fla., Feb. 8–11, 437–443.
Yang, J. N., Kim, J. H., and Agrawal, A. K. (1999b). “Seismic response control using semi-active stiffness dampers.” Proc., Int. Workshop on Seismic Isolation, Energy Dissipation and Control of Structures, Seismological Press, Guangzhou, China, 312–319.
Yang, J. N., Kim, J.-H., and Agrawal, A. K.(2000b). “A resetting semi-active stiffness damper for seismic response control.” J. Struct. Eng., 126(12), 1427–1433.
Yang, J. N., Lin, S., Kim, J. H., and Agrawal, A. K.(2002). “Optimal design of passive energy dissipation systems based on and performances.” Earthquake Eng. Struct. Dyn., 31(4), 921–936.
Yang, J. N., Wu, J. C., and Li, Z.(1996). “Control of seismic-excited buildings using active variable stiffness systems.” J. Eng. Struct., 18(8), 589–596.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Nov 6, 2001
Accepted: Jan 27, 2003
Published online: Jun 13, 2003
Published in print: Jul 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.