Performance-Based Engineering of Wood Frame Housing: Fragility Analysis Methodology
Publication: Journal of Structural Engineering
Volume 128, Issue 1
Abstract
Recent trends in building construction have highlighted the need for improved methodologies for engineering new light-frame structures for housing and techniques for condition assessment of existing structures. The aftermath of natural disasters during the past decade, the rapid evolution of design and construction methods, and heightened expectations on the part of the public and its scrutiny of perceived and actual deficiencies in codes and code enforcement have further underscored these needs. Among the high-priority areas identified at a 1997 ASCE workshop on wood engineering research needs were behavior and performance of wood structural systems; criteria for performance assessment; and methods for condition assessment of damaged systems following natural disasters. The development of appropriate and usable fragility models and system reliability analysis tools is necessary to meet these needs and to make meaningful advances in performance-based engineering of wood frame structures. This paper provides an overview of efforts to develop such models and tools, and suggests a possible methodology for assessing probable response of light-frame residential construction exposed to various levels of natural and man-made hazards. The implementation of performance-based engineering for residential construction will enhance durability and reduce maintenance costs of the nation’s housing inventory, and will facilitate reductions in risk of death, injury, and property damage from extreme natural hazards such as earthquakes and hurricanes.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE. (1996). “Standard for load and resistance factor design (LRFD) for engineered wood construction.” AF&PA/ASCE Standard 16-95, Reston Va.
Bodig, J., Cheung, K., and Cunningham, T.(1995). “Engineered wood construction: structural properties for LRFD.” J. Struct. Eng., 121(9), 1346–1351.
Buchanan, A. H., and Barnett, J. R. (1995). “Performance-based design for fire in New Zealand.” in Restructuring America and Beyond, Proc., Struct. Congress XIII, Vol. 1, ASCE, New York, 1106–1121.
Committee on Risk Appraisal in the Development of Facilities Design Criteria. (1991). Uses of risk analysis to achieve balanced safety in building design and construction, National Academy Press, Washington, D.C.
Ellingwood, B.(1981). “Reliability of wood structural elements.” J. Struct. Div. ASCE, 107(1), 73–87.
Ellingwood, B.(1994). “Probability-based codified design: past accomplishments and future challenges.” Struct. Safety, 13(3), 159–176.
Ellingwood, B. (1998). “Reliability-based performance concept for building construction.” Structural Engineering Worldwide 1998, Paper T178-4 (CD-Rom), Elsevier, New York.
Ellingwood, B. R., Cherry, J. L., and Naus, D. J. (1999). “Fragility modeling of a steel containment with localized corrosion.” Computer Technology-99, ASME-PVP, 385, 101–105.
Ellingwood, B., MacGregor, J. G., Galambos, T. V., and Cornell, C. A.(1982). “Probability-based load criteria: load factors and load combinations.” J. Struct. Eng., 108(5), 978–997.
Ellingwood, B., and Rosowsky, D. V.(1991). “Duration of load effects in LRFD for wood construction.” J. Struct. Eng., 117(2), 584–599.
Folz, B., and Foschi, R. O.(1989). “Reliability-based design of wood structural systems.” J. Struct. Eng., 115(7), 1666–1680.
Foschi, R. O.(1984). “Reliability of wood structural systems.” J. Struct. Eng., 110(12), 2995–3015.
Foschi, R. O.(1985). “Wood floor behavior: experimental study.” J. Struct. Eng., 111(11), 2497–2508.
Fridley, K., ed. (1998). Wood engineering in the 21st century: research needs and goals, American Society of Civil Engineers, Reston, Va.
Galambos, T. V., Ellingwood, B., MacGregor, J. G., and Cornell, C. A.(1982). “Probability-based load criteria: assessment of current design practice.” J. Struct. Eng., 108(5), 978–997.
Gerhards, C., and Link, C.(1986). “Effect of loading rate on bending strength of Douglas-fir 2 by 4’s.” Forest Products. J., 36(2), 63–66.
Green, D. W., and Evans, J. W. (1987). “Mechanical properties of visually graded lumber, Vols. 1–5.” Forest Products Laboratory, USDA, Madison, Wis.
Krawinkler, H., and Seveviratna, G. D.(1998). “Pros and cons of a pushover analysis in seismic performance evaluation.” Eng. Struct., 20(4), 452–464.
International Code Council (ICC) Building Performance Code Committee. (1998). “Preliminary committee report.” Whittier, Calif.
NAHB Research Center (1994). “Assessment of damage to residential buildings caused by the Northridge Earthquake.” Upper Marlboro, Md.
NAHB Research Center (1996). “Assessment of damage to homes caused by Hurricane Opal.” Prepared for the Florida State Home Builders Association. (Final Report), Upper Marlboro, Md.
NAHB Research Center (1999a). “An industry perspective on performance guidelines for structural safety and serviceability of one- and two-family dwellings.” (Final Working Draft), Upper Marlboro, Md.
NAHB Research Center (1999b). “Evaluation of housing performance and seismic design implications in the Northridge Earthquake.” (Draft Report), Upper Marlboro, Md.
NAHB Research Center (1999c). “Housing affordability through design efficiency program. Status report: Program plan, status, and research coordination.” Summary Rep. Prepared for U.S. HUD and NAHB, Upper Marlboro, Md.
NAHB Research Center (1999d). “Reliability of conventional residential construction: assessment of roof component performance in Hurricane Andrew and typical wind regions of the United States.” Upper Marlboro, Md.
National-design specification for wood construction. (1991). American Forest and Paper Association, Washington, D.C.
“Performance criteria resource document for innovative construction.” (1977). Rep. No. NBSIR 77-1316, National Bureau of Standards, Washington, D.C. (available from NTIS).
Philpot, T. A., Rosowsky, D. V., and Fridley, K. J., (1995). “Reliability of wood joist floor systems with creep.” J. Struct. Eng., 121(6), 946–954.
Poland, C. D. (1995). “A comprehensive approach towards the development of a performance-based seismic source document.” In Restructuring America and Beyond, Proc. Struct. Congress XIII, Vol. 1, ASCE, New York, 443–446.
Rosowsky, D., and Ellingwood, B.(1991). “System reliability and load-sharing effects in light-frame wood construction.” J. Struct. Eng., 117(4), 1096–1114.
SAC Joint Venture. (1995). “Interim guidelines: evaluation, repair, modification and design of welded steel moment frames.” Rep. No. FEMA 267, Federal Emergency Management Agency, Washington, D.C.
Shinozuka, M., et al. (2000). “Statistical analysis of fragility curves.” J. Eng. Mech., 126(12), 1224–1231.
Wright, R. N., Kramer, S., and Culver, C., eds. (1973). “Building practices for disaster mitigation.” Building Science Series No. 46, National Bureau of Standards, Washington, D.C., 24 and 25.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Jan 25, 2001
Accepted: May 9, 2001
Published online: Jan 1, 2002
Published in print: Jan 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.