Finite-Element Analysis of Steel–Concrete Composite Plate Girder
Publication: Journal of Structural Engineering
Volume 128, Issue 9
Abstract
This paper deals with finite-element (FE) modeling and nonlinear analysis of steel–concrete composite plate girders under negative bending and shear loading. A three-dimensional FE model, using a general purpose finite-element software, has been used to carry out the nonlinear analysis. One steel plate girder and four composite plate girders tested to failure by other researchers have been analyzed by the FE model proposed in the study. Various models, which attempted to overcome the difficulties in modeling of steel–concrete composite plate girders, are presented and discussed in this paper. Results obtained from the FE analysis are compared with the corresponding experimental results. It is observed from the comparison that the proposed nonlinear FE model is capable of predicting the ultimate load behavior of steel–concrete composite plate girders to an acceptable accuracy.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS theory manual, version 5.8, (1998). Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, R.I.
ABAQUS user’s manual, version 5.8, (1998). Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, R.I.
Allison, R. W., Johnson, R. P., and May, I. M.(1982). “Tension field action in composite plate girders.” Proc. Inst. Civ. Eng., Struct. Build., 73, part 2, 255–276.
Arda, T. S., and Mengene, N.(1995). “Strength of composite beams with web concrete under negative bending.” J. Struct. Eng. 121(8), 1170–1174.
Ayoub, A., and Filippou, F. C.(2000). “Mixed formulation of nonlinear steel–concrete composite beam element.” J. Struct. Eng., 126(3), 371–381.
Basler, K.(1961). “Strength of plate girders in shear.” J. Struct. Div. ASCE, 87(ST7), 151–180.
Carreira, D. J., and Chu, K. H.(1985). “Stress–strain relationship for plain concrete in compression.” ACI J., Proc., 82(11), 797–804.
Cedolin, L., and Poli, S. D.(1977). “Finite element studies of shear-critical R/C beams.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 103(EM3), June, 395–410.
Cooper, P. B., Lew, H. S., and Yen, B. T.(1964). “Welded constructional alloy plate girders.” J. Struct. Div. ASCE, 90, 1–36.
Dekker, N. W., Kemp, A. R., and Trinchero, P.(1995). “Factors influencing the strength of continuous composite beams in negative bending.” J. Constr. Steel Res., 34(2–3), 161–185.
Dorey, A., Cheng, B., and Roger, J. J. (1997). “Behavior of composite beams with no flexural steel under negative moment.” Proc., Structures-Design, Concrete and Reinforced Concrete Structures, Bridges Annual Conference, Canadian Society for Civil Engineering, Montréal, 7, 281–290.
Evans, H. R., Porter, D. M., and Rockey, K. C. (1978). “The collapse behavior of plate girders subjected to shear and bending.” Proc., Int. Assoc. Bridge Struct. Eng., Honggerberg, Zurich, Switzerland, 18–78.
Fabrrocino, G., Manfredi, G., and Cosenza, E.(2000). “Analysis of continuous composite beams including partial interaction and bond.” J. Struct. Eng., 126(11), 1288–1294.
Lee, M. M. K.(1990). “Numerical study of plate girder webs with holes.” Proc. Inst. Civ. Eng., Struct. Build., 89, part 2, 183–206.
Lloyd C.P.- Y. (1981). Design of composite steel-concrete structures, Surrey University Press, London, 14–18.
Mackey, S.(1971). “Investigation of plate girder behavior under load.” Proc. Inst. Civ. Eng., Struct. Build., Suppl. (xiv), 285–306.
Manfredi, G., Fabbrocino, G., and Cosenza, E.(1999). “Modeling of steel-concrete composite beams under negative bending.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 125(6), 654–662.
Narayanan, R., Al-Amery, R. I. M., and Roberts, T. M.(1989). “Shear strength of composite plate girders wiht rectangular web cutouts.” J. Constr. Steel Res., 12(2), 151–166.
Narayanan, R., and Rockey, K. C.(1981). “Ultimate load capacity of plate girders with webs containing circular cutouts.” Proc. Inst. Civ. Eng., Struct. Build., 71, part. 2, 845–864.
Nethercot, D. A., and Ahmed, B. (1996). “Numerical modeling of composite connections and composite frames.” Composite construction in steel and concrete-III, Proc., Engineering Foundation Conf., ASCE, New York, 809–822.
Porter, D. M., Rockey, K. C., and Evans, H. R.(1975). “The collapse behavior of plate girders loaded in shear.” Struct. Eng., 53(8), 313–325.
Porter, D. M., and Cherif, Z. A. E. (1987). “Ultimate shear strength of thin webbed steel and concrete composite girders.” Proc., Int. Conf., on Steel and Aluminium Structures, Cardiff, UK, R. Narayanan, ed., Elsevier London, 55–64.
Ramm, W., and Elz, Stephan (1997). “Behavior and cracking of slabs as part of composite beams in regions with negative bending moments.” Proc., Engineering Foundation Conf., ASCE, New York, 871–886.
Rex, O. C.and Easterling, W. S.(2000). “Behavior and modeling of reinforced composite slab in tension.” J. Struct. Eng., 126(7), 764–771.
Roberts, T. M., and Al-Amery, R. I. M.(1991). “Shear strength of composite plate girders with web cutouts.” J. Struct. Eng., 117(7), 1897–1910.
Rockey, K. C., and Skaloud, M.(1972). “The ultimate load behavior of plate girders loaded in shear.” Struct. Eng., 50(1), 29–48.
Sebastian, W. M., and McConnel, R. E.(2000). “Nonlinear FE analysis of steel-concrete composite structures.” J. Struct. Eng., 126(6), 662–674.
Tehami, M.(1997). “Local buckling in class 2 continuous composite beams.” J. Constr. Steel Res., 43(1–3), 141–159.
Thevendran, V., Chen, S., Shanmugam, N. E., and Liew, J. Y. R.(1999). “Nonlinear analysis of steel-concrete composite beams curved in plan.” Finite Elem. Anal. Design, 32(3), 125–139.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Feb 7, 2001
Accepted: Jan 3, 2002
Published online: Aug 15, 2002
Published in print: Sep 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.