Bolted Steel Connections: Tests on T-Stub Components
Publication: Journal of Structural Engineering
Volume 126, Issue 1
Abstract
The results of tests on 48 T-stub specimens are presented and discussed. These tests were carried out as part of a SAC Phase II project in order to provide insight into the behavior, failure modes, and ductility of these components. The main variables tested include the size of the T-stub, the gauges of the bolts, and the type and diameter of the bolts. The primary intent was to develop a large database to calibrate simplified models suitable for design. In order to develop these models, a comprehensive instrumentation system that could identify the different components of deformation in the individual T-stubs was utilized. Most of the T-stubs failed by net section fracture through the stem and by tension fracture of the bolts, but generally the failure was after significant plastification had occurred. Other failure modes observed included bolt shear and block shear. The results indicate that current design equations provide conservative estimates of the ultimate strength of the T-stubs but that they are not necessarily good predictors of the governing failure modes.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Agerskov, H. (1976). “High strength bolted connections subject to prying.”J. Struct. Div., ASCE, 102(1), 161–175.
2.
Agerskov, H. (1977). “Analysis of bolted connections subject to prying.”J. Struct. Div., ASCE, 103(11), 2145–2163.
3.
Batho, C., and Rowan, H. C. (1934). “Investigations on beam and stanchion connections.” 2nd Rep. of the Steel Struct. Res. Committee, Dept. of Scientific and Industrial Research, His Majesty's Stationery Office, London, 61–137.
4.
Bursi, O. S., Ballerini, M., Nemati, N., and Zandonini, R. ( 1997). “Quasi-static and low-cycle behavior of steel isolated tee stub connections.” Behavior of Steel Structures in Seismic Areas, F. M. Mazzolani and H. Akiyama, eds., Edizioni 10/17, Salerno, Italy.
5.
Douty, R. T., and McGuire, W. (1965). “High strength bolted moment connections.”J. Struct. Div., ASCE, 91(2), 101–128.
6.
Eurocode 3. ( 1992). “Design of steel structures, Part 1.1: General rules and rules for buildings,” ENV 1993-1-1:1992, Comite Europeen de Normalisation (CEN), Brussels, Belgium.
7.
Kulak, G. L., Fisher, J. W., and Struik, J. H. A. (1987). Guide to design criteria for bolted and riveted joints, 2nd Ed., Wiley, New York.
8.
Leon, R. T. (1997). “Seismic performance of bolted and riveted connections.” Background reports on metallurgy, fracture mechanics, welding, moment connections and frame system behavior, FEMA 288 (SAC Rep. 95-09), SAC Joint Venture, Sacramento, Calif., 5:1–5:83.
9.
Load and Resistance Factor Design, Manual of Steel Construction. (1994). 2nd Ed., American Institute of Steel Construction, Chicago.
10.
Munse, W. H. (1976). “Fifty years of riveted, bolted, and welded steel construction.”J. Constr. Div., ASCE, 102(3), 437–447.
11.
Nair, R. S., Birkemoe, P. C., and Munse, W. H. (1974). “High strength bolts subject to tension and prying.”J. Struct. Div., ASCE, 100(2), 351–372.
12.
Roeder, C. W., Leon, R. Y., and Preece, F. R. (1994). “Strength, stiffness, and ductility of older steel structures under seismic loading.” Rep. SGEM 94-4, Dept. of Civil Engineering, University of Washington, Seattle.
13.
Roeder, C. W., Knechtel, B., Thomas, E., Vaneaton, A., Leon, R. T., and Preece, F. R. (1996). “Seismic behavior of older steel structures.”J. Struct. Engrg., ASCE, 122(4), 365–373.
14.
SAC. (1997). “Protocol for fabrication, inspection, testing, and documentation of beam-column tests and other experimental specimens.” Rep. No. SAC/BD-97/02, Joint Venture, Strategic Air Command, Washington, D.C.
15.
Thornton, W. A. (1985). “Prying action—a general treatment.” Engrg. J., 22, 67–75.
Information & Authors
Information
Published In
History
Received: Apr 5, 1999
Published online: Jan 1, 2000
Published in print: Jan 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.