Form Finding of Sparse Structures with Continuum Topology Optimization
Publication: Journal of Structural Engineering
Volume 129, Issue 12
Abstract
A continuum topology optimization methodology suitable for finding optimal forms of large-scale sparse structures is presented. Since the need to avoid long compressive spans can be critical in determining the optimal form of such structures, a formulation is used wherein the structure is modeled as a linear elastic continuum subjected to design loads, and optimized in form to maximize the minimum critical buckling load. Numerical issues pertinent to accurate solution of the linearized buckling eigenvalue problem and accurate design sensitivity analysis are discussed. The performance of the proposed design formulation is demonstrated on a few problems designed to find optimal forms of a canyon bridge, long-span bridges, and an electrical transmission tower. In all cases, very credible structural forms are obtained with the proposed design formulation. The results of the design examples solved are typically superior structural forms with regard to buckling stability than those obtained to minimize the mean structural compliance.
Get full access to this article
View all available purchase options and get full access to this article.
References
Achtziger, W.(1999). “Local stability of trusses in the context of topology optimization Part II: A numerical approach.” Struct. Optim., 17, 247–258.
Bathe, K. J. (1996). Finite element procedures, Prentice-Hall, Englewood Cliffs, N.J.
Bendsøe, M. P., and Kikuchi, N.(1988). “Generating optimal topology in structural design using a homogenization method.” Comput. Methods Appl. Mech. Eng., 71, 197–224.
Bendsøe, M. P., and Sigmund, O.(1999). “Material interpolations in topology optimization.” Arch. Appl. Mech., 69, 635–654.
Bojczuk, D., and Mróz, Z.(1999). “Optimal topology and configuration design of trusses with stress and buckling constraints.” Struct. Optim., 17, 25–35.
Bruns, T. E., and Tortorelli, D. A.(2001). “Topology optimization of nonlinear elastic structures and compliant mechanisms.” Comput. Methods Appl. Mech. Eng., 190, 3443–3459.
Buhl, T., Pedersen, W., and Sigmund, O.(2000). “Stiffness design of geometrically nonlinear structures using topology optimization.” Struct. Multidisc. Optim.,19, 93–104.
Cheng, K. T., and Olhoff, N.(1981). “An investigation concerning optimal design of solid elastic plates.” Int. J. Solids Struct., 17, 305–323.
Choi, K. K., Haug, E. J., and Seong, H. G.(1983). “An iterative method for finite dimensional structural optimization problems with repeated eigenvalues.” Int. J. Numer. Methods Eng., 19, 93–112.
Dobbs, W., and Felton, L. P.(1969). “Optimization of truss geometry.” Proc. ASCE,95(ST10), 2105–2519.
Dorn, W., Gomory, R., and Greenberg, H.(1964). “Automatic design of optimal structures.” J. Mech., 3, 25–52.
Eschenauer, H. A., and Olhoff, N.(2001). “Topology optimization of continuum structures: A review.” Appl. Mech. Rev., 54, 331–390.
Gea, H. C., and Luo, J.(2001). “Topology optimization of structures with geometrical nonlinearities.” Comput. Struct., 79, 1977–1985.
Guedes, J. M., and Rodrigues, H. C.(1995). “Necessary conditions for the optimal design of structures with nonsmooth eigenvalue based criterion.” Struct. Optim., 9, 52–56.
Hemp, W. S. (1973). Optimum structures, Clarendon, Oxford, U.K.
Kocer, F. Y., and Arora, J. S.(2002). “Optimal design of latticed towers subjected to earthquake loading.” J. Struct. Eng., 128(2), 197–204.
Kočvara, M.(2002). “On the modeling and solving of the truss design problem with global stability constraints.” Struct. Multidisc. Optim.,23, 189–203.
Ma, Z. D., Kikuchi, N., and Cheng, H. C.(1995). “Topological design for vibrating structures.” Comput. Methods Appl. Mech. Eng., 121, 259–280.
Michell, A. G. M.(1904). “The limits of economy in frame structures.” Philos. Mag., 8(47), 589–597.
Mijar, A. R., Swan, C. C., Arora, J. S., and Kosaka, I.(1998). “Continuum topology optimization for concept design of frame bracing systems.” J. Struct. Eng., 124(5), 541–550.
Min, S., Nishiwaki, S., and Kikuchi, N.(2000). “Unified topology design of static and vibrating structures using multiobjective optimization.” Comput. Struct., 75, 93–116.
Neves, M. M., Rodrigues, H., and Guedes, J. M.(1995). “General topology design of structures with a buckling load criterion.” Struct. Optim., 10, 71–78.
Oberndorfer, J. M., Achtziger, W., and Hörnlein, H. R. E. M.(1996). “Two approaches for truss topology optimization: a comparison for practical use.” Struct. Optim., 11, 137–144.
Ohsaki, M., and Swan, C. C. (2002). “Topology and geometry optimization of trusses and frames.” ASCE/SEI State-of-Art-Rep. on Structural Optimization, S. A. Burns, ed., New York.
Rahmatalla, S. F., and Swan, C. C.(2003). “Continuum topology optimization of buckling-sensitive structures.” AIAA J.,41(6), 1180–1189.
Rozvany, G. I. N. (1976). Optimal design of flexural systems, Pergamon, Oxford, U.K.
Rozvany, G. I. N.(1996). “Difficulties in truss topology optimization with stress, local buckling and system stability constraints.” Struct. Optim., 11, 213–217.
Save, M., and Prager, W. (1990). Structural optimization, Plenum, New York.
Seyranian, A. P., Lund, E., and Olhoff, N.(1994). “Multiple eigenvalues in structural optimization problems.” Struct. Optim., 8, 207–227.
Swan, C. C., and Arora, J. S.(1997). “Topology design of material layoutin structured composites of high stiffness and strength.” Struct. Optim., 13(1), 45–59.
Swan, C. C., Arora, J. S., Kosaka, I., and Mijar, A. R. (1998). “Concept design of bridge structures for stiffness and vibrations using continuum topology optimization.” Structural engineering worldwide, N. K. Srivastava, ed., ASCE, New York.
Swan, C. C., and Kosaka, I.(1997). “Voigt–Reuss topology optimization for structures with nonlinear material behaviors.” Int. J. Numer. Methods Eng., 40, 3785–3814.
Yin, L., and Ananthasuresh, G. K.(2002). “A novel topology design scheme for multiphysics problems of electro-thermally actuated compliant micromechanisms.” Sens. Actuators A, 3226, 1–12.
Zou, M.(1996). “Difficulties in truss topology optimization with stress and local buckling constraints.” Struct. Optim., 11, 134–136.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 129 • Issue 12 • December 2003
Pages: 1707 - 1716
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jul 18, 2002
Accepted: Nov 19, 2002
Published online: Nov 14, 2003
Published in print: Dec 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.