Basis and Application of a Simple Interaction Formula for Steel Columns under Fire Conditions
Publication: Journal of Structural Engineering
Volume 127, Issue 10
Abstract
The Rankine method has been applied to steel columns and frames subjected to increasing loads but maintained at ambient temperature. An original derivation of the formula, which is general and based on the virtual work principle, is provided in this paper. The Rankine formula is extended to fire conditions by taking the temperature effects on steel material into consideration. Test results show that the Rankine formula yields close but slightly unsafe predictions for axially loaded columns. On the other hand, Rankine predictions for eccentrically loaded columns are very unconservative. In view of this, the present paper presents a logical approach to modify the Rankine approach so that the predictions for both axially and eccentrically loaded columns are conservative and accurate at the same time.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Coates, R. C., Coutie, M. G., and Kong, F. K. ( 1987). Structural analysis, 3rd Ed., ELBS, Wokingham, U.K.
2.
Dwight, J. B. ( 1975). “Adaptation of Perry formula to represent the new European steel column-curves.” Steel Constr., 9(1), 10–23.
3.
European Committee for Standardization (CEN). ( 1995). “Eurocode 3: Design of steel structure. Part 1.2: General rules—Structural fire design.” ENV 1993-1-2, London.
4.
Franssen, J. M., Schleich, J. C., Talamona, D., and Twilt, L. ( 1994). “A simple model for the fire resistance of axially loaded members—Comparison with experimental results.” J. Constr. Steel Res., 37(3), 175–204.
5.
Gere, J. M., and Timoshenko, S. P. ( 1991). Mechanics of materials, 3rd Ed., Chapman & Hall, London.
6.
Horne, M. R. ( 1963). “Elastic-plastic failure loads of plane frames.” Proc., Royal Soc., London, 274(A), 343–364.
7.
Horne, M. R. ( 1979). Plastic theory of structures, Pergamon, Tarrytown, N.Y.
8.
Horne, M. R., and Merchant, W. ( 1965). The stability of frames, Pergamon, Tarrytown, N.Y.
9.
Janss, J. ( 1995). “Statistical analysis of fire tests on steel beams and columns to Eurocode 3, Part 1.2.” J. Constr. Steel Res., 33, 39–50.
10.
Rankine, W. J. M. ( 1908). Useful rules and tables, Charles Griffin & Co., London.
11.
Schleich, J. B., and Cajot, L. G. ( 1996). “Buckling curves in case of fire.” Draft Final Rep., Part I (Main Text), CEC Agreement 7210-SA 316/515/618/931, ProfilARBED-Recherches, Luxembourg.
12.
Talamona, D. ( 1995). “Buckling curves in case of fire—ECSC 7210 SA 316/515/931/618: Fire resistance of steel columns with eccentric load.” CTICM, Rep. No. INC-96/450-DT/VG Part 1, Saint-Remy-les-Chevreuse, Paris.
13.
Toh, W. S., Tan, K. H., and Fung, T. C. (2000). “Compressive resistance of steel columns in fire: The Rankine approach.”J. Struct. Engrg., ASCE, 126(3), 398–405.
Information & Authors
Information
Published In
History
Received: May 31, 2000
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.