Experimental Verification of Seismic Response of Building Frame with Adaptive Sliding Base-Isolation System
Publication: Journal of Structural Engineering
Volume 128, Issue 8
Abstract
The paper presented herein investigates the ability of an adaptive seismic isolation system to protect structures subjected to disparate earthquake ground motions. The isolation system consists of sliding isolation bearings in combination with an adaptive hydraulic damper. The damping capacity of the hydraulic damper can be modified in real time to respond to the effects that the earthquake ground motion has on the structure. An experimental laboratory implementation of the adaptive isolation system within a scale-model building structure is described. Analytical models of the isolation system components and the test structure are developed and calibrated through experimental system identification tests. Results from experimental shaking table tests are then used to validate the results from numerical simulations which utilized the analytical models. Although the adaptive base-isolation system results in a complex nonlinear dynamic system, the analytical predictions agreed reasonably well with the experimental test data. The experimental and analytical results demonstrate that, for both near-field (pulse-type) and far-field earthquake ground motions, an adaptive sliding base isolation system is capable of reducing the interstory drift response of structures while simultaneously limiting the displacement response of the isolation system.
Get full access to this article
View all available purchase options and get full access to this article.
References
Agrawal, A. K., and Yang, J. N. (2000). “A semi-active hybrid isolation system for buildings subjected to near-field earthquakes.” Proc., 14th Conf. on Analysis and Computation held in Conjunction with ASCE Structures Congress 2000, ASCE, Philadelphia, May, available on CD-Rom only.
Constantinou, M. C., Mokha, A., and Reinhorn, A. M.(1990). “Teflon bearings in base isolation II: modeling.” J. Struct. Eng., 116(2), 455–474.
Constantinou, M. C., Soong, T. T., and Dargush, G. F. (1998). “Passive energy dissipation systems for structural design and retrofit,” MCEER Monograph No. 1, Multidisciplinary Center for Earthquake Engineering Research, State Univ. of New York, Buffalo, N.Y.
dSPACE. (1996). Real-time interface to simulink 2, dSPACE GmbH, Paderborn, Germany.
Feng, M. Q., Shinozuka, M., and Fujii, S.(1993). “Friction-controllable sliding isolation system.” J. Eng. Mech., 119(9), 1845–1864.
Fujita, T., Shimazaki, M., Hayamizu, Y., Aizawa, S., Higashino, M., and Haniuda, N.(1994). “Semiactive seismic isolation system using controllable friction damper.” Bull. ERS, 27, 21–31.
Iwan, W. D. (1996) “Implications of measured near-field ground motion on structural response.” Proc., Structures Congress XIV, Chicago, April, 1213–1220.
Johnson, E. A., Ramallo, J. C., Spencer, B. F., and Sain, M. K. (1999). “Intelligent base isolation systems.” Proc., 2nd World Conf. on Structural Control, Kyoto, Japan, June, 367–376.
Kelly, J. M.(1999). “The role of damping in seismic isolation.” Earthquake Eng. Struct. Dyn., 28, 3–20.
Madden, G. J. (1999). “Adaptive sliding base isolation systems for seismic protection of buildings.” MS thesis, Dept. of Civil and Environmental Engineering, Washington State Univ., Pullman, Wash.
Madden, G. J., Symans, M. D., and Wongprasert, N.(2002). “Analytical and numerical study of a smart sliding base isolation system for seismic protection of buildings.” Int. J. Comput.-Aided Civ. Infrastruct. Eng.
Special Issue on Smart Civil Infrastructure Systems, in press.
Makris, N.(1997). “Rigidity-plasticity-viscosity: can electrorheological dampers protect base-isolated structures from near-source ground motions?” Earthquake Eng. Struct. Dyn., 26, 571–591.
MathWorks (1997). MATLAB: The language of technical computing, The MathWorks, Inc., Natick, Mass.
Nagarajaiah, S. (1994). “Fuzzy controller for structures with hybrid isolation systems.” Proc., 1st World Conf. on Structural Control, Los Angeles, August, TA2-67–TA2-76.
Nagarajaiah, S., Sahasrabudhe, S., and Iyer, R. (2000). “Seismic response of sliding isolated bridges with smart dampers subjected to near source ground motions.” Proc., 14th Conf. on Analysis and Computation held in Conjunction with ASCE Structures Congress 2000, ASCE, Philadelphia, May, available on CD-Rom only.
Ramallo, J. C., Johnson, E. A., Spencer, B. F., and Sain, M. K. (2000). “ “Smart” base isolation systems,” Proc., 14th Conf. on Analysis and Computation held in Conjunction with ASCE Structures Congress 2000, ASCE, Philadelphia, May, available on CD-Rom only.
Riley, M. A. (1996). “Experimental implementation and design of a hybrid control system with actuator-structure interaction.” PhD dissertation, Dept. of Civil Engineering, State Univ. of New York at Buffalo, Buffalo, N.Y.
Sadek, F., and Mohraz, B.(1998). “Semiactive control algorithms for structures with variable dampers.” J. Eng. Mech., 124(9), 981–990.
Sahasrabudhe, S., Nagarajaiah, S., and Hard, C. (2000). “Experimental study of sliding isolated buildings with smart dampers subjected to near-source ground motions.” Proc., 14th ASCE Engineering Mechanics Conference, Austin, Tex., May, available on CD-Rom only.
Soong, T. T., and Constantinou, M. C. (1994). Passive and active structural vibration control in civil engineering, Springer New York.
Symans, M. D., and Constantinou, M. C.(1997). “Experimental testing and analytical modeling of semiactive fluid viscous dampers for seismic protection.” J. Intell. Mater. Syst. Struct., 8(8), 644–657.
Symans, M. D., and Constantinou, M. C.(1999). “Semi-active control systems for seismic protection of structures: a state-of-the-art review.” Eng. Struct., 21, 469–487.
Symans, M. D., and Kelly, S. W.(1999). “Fuzzy logic control of a seismically isolated bridge structure.” Earthquake Eng. Struct. Dyn., 28(1), 37–60.
Symans, M. D., Madden, G. J., and Wongprasert, N. (2000). “Experimental study of an intelligent base isolation system for buildings.” Proc., 12th World Conf. on Earthquake Engineering, Auckland, New Zealand.
Twitchell, B. S. (1998). “Analytical modeling and experimental identification of a uniaxial seismic simulator.” MS thesis, Dept. of Civil and Environmental Engineering, Washington State Univ., Pullman, Wash.
Utkin, V. I. (1992). Sliding modes in control optimization, Springer, Berlin.
Wen, Y. K.(1976). “Method of random vibration of hysteretic systems.” J. Eng. Mech. Div., 102(2), 249–263.
Yang, J. N., Wu, J. C., Agrawal, A. K., and Li, Z. (1994). “Sliding mode control of seismic-excited linear and nonlinear civil engineering structures.” Tech. Rep. No. NCEER-94-0017, National Center for Earthquake Engineering Research, State Univ. of New York at Buffalo, Buffalo, N.Y.
Yang, J. N., Wu, J. C., Kawashima, K., and Unjoh, S.(1995). “Hybrid control of seismic-excited bridge structures.” Earthquake Eng. Struct. Dyn., 24, 1437–1451.
Zayas, V. A., Low, S. S., and Mahin, S. A. (1987). “The FPS earthquake resisting system: experimental report.” Rep. No. UCB/EERC-87/01, Earthquake Engineering Research Center, Univ. of California at Berkeley, Berkeley, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Nov 14, 2000
Accepted: Apr 30, 2001
Published online: Jul 15, 2002
Published in print: Aug 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.