Application of Dynamic System Identification to Timber Bridges
Publication: Journal of Structural Engineering
Volume 129, Issue 1
Abstract
A method of global nondestructive evaluation for identifying local damage and decay in timber beams was developed in previous analytical studies and verified experimentally using simply supported beams in the laboratory. The method employs experimental modal analysis and an algorithm that monitors changes in modal strain energy between the mode shapes of a damaged structure with respect to the undamaged structure. A simple three-girder bridge was built and tested in a laboratory to investigate the capability and limitations of the method for detecting damage in a multimember timber structure. The laboratory tests showed that the method can correctly detect and locate a simulated pocket of decay inflicted at the end of a girder as well as detect a notch removed from the midspan of a girder. The tests showed that the method can correctly detect damage simultaneously at two locations within the bridge, but also that large magnitudes of damage at one location can mask smaller magnitudes of damage at another location. When a calibrated baseline model is used to represent the undamaged state of the bridge, the results show that the method of nondestructive evaluation is able to detect each case of inflicted damage, but with some increase in localization error.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bolton, R., Stubbs, N., Park, S., and Choi, H. (1998). Analysis of lavic road overcrossing field data, Texas A&M University Press, Engineering Technology, Lubbock, Tex.
Emerson, R. N., Pollock, D. G., Kainz, J. A., Fridley, K. J., McLean, D. I., and Ross, R. J. (1998). “Nondestructive evaluation techniques for timber bridges.” Proc., 1998 World Conf. on Timber Engineering (WCTE), Lausanne, Switzerland, 670–677.
Garcia, G., and Stubbs, N.(1996). “Application of pattern recognition to damage localization.” Microcomput. Civ. Eng., 11, 395–409.
Park, S., and Stubbs, N.(1995). “Reconstruction of mode shapes using Shannon's sampling theorem and its application to nondestructive damage localization algorithm.” Proc. SPIE, 2446, 280–292.
Park, S., Stubbs, N., Bolton, R., Choi, S., and Sikorsky, C.(2001). “Field verification of the damage index method in a concrete box-girder bridge via visual inspection.” Int. J. Comput. Aided Civil and InfraStructure Eng., 16, 58–70.
Peterson, S. T., McLean, D. I., Symans, M. D., Pollock, D. G., Cofer, W. F., Emerson, R. N., and Fridley, K. J.(2001a). “Application of dynamic system identification to timber beams: I.” J. Struct. Eng., 127(4), 418–425.
Peterson, S. T., McLean, D. I., Symans, M. D., Pollock, D. G., Cofer, W. F., Emerson, R. N., and Fridley, K. J.(2001b). “Application of dynamic system identification to timber beams: II.” J. Struct. Eng., 127(4), 426–432.
Stubbs, N., and Garcia, G.(1996). “Application of pattern recognition to damage localization.” Microcomput. Civ. Eng., 11, 411–419.
Stubbs, N., and Kim, J. T.(1996). “Damage localization in structures without baseline modal parameters.” AIAA J., 34(8), 1644–1649.
Stubbs, N., Kim, J. T., and Farrar, C. R. (1995). “Field verification of a nondestructive damage localization and severity estimation algorithm,” Proc., 13th Int. Modal Analysis Conf., Nashville, Tenn., 210–218.
Stubbs, N., and Osegueda, R.(1990a). “Global nondestructive damage evaluation in solids.” Int. J. Anal. Exp. Modal Anal., 5(2), 67–79.
Stubbs, N., and Osegueda, R.(1990b). “Global damage detection in solids—Experimental verification.” Int. J. Anal. Exp. Modal Anal., 5(2), 81–97.
Stubbs, N., and Park, S.(1996). “Optimal sensor placement for mode shapes via Shannon's sampling theorem.” Microcomput. Civ. Eng., 11, 411–419.
Stubbs, N., Park, S., and Sikorski, C. (1997). “A general methodology to non-destructively evaluate bridge structural safety.” Technical Rep. No. NDD 04-97-04 Submitted to State of California, Dept. of Transportation, Sacramento, Calif., Texas Engineering Experimental Station, Texas A&M Univ., College Station, Tex.
Stubbs, N., Park, S., Sikorski, C., and Choi, S.(2000). “A global non-destructive damage assessment methodology for civil engineering structures.” Int. J. Syst. Sci., 31(11), 1361–1373.
Stubbs, N., Sikorsky, C., Park, S., Choi, S., and Bolton, R. (1998). “A methodology to nondestructively evaluate the structural properties of bridges.” Proc., 5th CALTRANS Seismic Research Workshop, California Dept. of Transportation Service Center, Sacramento, Calif.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 129 • Issue 1 • January 2003
Pages: 116 - 124
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Apr 10, 2001
Accepted: Apr 2, 2002
Published online: Dec 13, 2002
Published in print: Jan 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.