Seismic Rehabilitation Design of Steel Moment Connection with Welded Haunch
Publication: Journal of Structural Engineering
Volume 126, Issue 1
Abstract
This paper describes a design procedure for the seismic rehabilitation of pre-Northridge steel moment connections using a welded haunch. Experimental results from cyclic testing of full-scale specimens demonstrated that welding a triangular haunch beneath the beam's bottom flange significantly improved the seismic performance of steel moment connections. The welded haunch drastically changed the beam shear force transfer mechanism, which assisted in reducing the demands at the beam flange groove welds. Analytical studies further showed that the tensile stress in the existing beam flange groove weld can be reduced to a reasonable level if the flange of the haunch is designed to provide sufficient stiffness and strength. However, traditional beam theory cannot provide a reliable prediction of the beam's flexural stress distribution near the column face. A simplified model that allows the designer to predict the stress level in the beam flange groove welds is presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS user's manual, vols. I and II. (1995). Version 5.6, Hibbitt, Karlsson & Sorenson, Inc., Providence, R.I.
2.
Civjan, S. A., and Engelhardt, M. D. (1998). “Experimental investigation of methods to retrofit connections in existing seismic-resistant steel moment frames.” Summary Final Rep. to the National Institute of Standards and Technology, Phil M. Ferguson Struct. Engrg. Lab., University of Texas at Austin, Austin, Tex.
3.
El-Tawil, S., Mikesell, T., Vidarsson, E., and Kunnath, S. K. (1998). “Strength and ductility of FR welded-bolted connections.” Rep. No. SAC/BD-98/01, SAC Joint Venture, Sacramento, Calif.
4.
Galambos, T. V., and Ravindra, M. K. (1978). “Properties of steel for use in LRFD.”J. Struct. Div., ASCE, 104(9), 1459–1468.
5.
Goel, S. C., Stojadinovic, B., and Lee, K.-H. (1997). “Truss analogy for steel moment connections.” Engrg. J., 34(2), 43–53.
6.
Gross, J. L., Engelhardt, M. D., Uang, C.-M., Kasai, K., and Iwankiw, N. ( 1999). “Modification of existing welded moment frame connections for seismic resistance.” Steel Design Guide Series 12, AISC, Chicago.
7.
“Interim guidelines: Evaluation, repair, modification and design of welded steel moment frame structures.” (1995). FEMA267, SAC Joint Venture, Sacramento, Calif.
8.
Lee, C. H., and Uang, C.-M. (1997). “Analytical modeling of dual panel zone in haunch repaired steel MRFs.”J. Struct. Engrg. ASCE, 123(1), 20–29.
9.
Load and Resistance Factor Design (LRFD) Specification. (1993). 2nd Ed., AISC, Chicago.
10.
Popov, E. P., and Stephen, R. M. ( 1972). “Cyclic loading of full-size steel connections.” Bull. No. 21, American Iron and Steel Institute, Washington, D.C.
11.
Ramm, E. ( 1981). “Strategies for tracing the nonlinear response near limit points.” Nonlinear finite element analysis in structural mechanics, E. Wunderlich, E. Stein, and K. J. Bathe, eds., Springer, Berlin.
12.
SAC. (1996). “Technical report: Experimental investigations of beam-column subassemblies.” Rep. No. SAC-96-01, SAC Joint Venture, Sacramento, Calif.
13.
Seismic provisions for structural steel buildings. (1997). 2nd Ed., AISC, Chicago.
14.
Uang, C.-M., Yu, Q.-S., Noel, S., and Gross, J. (2000). “Cyclic testing of steel moment connections rehabilitated with RBS or welded haunch.”J. Struct. Engrg., ASCE, 126(1), 57–68.
15.
Uniform building code. (1985). International Conference of Building Officials, Whittier, Calif.
16.
Youssef, N., Bonowitz, D., and Gross, J. (1995). “A survey of steel moment-resisting frame buildings affected by the 1994 Northridge earthquake.” Rep. No. NISTIR 5625, NIST, Gaithersburg, Md.
17.
Yu, Q.-S., Noel, S., and Uang, C.-M. (1997). “Experimental and analytical studies on seismic rehabilitation of pre-Northridge steel moment connections: RBS and haunch approaches.” Rep. No. SSRP-97/08, Div. of Struct. Engrg., University of California at San Diego, La Jolla, Calif.
Information & Authors
Information
Published In
History
Received: Mar 2, 1999
Published online: Jan 1, 2000
Published in print: Jan 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.