Cross-Sectional Modes in Impact-Echo Testing of Concrete Structures
Publication: Journal of Structural Engineering
Volume 126, Issue 2
Abstract
The impact-echo method is a promising technique for the detection of damage in concrete structures, particularly when applied to plate-like structures. However, when the technique is applied to beam-like rather than plate-like structures the resulting amplitude spectra are complex and difficult to interpret. The complications are due to the excitation of cross-sectional modes of vibration in the beam. This paper discusses an investigation into the nature of these modes, shows that their frequency is lowered by the presence of a large void, and discusses the potential of using these modes for nondestructive testing. Plane strain finite-element models have been used to model cross-sectional modes in the presence of both grouted and ungrouted ducts. The results from these analyses are described together with an experimental validation using a beam containing a large duct, some of which is grouted and some of which contains a void. Results are compared with previous analytical findings and found to be in agreement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ANSYS user's manual for version 5.0a, Volume 1. (1992). Swanson Analysis Systems Inc., Houston, Pa.
2.
Ghorbanpoor, A. (1993). “Evaluation of post tensioned concrete bridge structures by the impact-echo technique.” FHWA-RD-92-096, U.S. Dept. of Transportation, Federal Highway Administration, Washington, D.C.
3.
Jaeger, B. J., Sansalone, M. J., and Poston, R. W. (1996). “Detecting voids in grouted tendon ducts of post-tensioned concrete structures using the impact-echo method.” ACI Struct. J., 93(4), 462–473.
4.
Lin, Y. ( 1992). “Impact response of bars with applications to concrete beams, columns and shafts,” PhD thesis, Cornell University, Ithaca, N.Y.
5.
Lin, Y., and Sansalone, M. (1992a). “Detecting flaws in concrete beams and columns using the impact-echo method.” ACI Mat. J., 89(4), 394–405.
6.
Lin, Y. C., and Sansalone, M. (1992b). “Transient response of thick circular and square bars subjected to transient elastic impact.” J. Acoust. Soc. Am., 91, 885–893.
7.
Lin, Y., and Sansalone, M. (1992c). “Transient response of thick rectangular bars subjected to transverse elastic impact.” J. Acoust. Soc. Am., 91, 2674–2685.
8.
Martin, J., Hardy, M. S. A., Usmani, A. S., and Forde, M. C. (1995). “Quantifying the defects in post-tensioned bridges using the impulse ultrasonics.” Proc., 6th Int. Conf. on Struct. Faults and Repair, Vol 1, 209–216.
9.
Sansalone, M. (1997). “Impact-echo: The complete story.” ACI Struct. J., 94(6), 777–786.
10.
Sansalone, M., and Carino, N. J. (1986). “Impact-echo: A method for flaw detection on concrete using transient stress waves.” NBSIR 86-3452, (NTIS PB #87-104444/AS), National Bureau of Standards, Gaithersburg, Md.
11.
Sansalone, M., and Carino, N. J. (1988). “Impact-echo method—Detecting honeycombing, the depth of surface-opening, cracks, and ungrouted ducts.” Concrete Int.: Des. and Constr., 109(4), 38–46.
12.
Sansalone, M. J. ( 1986). “Flaw detection in concrete using transient stress waves,” PhD thesis, Cornell University, Ithaca, N.Y.
13.
Thomson, W. T. (1988). Theory of vibration with applications, 3rd Ed., Unwin Hyman, London.
14.
Woodward, R. J., and Williams, F. W. (1988). “Collapse of Ynys-y-Gwas Bridge, West Glamorgan.” Proc., Instn. Civ. Engrs., London, Part I, 84, 635–69.
15.
Woodward, R. J., and Wilson, D. L. S. (1991). “Deformation of segmental posttensioned precast bridges as a result of corrosion of the tendons.” Proc., Instn. Civ. Engrs., London, Part I, 90, 397–419.
Information & Authors
Information
Published In
History
Received: Feb 2, 1999
Published online: Feb 1, 2000
Published in print: Feb 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.