Design of Seismic Cable Hinge Restrainers for Bridges
Publication: Journal of Structural Engineering
Volume 126, Issue 4
Abstract
The collapse of bridges due to unseating at intermediate (in-span) hinges during recent earthquakes emphasizes the need to provide an adequate number of restrainers to limit the relative displacement between frames in a bridge with inadequate hinge seat width. Current restrainer design procedures do not account for the factors affecting the earthquake response of multiple-frame bridges. A parameter study indicates that maximum hinge displacement is a function of the frame period ratio, frame ductility, and the characteristics of the ground motion. A new design procedure for hinge restrainers, based on a linearized model, is developed. The procedure accounts for the dynamic characteristics out-of-phase motion of adjacent bridge frames. Inelastic behavior of frames is accounted for by using the substitute structure method. Parameter studies and case studies using over 26 different ground motion records show that the new procedure limits and the relative hinge displacement to a designer-specified value for a wide range of bridges.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bridge design specifications manual. (1990). California Department of Transportation, Calif.
2.
Clough, R. W., and Penzien, J. (1993). Dynamics of structures, 2nd Ed., McGraw-Hill, New York.
3.
Comartin, C., Green, M., and Tubbesing, S. (1995). “The Hyogo-Ken Nanbu earthquake.” Preliminary Reconnaissance Rep., Earthquake Engineering Research Institute, Oakland, Calif.
4.
Der Kiureghian, A. (1980). “A response spectrum method for random vibrations.” Rep. No. UBC/EERC-80/15, Earthquake Engrg. Res. Ctr., University of California, Berkeley, Calif.
5.
DesRoches, R., and Fenves, G. L. (1997a). “Earthquake response and analysis of a curved highway bridge.” Earthquake Spectra, 13(3), 363–387.
6.
DesRoches, R., and Fenves, G. L. (1997b). “New design and analysis procedures for intermediate hinges in multiple-frame bridges.” Rep. No. UBC/EERC-97/12, Earthquake Engrg. Res. Ctr., University of California, Berkeley, Calif.
7.
Gulkan, J., and Sozen, M. (1974). “Inelastic response of reinforced concrete structures to earthquake motion.” ACI Struct. J., 71(12), 604–610.
8.
Jennings, P. C. (1971). “Engineering features of the San Fernando earthquake of February 9, 1971.” Rep. No. EERL-76/18, Earthquake Engrg. Res. Lab., California Institute of Technology, Pasadena, Calif.
9.
Kasai, K., Jagiasi, A. R., and Jeng, V. (1996). “Inelastic vibration phase theory for seismic pounding mitigation.”J. Struct. Engrg., ASCE, 122(10), 1136–1146.
10.
Kawashima, K., and Sato, T. (1996). “Relative displacement response spectrum and it's application.” Proc., 11th World Conf. on Earthquake Engrg.
11.
MacRae, G., Priestley, M. J. N., and Tao, J. (1994). “P-delta designs in seismic regions.” Rep. No. UCSD/SSRP-93/05, Struct. Sys. Res. Proj., University of California, San Diego, La Jolla, Calif.
12.
Moehle, J. P. (1995). “Northridge earthquake of January 17, 1994: Reconnaissance report, Volume 1—Highway bridges and traffic management.” Earthquake Spectra, 11(3), 287–372.
13.
Penzien, J. (1997). “A CQC method for relative displacement between buildings.” Earthquake Engrg. and Struct. Dyn., 25(1), 265–278.
14.
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1995). Seismic design and retrofit of bridges. Wiley-Interscience, New York.
15.
Saiidi, M., Maragakis, E., Abdel-Ghaffar, S., Feng, S., and O'Connor, D. (1993). “Response of bridge hinge restrainers during earthquakes—field performance, analysis, and design.” Rep. No. CCEER 93/06, Ctr. for Civ. Engrg. Earthquake Research, University of Nevada, Reno, Nev.
16.
Saiidi, M., Maragakis, E., and Feng, S. (1996). “Parameters in bridge restrainer design for seismic retrofit.”J. Struct. Engrg., ASCE, 122(1), 61–68.
17.
Saiidi, M., and Sozen, M. A. (1979). “Simple and complex models for nonlinear seismic response of reinforced concrete structures.” Rep. No. UILU-ENG-79-2013, Struct. Res. Ser. No. 465, University of Illinois, Urbana, Ill.
18.
Standard specifications for highway bridges. (1992). AASHTO, Washington, D.C.
19.
Takahashi, H. ( 1990). “Specifications for highway bridges. Part 5: Seismic design.” Japan Society of Civil Engineers, Tokyo.
20.
Trochalakis, P., Eberhard, M. O., and Stanton, J. F. (1997). “Design of seismic restrainers for in-span hinges.”J. Struct. Engrg., ASCE, 123(4), 469–478.
21.
Yang, Y. S., Priestley, M. J. N., and Ricles, J. (1994). “Longitudinal seismic response of bridge frames connected by restrainers.” Rep. No. UCSD/SSRP-94/09, Struct. Sys. Res. Proj., University of California, San Diego, La Jolla, Calif.
Information & Authors
Information
Published In
History
Received: Jun 29, 1998
Published online: Apr 1, 2000
Published in print: Apr 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.