Distributed Structural Damage Generated by High-Frequency Ground Motion
Publication: Journal of Structural Engineering
Volume 128, Issue 3
Abstract
Underground explosion generates high-frequency, short-duration, and large-amplitude ground motions which may cause damage to nearby surface structures. The commonly used damage assessment method in earthquake engineering cannot capture local damages and propagation properties of stress wave produced in a structure by such high-frequency ground motion. In the present study, damage assessment is developed at the material level for reinforced concrete structure excited by underground-explosion-induced ground motion. A numerical method of wave propagation in nonlinear and composite media is adopted to assess wave motion and structural damage of a two-story frame located at different surface distances from the underground explosion epicenter. A fracture indicator determined by equivalent tensile strain is defined to assess concrete damage, and a plastic indicator based on effective plastic strain is used to identify the plastic state of reinforcement. Ground velocity at the structural supports is used as input. The proposed material model is implemented in a commercial software AUTODYN through its user-supplied subroutines. Distributed concrete damage induced by high-frequency response is simulated. The effect of vertical ground motion is illustrated clearly. The numerical results show that the current design code based on ground motion peak particle velocity alone is rather conservative.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI Committee 318. (1995). “Building code requirements for structural concrete (ACI318-95) and commentary (ACI 318R-95).” American Concrete Institute, Farmington Hills, Mich.
Century Dynamics, Inc. (1997). AUTODYN user manual; revision 3.0.
Dowding, C. H. (1985). Blast vibration monitoring and control, Prentice-Hall, Englewood Cliffs, N.J.
Doyle, J. F. (1989). Wave propagation in structures: An FFT-based spectral analysis methodology, Springer-Verlag, New York.
Edwards, A. T., and Northwood, T. D.(1960). “Experimental studies of the effects of blasting on structures.” Engineer (London), 210, 538–546.
German Standards Organization. (1984). DIN 4150, Vibrations in building construction, Berlin.
Ma, G., Hao, H., and Zhou, Y.(1998). “Modelling of wave propagation induced by underground explosion.” Comp. Geotechn., 22(3–4), 283–303.
Mazars, J.(1986). “A description of micro and macroscale damage of concrete structures.” Eng. Fract. Mech., 25(5/6), 729–737.
Nicholls, H. R., Johnson, C. F., and Duvall, W. I. (1971). Blasting vibrations and their effects on structures, Bureau of Mines, Bulletin 656, Washington, D.C.
Odello, R. J. (1976). “Ground shock effects from accidental explosions.” Technical memorandum No. TM M-51 -76-22, Dept. of the U.S. Army Picatinny Arsenal.
Office of Surface Missing. (1977). “Surface mining reclamation and enforcement provisions.” Public law 95-87, Federal Register, 42 (No. 289).
Park, Y. J., and Ang, A. H. S.(1985). “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Div., ASCE, 111(4), 722–739.
Roufaiel, M. S. L., and Meyer, C.(1987). “Analytical modeling of hysteretic behavior of R/C frames.” J. Struct. Eng., 113(3), 429–444.
U.S. Dept. of Defense Explosive Safety Board. (1996). Ammunition and Explosive Safety Standards: DOD 6055.9-STD, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Nov 9, 1999
Accepted: Oct 10, 2001
Published online: Mar 1, 2002
Published in print: Mar 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.