Physical Approach for Reinforced-Concrete (PARC) Membrane Elements
Publication: Journal of Structural Engineering
Volume 127, Issue 12
Abstract
A method is proposed for the analysis of the nonlinear behavior up to failure of reinforced-concrete membrane elements. The approach considers a linear elastic behavior for concrete before cracking; after cracking, the cracks are assumed as having a fixed direction and uniform spacing and cracked reinforced concrete is modeled as an orthotropic material. The basic element of cracked reinforced-concrete membrane is defined and the related stiffness matrix is proposed. The quantities that govern the problem are the opening and the sliding of the crack lips, as well as the strain of the concrete struts that are located between cracks. Applied to a local analysis of cracked reinforced concrete, the above variables allow for the effective modeling of compatibility and equilibrium conditions and take into account phenomena such as aggregate interlock, tension stiffening, and dowel action. To verify the reliability and capability of the proposed method, some comparisons with experimental observations of relevant tests are made.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baumann, T. ( 1972). “Zur Frage der Netzbewehrung von Flachentrag-werken.” Der Bauingenieur, 47(10), Berlin, 367–377 (in German).
2.
Bažant, Z. P., and Gambarova, P. G. (1980). “Rough cracks in reinforced concrete.”J. Struct. Engrg., ASCE, 106(4), 819–842.
3.
Belarbi, A., and Hsu, T. T. C. ( 1995). “Constitutive laws of softened concrete in biaxial tension-compression.” ACI Struct. J., 92(5), 562–573.
4.
Bhide, B. S., and Collins, M. P. ( 1989). “Influence of axial tension on shear capacity of reinforced concrete members.” ACI Struct. J., 86(5), 570–580.
5.
Comité Euro-International du Beton–Fédération International de la Precontrainte (CEB-FIP). ( 1993). Model code 1990, 1993, (MC90), Thomas Telford, London.
6.
Cerioni, R., Ferretti, D., and Iori, I. ( 1998). “Torsional behaviour of prestressed high-strength concrete beams.” Proc., EURO-C 1998 Conf. on Computational Modelling of Concrete Struct., 797–806.
7.
Cerioni, R., and Iori, I. ( 1995). “Sul comportamento di elementi bidimensionali a lastra, in conglomerato armato e soggetti ad azioni taglianti ai bordi.” Studi e Ricerche, Milan, Italy, 16, 151–171 (in Italian).
8.
Cerioni, R., and Iori, I. ( 1996). “Sul comportamento di travi in conglomerato armato normale e a alta resistenza soggette a torsione.” Studi e Ricerche, Milan, Italy, 17, 99–120 (in Italian).
9.
Cerioni, R., and Iori, I. ( 1997). “Sul comportamento di lastre presollecitate in conglomerato armato, soggette a stati piani di sforzo.” Proc., Giornate AICAP, 111–120 (in Italian).
10.
Cervenka, V. ( 1985). “Constitutive model for cracked reinforced concrete.” ACI J., 71, 396–408.
11.
Collins, M. P. ( 1973). “Torque-twist characteristics of reinforced concrete beams.” Inelasticity and non-linearity in structural concrete, Study No. 8, University of Waterloo Press, Waterloo, Ont., Canada, 211–231.
12.
Collins, M. P., Vecchio, F. J., and Mehlhorn, G. ( 1985). “An international competition to predict the response of reinforced concrete panels.” Can. J. Civ. Engrg., Ottawa, 12(3), 626–644.
13.
Elfgren, L. ( 1972). “Reinforced concrete beams loaded in combined torsion, bending and shear.” Publ. 71:3, Div. of Concrete Struct., Chalmers University of Technology, Goteborg, Sweden.
14.
Gambarova, P. G. ( 1983). “Sulla trasmissione del taglio in elementi bidimensionali piani di c.a. fessurati.” Proc., Giornate AICAP, 141–156 (in Italian).
15.
Giuriani, E. ( 1981). “On the effective axial stiffness of a bar in cracked concrete.” Bond in concrete, P. Bartos, ed., Dept. of Civ. Engrg., College of Technology, Paisley, Scotland, 107–126.
16.
Hsu, T. T. C. ( 1988). “Softening truss model theory for shear and torsion.” ACI Struct. J., 85(6), 624–635.
17.
Hsu, T. T. C., and Zhang, L. X. ( 1996). “Tension stiffening in reinforced concrete membrane elements.” ACI Struct. J., 93(1), 108–115.
18.
Iori, I. ( 1987). “Sul comportamento torsionale di elementi strutturali in conglomerato armato precompresso.” Proc., Giornate AICAP, 247–260 (in Italian).
19.
Iori, I., and Dei Poli, S. ( 1985). “Sulla torsione di elementi strutturali in cemento armato.” L'Industria Italiana del Cemento, 2, 121–129 (in Italian).
20.
Kaufmann, W., and Marti, P. (1998). “Structural concrete: Cracked membrane model.”J. Struct. Engrg., ASCE, 124(12), 1467–1475.
21.
Lampert, P., and Thürlimann, B. ( 1968). “Torsionversuche an Stalbetonbalken.” Institut für Baustatik ETH, Bericht, 6506-2, Zürich, Switzerland.
22.
Leonhardt, F., and Schelling, G. ( 1974). “Torsionsversuche an Stahlbetonbalken.” Deutsher Ausschuss für Stahlbeton, D.A.f. St., Heft 239, Ernst & Sohn, Berlin (in German).
23.
Mitchell, D., and Collins, M. P. ( 1974). “Diagonal compression field theory—A rational model for structural concrete.” ACI J. Proc., 71(8), 396–408.
24.
Pang, X. B., and Hsu, T. T. C. ( 1995). “Behavior of reinforced concrete membrane elements in shear.” ACI Struct. J., 92(6), 665–679.
25.
Pang, X. B., and Hsu, T. T. C. ( 1996). “Fixed angle softened truss model for reinforced concrete.” ACI Struct. J., 93(2), 197–207.
26.
Vecchio, F. J., and Collins, M. P. ( 1982). “Response of reinforced concrete to in-plane shear and normal stresses.” Publ. No. 82-03, Dept. of Civ. Engrg., University of Toronto, Toronto.
27.
Vecchio, F. J., and Collins, M. P. ( 1986). “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI Struct. J., 83(2), 219–231.
28.
Walraven, J. C. (1981). “Fundamental analysis of aggregate interlock.”J. Struct. Engrg., ASCE, 107(11), 2245–2270.
29.
Walraven, J. C., and Reinhardt, H. W. ( 1981). “Theory and experiments on the mechanical behaviour of cracks in plain and reinforced concrete subjected to shear loading.” Heron, 26.
Information & Authors
Information
Published In
History
Received: May 30, 2000
Published online: Dec 1, 2001
Published in print: Dec 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.