Prefabricated Composite Jacketing of RC Columns for Enhanced Shear Strength
Publication: Journal of Structural Engineering
Volume 125, Issue 3
Abstract
The effectiveness of prefabricated composite jacketing to retrofit existing circular reinforced concrete (RC) bridge columns for enhanced seismic shear strength is described in this paper. The jackets consist of multilayer prefabricated glass fiber reinforced composite shells adhered together. Three half-scale circular columns were tested under cyclic shear in double curvature and constant axial load. One column was tested in the “as built” condition to investigate the shear failure mode of columns designed based on pre-1971 codes. Two other columns were tested after being retrofitted using prefabricated composite jackets. The as built column suffered shear failure at low displacement ductility. The retrofitted columns developed significantly improved hysteretic responses with stable hysteresis loops even at displacement ductility levels as high as 10.0 corresponding to drift ratios exceeding 5.2%. Method for retrofit design using prefabricated composite jacketing is also provided and validated by the test results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Caltrans. ( 1997). “Pre-qualification requirements for alternative column casings for seismic retrofit (composites).” California Department of Transportation, Sacramento, Calif.
2.
EERI. ( 1995a). “Northridge earthquake reconnaissance report, Vol. 1.” Earthquake Spectra, Rep. No. 95-03, J. Hall, ed., Earthquake Engineering Research Institute, Oakland, Calif.
3.
EERI. ( 1995b). “Preliminary reconnaissance report on the Hyogo-Ken Nanbu earthquake of January 17, 1995.” Rep. No. 95-04, Earthquake Engineering Research Institute, Oakland, Calif.
4.
King, D. J., Priestley, M. J. N., and Park, R. ( 1986). “Computer program for concrete column design.” Res. Rep. No. 86/12, Dept. of Civ. Engrg., University of Canterbury.
5.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.”J. Struct. Engrg., ASCE, 114(8), 1827–1849.
6.
Matsuda, T., Sato, H., Fujiwara, H., and Higashira, N. ( 1990). “Effect of carbon fiber reinforcement as a strengthening measure for reinforced concrete bridge piers.” Proc., 1st U.S.-Japan Workshop on Seismic Retrofit of Bridges, Public Works Research Institute, Ministry of Construction, Tsukuba Science City, Japan.
7.
Priestley, M. J. N. ( 1987). “Damage of the I-5/I605 separator in the Whittier earthquake of October 1987.” Earthquake Spectra, Vol. 4, No. 2, pp. 389–405.
8.
Priestley, M. J. N., Ranzo, G., Benzoni, G., and Kowalsky, M. J. ( 1996). “Yield displacement of circular bridge columns.” Proc., 4th Caltrans Seismic Res. Workshop, California Department of Transportation, Sacramento, Calif.
9.
Priestley, M. J. N., and Seible, F. ( 1991). “Seismic assessment and retrofit of bridges.” Structural systems research project, Rep. No. SSRP-91/03, M. J. N. Priestley and F. Seible, University of California, San Diego, Calif.
10.
Priestley, M. J. N., Seible, F., Xiao, Y., and Verma, R. ( 1994a). “Steel jacket retrofit of short RC bridge columns for enhanced shear strength—Part 1—Theoretical considerations and test design.” ACI Struct. J., 91(4), 394–405.
11.
Priestley, M. J. N., Seible, F., Xiao, Y., and Verma, R. ( 1994b). “Steel jacket retrofit of short RC bridge columns for enhanced shear strength—Part 2—Experimental results.” ACI Struct. J., 91(5), 537–551.
12.
Priestley, M. J. N., Verma, R., and Xiao, Y. (1994c). “Seismic shear strength of reinforced concrete columns.”J. Struct. Engrg., ASCE, 120(8), 2310–2329.
13.
Saadatmanesh, H., Ehsani, M. R., and Li, M. W. ( 1994). “Strength and ductility of concrete columns externally reinforced with fiber composite straps.” ACI Struct. J., 91(4), 434–444.
14.
Seible, F., Hegemier, G. A., and Innamorato, D. ( 1995). “Developments in bridge column jacketing using advance composites.” Proc., Nat. Seismic Conf. on Bridges and Hwy., Federal Highway Administration and California Department of Transportation, San Diego, Calif.
15.
Xiao, Y., and Ma, R. (1997). “Seismic retrofit of RC circular columns using prefabricated composite jacketing.”J. Struct. Engrg., ASCE, 123(10), 1357–1364.
16.
Xiao, Y., Martin, G. R., Yin, Z., and Ma, R. ( 1996). “Seismic retrofit of existing reinforced concrete bridge columns using a prefabricated composite jacketing system.” Proc., 1st Int. Conf. on Composite in Infrastruct., University of Arizona at Tucson, Tucson, Arizona, 903–916.
17.
Xiao, Y., and Martirossyan, A. (1998). “Seismic performance of high-strength concrete columns.”J. Struct. Engrg., ASCE, 124(3), 241–251.
18.
Xiao, Y., Priestley, M. J. N., and Seible, F. ( 1993). “Steel jacket retrofit for enhancing shear strength of short rectangular reinforced concrete bridge columns.” Structural systems research project, Rep. No. SSRP-92/07, Dept. of Appl. Mech. and Engrg. Sci., 192.
Information & Authors
Information
Published In
History
Received: Nov 23, 1997
Published online: Mar 1, 1999
Published in print: Mar 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.