Effects of Connection Fractures on SMRF Seismic Drift Demands
Publication: Journal of Structural Engineering
Volume 126, Issue 1
Abstract
A central portion of an extensive investigation into the effects of beam-column connection fractures on seismic interstory drift demands for steel moment-resisting frame (SMRF) structures is summarized. Nonlinear dynamic analyses are carried out for six SAC Phase II buildings modeled with brittle connections and subjected to the SAC ground motions at two probability levels. Story drift demand statistics for the model structures with brittle connections are compared with those for the model structures with ductile connections. An empirical analysis model for connection fracture is employed, with values for the parameters of the model calibrated by field and laboratory data. The sensitivities of story drift demands to variations in the fracture parameters are explored. In particular, the case when only bottom beam-flange-connections fracture is contrasted with the case of both top- and bottom-flange fractures. Whereas the effects of single-flange (e.g., bottom-flange) fractures alone on story drift demands are perhaps less than anticipated, the additional effects of second-flange (e.g., top-flange) fractures can be substantial. In either case, the effects of connection fractures are more pronounced at higher drift demand levels.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anderson, J. C., Johnston, R. G., and Partridge, J. E. (1996). “Testing of damaged steel moment resisting connections.” Proc., 11th World Conf. on Earthquake Engrg., Acapulco, Mexico.
2.
Cornell, C. A., and Luco, N. (1999). “The effects of connection fractures on steel moment resisting frame seismic demands and safety: A report on SAC Phase II Task 5.,4.6.” Rep. No. SAC-BD/99-03, SAC Joint Venture, Sacramento, Calif.
3.
Foutch, D. A., and Shi, S. ( 1996). “Connection element (type 10) for DRAIN-2DX.” Dept. of Civ. Engrg., University of Illinois at Urbana-Champaign, Ill.
4.
Goel, S. C., Stojadinovic, B., et al. (1999). “Conduct parametric tests on unreinforced connections.” Draft of SAC Joint Venture Subtask 7.02 Test Results Rep., Dept. of Civ. and Envir. Engrg., University of Michigan, Ann Arbor, Mich.
5.
Gupta, A., and Krawinkler, H. (1999a). “Behavior of ductile SMRFs at various seismic hazard levels.”J. Struct. Engrg., ASCE, 126(1), 98–107.
6.
Gupta, A., and Krawinkler, H. (1999b). “Seismic demands for performance evaluation of steel moment resisting frame structures.” John A. Blume Earthquake Engrg. Ctr. Rep. No. 132, Dept. of Civ. and Envir. Engrg., Stanford University, Stanford, Calif.
7.
Luco, N., and Cornell, C. A. (1997). “Numerical example of the proposed SAC procedure for assessing the annual exceedance probabilities of specified drift demands and of drift capacity.” Internal SAC Rep., SAC.
8.
“NEHRP guidelines for the seismic rehabilitation of buildings.” (1997). FEMA 273, Federal Emergency Management Agency, Washington, D.C.
9.
Prakash, V., Powell, G. H., and Campbell, S. (1993). “DRAIN-2DX base program description and user guide, version 1.10.” Rep. No. UCB/SEMM-93/17, Dept. of Civ. Engrg., University of California at Berkeley, Calif.
10.
SAC. (1997). “Connection test summaries.” SAC Tech. Rep. 96-02.
11.
Shome, N., and Cornell, C. A. (1999). “Probabilistic seismic demand analysis of nonlinear structures.” Reliability of Marine Struct. Program Rep. No. RMS-35, Dept. of Civ. Engrg., Stanford University, Stanford, Calif.
12.
Somerville, P., Smith, N., Punyamurthula, S., and Sun, J. (1997). “Development of ground motion time histories for phase II of the FEMA/SAC steel project.” SAC Background Document, Rep. No. SAC/BD-97/04.
13.
Song, J., and Ellingwood, B. ( 1998). “Seismic reliability evaluation of steel frames with damaged welded connections,” PhD dissertation, Dept. of Civ. Engrg., Johns Hopkins University, Baltimore, MD.
Information & Authors
Information
Published In
History
Received: Apr 5, 1999
Published online: Jan 1, 2000
Published in print: Jan 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.