Design of Biaxially Loaded Short Composite Columns of Arbitrary Section
Publication: Journal of Structural Engineering
Volume 127, Issue 6
Abstract
In this paper, an iterative quasi-Newton procedure based on the Regula-Falsi numerical scheme is proposed for the rapid sectional analysis and design of short concrete-encased composite columns of arbitrary cross section subjected to biaxial bending. The stress resultants of the concrete are evaluated by integrating the concrete stress-strain curve over the compression zone. Exact integral expressions of the stress resultants for both polygonal and circular subsections are derived, and these are used to achieve an efficient and accurate analysis. The stress resultants of the encased structural steel and the steel reinforcing bars are obtained using the fiber element method. A particularly important feature of the present method is the use of the plastic centroidal axes of the cross section as the reference axes of loading in the iterative solution process. This ensures the convergence of the solution process for all cross-sectional conditions. Numerical examples are presented to demonstrate the validity, accuracy, and capability of the proposed method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Concrete Institute (ACI). ( 1992). “Building code requirements for structural concrete and commentary.” ACI 318, ACI 318R, Detroit.
2.
American Institute of Steel Construction (AISC). ( 1986). Manual of steel construction—Load and resistance factor design, Chicago.
3.
American Institute of Steel Construction (AISC). ( 1993). Load and resistance factor design specification for structural steel buildings, Chicago.
4.
Brondum-Nielsen, T. ( 1985). “Ultimate flexural capacity of cracked polygonal concrete sections under biaxial bending.” ACI Struct. J., 82(6), 863–870.
5.
Commission of the European Communities (CEC). ( 1984). “Common unified rules for composite steel and concrete structures.” Eurocode 4, Brussels.
6.
Commission of the European Commuinities (CEC). ( 1994). “Design of composite steel and concrete structures.” Eurocode 4, Brussels.
7.
Johnson, R. P., and Smith, D. G. E. ( 1980). “A simple design method for composite columns.” The Struct. Engr., London, 58A(3), 85–93.
8.
Lachance, L. (1982). “Ultimate strength of biaxially loaded composite sections.”J. Struct. Div., ASCE, 108(10), 2313–2329.
9.
Mirza, S. A. ( 1989). “Parametric study of composite column strength variability.” J. Constr. Steel Res., 14, 121–137.
10.
Mirza, S. A., and Skrabek, B. W. (1991). “Reliability of short composite beam-column strength interaction.”J. Struct. Engrg., ASCE, 117(8), 2320–2339.
11.
Muñoz, P. R., and Hsu, C. T. T. (1997). “Biaxially loaded concrete-encased composite columns: Design equation.”J. Struct. Engrg., ASCE, 123(12), 1576–1585.
12.
Rodriguez, J. A., and Aristizabal-Ochoa, J. D. (1999). “Biaxial interaction diagrams for short RC columns of any cross section.”J. Struct. Engrg., ASCE, 125(6), 672–683.
13.
Roik, K., and Bergmann, R. ( 1985). “Composite columns—Design and examples for construction.” Composite and mixed construction, C. W. Roeder, ed., ASCE, New York, 267–278.
14.
Roik, K., and Bergmann, R. ( 1990). “Design method for composite columns with unsymmetrical cross sections.” J. Constr. Steel Res., 15, 153–168.
15.
Rotter, J. M. (1985). “Rapid exact inelastic biaxial bending analysis.”J. Struct. Engrg., ASCE, 111(12), 2659–2674.
16.
El-Tawil, S., Sanz-Picon, C. F., and Deierlein, G. G. ( 1995). “Evaluation of ACI 318 and AISC (LRFD) strength provision for composite beam-columns.” J. Constr. Steel Res., 34, 103–123.
17.
Wang, C. K., and Salmon, C. G. ( 1973). Reinforced concrete design, 2nd Ed., Intext Educational Publishers, New York.
18.
Yau, C. Y., Chan, S. L., and So, A. K. W. ( 1993). “Biaxial bending design of arbitrarily shaped reinforced-concrete column.” ACI Struct. J., 90(3), 269–278.
19.
Yen, J. Y. R. (1991). “Quasi-Newton method for reinforced-concrete column analysis and design.”J. Struct. Engrg., ASCE, 117(3), 657–666.
Information & Authors
Information
Published In
History
Received: Mar 30, 2000
Published online: Jun 1, 2001
Published in print: Jun 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.