Behavior of Steel Box Girders with Top Flange Bracing
Publication: Journal of Structural Engineering
Volume 125, Issue 8
Abstract
A critical design stage for steel girders occurs during casting of the concrete bridge deck, when the noncomposite steel section must support the wet concrete and the entire construction load. Although a composite box girder has a high torsional stiffness in the completed bridge, during construction the open section is relatively flexible in torsion. A horizontal truss system is usually installed at the top flange level to increase the torsional stiffness and form a quasi-closed section. This paper presents results from a finite-element study on the bending behavior of trapezoidal box girder systems during construction. The results show that large forces can develop in the horizontal truss system due to vertical bending of the box girder. For truss systems with a single diagonal, the forces induced from bending result in large lateral bending stresses in the top flanges of the box. Many current design methods and computer programs do not consider the truss forces and top flange lateral bending stresses induced from bending. Expressions to estimate the bending forces in the lateral truss system as well as the lateral bending stresses in the top flange are developed. A numerical example illustrates the use of the expressions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ANSYS users manual: Version 5.3. (1996). ANSYS, Houston, Pa.
2.
“Chapter 13: Four LRFD design examples of steel highway bridges.” (1997). Highway structures design handbook: Volume II. American Iron and Steel Institute and National Steel Bridge Alliance, Chicago.
3.
Fan, Z. ( 1999). “Field and computational studies of steel trapezoidal box girder bridges,” PhD dissertation, College of Engrg., University of Houston, Tex.
4.
Guide specifications of horizontally curved highway bridges. (1993). American Association of State Highway and Transportation Officials, Washington, D.C.
5.
Heins, C. P. Jr. (1975). Bending and torsional design in structural members. Lexington Books, Lexington, Mass.
6.
Highway structural design handbook: Volume 2. (1982). AISC Marketing, Pittsburgh.
7.
Kollbrunner, C. F., and Basler, K. (1969). Torsion in structures—An engineering approach. Springer, New York.
8.
Tung, D. H. H., and Fountain, R. S. (1970). “Approximate torsional analysis of curved box girders by the M/R method.” AISC Engrg. J., 7(3), 65–74.
Information & Authors
Information
Published In
History
Received: Dec 22, 1998
Published online: Aug 1, 1999
Published in print: Aug 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.