Concrete-Steel Composite Coupling Beams. I: Component Testing
Publication: Journal of Structural Engineering
Volume 127, Issue 6
Abstract
A viable alternative to reinforced concrete coupling beams with heavily reinforced diagonal struts is steel or steel-concrete composite beams. A limited number of previous studies have examined various issues related to design of steel coupling beams. In this and a companion paper, cyclic response of steel-concrete composite coupling beams is addressed. The research results show that nominally reinforced encasement around steel coupling beams contributes to the strength and stiffness, and web stiffener plates can essentially be eliminated as the encasement provides adequate lateral stability for the shear-yielding web coupling beams. Although current design practice is conservative in terms of design and detailing of the beam, the overall behavior of composite coupling beams is not necessarily conservative. The design needs to consider the additional stiffness and strength in order to ensure proper calculation of design forces in the walls and coupling beams, and to dissipate the input energy through formation of plastic hinges in the beam and not in the connection region. Revision of current design guidelines is recommended.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aktan, A. E., and Bertero, V. V. ( 1981). “The seismic-resistant design of R/C coupled structural walls.” Rep. No. UCB/EERC-81/07, Earthquake Engrg. Res. Ctr., University of California, Berkeley, Calif.
2.
American Concrete Institute (ACI). ( 1995). “Building code requirements for reinforced concrete and commentary.” ACI 318-95/ACI 318R-95, Detroit.
3.
American Institute of Steel Construction (AISC). ( 1992). Seismic provisions for structural steel buildings, Chicago.
4.
Bertero, V. V. ( 1980). “Seismic behavior of R/C wall structural walls.” Proc., 7th World Conf. of Earthquake Engrg.
5.
Bertero, V. V., Popv, E. P., Wang, T. Y. ( 1974). “Hysteretic behavior of reinforced concrete flexural members with web reinforcement.” Rep. No. UCB/EERC 74-9, Earthquake Engrg. Res. Ctr., University of California, Berkeley, Calif.
6.
Building Seismic Safety Council (BSSC). ( 1994). NEHRP recommended provisions for the development of seismic regulations for new buildings, Washington, D.C.
7.
Collins, M., and Mitchell, D. ( 1991). Prestressed concrete structures, Prentice-Hall, Englewood Cliffs, N.J.
8.
Gong, B., and Shahrooz, B. M. ( 1998). “Seismic behavior and design of composite coupled wall systems.” Rep. No. UC-CII 98/01, Cincinnati Infrastructure Institute, Cincinnati.
9.
Gong, B., and Shahrooz, B. M. (2001). “Concrete-steel composite coupling beams. II: Subassembly testing and design verification.”J. Struct. Engrg., 127(6), 632–638.
10.
Harries, K. A. ( 1995). “Seismic design and retrofit of coupled walls using structural steel.” PhD thesis, McGill University, Montreal.
11.
Harries, K. A., Mitchell, D., Redwood, R. G., and Cook, W. D. ( 1997). “Seismic design of coupling beams—A case for mixed construction.” Can. J. Civ. Engrg., Ottawa, 24(3), 448–459.
12.
Harries, K. A., Mitchell, D., Redwood, R. G., and Cook, W. D. ( 1998). “Seismic design and analysis of prototype coupled wall structures.” Can. J. Civ. Engrg., Ottawa, 25(5), 808–818.
13.
International Conference of Building Officials (ICBO). ( 1994). Uniform building code, Whittier, Calif.
14.
Marcakis, K., and Mitchell, D. ( 1980). “Precast concrete connections with embedded steel members.” PCI J., 25(4), 88–116.
15.
Mattock, A. H., and Gaafar, G. H. ( 1982). “Strength of embedded steel sections as brackets.” ACI J., 79(2), 83–93.
16.
Paulay, T. (1971). “Coupling beams of reinforced concrete shear walls.”J. Struct. Div., ASCE, 97(3), 843–862.
17.
Paulay, T. ( 1977). “Coupling beams of reinforced concrete shear walls.” Proc., Workshop on Earthquake-Resistant Reinforced Concrete Build. Constr., Berkeley, Calif., 1452–1462.
18.
Paulay, T., and Binney, J. R. ( 1974). “Diagonally reinforced concrete beams for shear walls.” Shear in reinforced concrete, American Concrete Institute, Detroit, 579–598.
19.
Shahrooz, B. M., Remmetter, M. E., and Qin, F. ( 1992). “Seismic response of composite coupled walls.” Composite construction in steel and concrete II, ASCE, New York, 429–441.
20.
Shahrooz, B. M., Remmetter, M. E., and Qin, F. (1993). “Seismic design and performance of composite coupled walls.”J. Struct. Engrg., ASCE, 119(11), 3291–3309.
Information & Authors
Information
Published In
History
Received: Jun 29, 2000
Published online: Jun 1, 2001
Published in print: Jun 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.