Prediction of Ultimate Capacity of Perforated Lipped Channels
Publication: Journal of Structural Engineering
Volume 125, Issue 5
Abstract
Local buckling behavior of symmetrically perforated lipped channels is investigated experimentally and analytically. A total of 63 stub column tests have been carried out to investigate the effects of the size, position, and aspect ratio of rectangular holes on the ultimate compressive strength of perforated columns. A formulation is proposed to predict the ultimate load-carrying capacity of such channels. In the proposed approach the web plate with two rectangular holes is idealized as two unstiffened elements and a central column. The effective width of an unstiffened element is estimated by the Cold-Formed Steel Design Manual, published by the American Iron and Steel Institute in 1996. The Perry-Robertson approach is modified to predict the strength of the central column. The proposed formulation is shown to predict the ultimate strength of perforated columns accurately. The size and positions of holes are the most influential factors determining the weakening effect. The aspect ratio of the rectangular holes has only marginal effects for lipped columns.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cold-formed steel design manual . (1996). American Iron and Steel Institute, Washington, D.C.
2.
“Eurocode 3: Design of steel structures. Part 1.3: General rules, supplementary rules for cold formed thin gauge members and sheeting.” (1996). ENV 1993-1-3, European Committee for Standardisation, Brussels.
3.
Leach, P., Taylor, A., and Davies, J. M. ( 1996). “The behavior of light gauge steel perforated sections subject to combined axial loading plus bending.” Proc., Bicentenary Conf. on Thin-Walled Struct.
4.
Loov, R. ( 1984). “Local buckling capacity of C-shaped cold-formed steel sections with punched webs.” Can. J. Civ. Engrg., Ottawa, 11(1), 1–7.
5.
Miller, T. H., and Pekoz, T. (1994). “Unstiffened strip approach for perforated wall studs.”J. Struct. Engrg., ASCE, 120(2), 410–421.
6.
Narayanan, R., and Chow, F. Y. ( 1984). “Ultimate capacity of uniaxially compressed perforated plates.” Thin-walled structures, Vol. 2, Elsevier Applied Science, London, 241–264.
7.
Pu, Y., Godley, M. H. R., and Beale, R. G. ( 1998a). “Effect of experimental procedures on failure load.” Proc., 14th Int. Spec. Conf. on Cold-Formed Steel Struct., 311–322.
8.
Pu, Y., Godley, M. H. R., Beale, R. G., and Wallace, J. ( 1998b). “Study on the effect of symmetrical openings on the ultimate capacity of lipped channels.” Proc., 2nd Int. Conf. on Thin-Walled Struct., 571–577.
9.
“Recommendations for the design of steel static pallet racking and shelving.” (1994). Section X, Federation Europeenne De La Manutention.
10.
Rhodes, J., and Schneider, F. D. ( 1994). “The compressional behaviour of perforated elements.” Proc., 12th Int. Spec. Conf. on Cold-Formed Steel Struct., 11–28.
11.
Rhodes, J., and Macdonald, M. ( 1996). “The effect of perforation length on the behaviour of perforated elements in compression.” Proc., 13th Int. Spec. Conf. on Cold-Formed Steel Struct.
12.
Ritchie, D., and Rhodes, J. ( 1975). “Buckling and post-buckling behaviour of plates with holes.” Aeronautical Quarterly, London, 26, 281– 296.
13.
Shanmugam, N. E. ( 1996). “Openings in thin-walled steel structures.” Proc., Bicentenary Conf. on Thin-Walled Struct.
14.
Sivakumaran, K. S. ( 1987). “Load capacity of uniformly compressed cold-formed steel section with punched web.” Can. J. Civ. Engrg., Ottawa, 14(4), 550–558.
15.
Yu, W. W., and Davis, C. S. (1973). “Cold-formed steel members with perforated elements.”J. Struct. Div., ASCE, 99(10), 2061–2077.
Information & Authors
Information
Published In
History
Received: May 4, 1998
Published online: May 1, 1999
Published in print: May 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.