Simplified Analysis Method for Slab-on-Girder Highway Bridge Decks
Publication: Journal of Structural Engineering
Volume 125, Issue 1
Abstract
It has been observed from test and analysis results that the differential deflection between girders in a slab-on-girder bridge deck reduces the negative bending moments in the deck slab. A simplified analysis method considering the effect of girder deflection is developed, based on an analytical solution obtained with the elastic plate theory. With this approach, the effects of the girder stiffness and spacing, and the span length of the bridge on the maximum negative bending moments in a deck slab can be assessed. The simplified analysis method is validated with finite-element models. It has been shown that the maximum negative bending moment in a bridge deck can be accurately evaluated with the proposed method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, J. H. ( 1991). “Cracking, serviceability and strength of concrete bridge decks.” Transp. Res. Rec. 1290, Transportation Research Board, National Research Council, Washington, D.C., 152–171.
2.
Bakht, B., and Jaeger, L. G. ( 1985). Bridge analysis simplified . McGraw-Hill, New York.
3.
Batchelor, B., et al. ( 1978). “Investigation of the ultimate strength of deck slabs of composite steel/concrete bridges.” Transp. Res. Rec. 664, Transportation Research Board, National Research Council, Washington, D.C., 162–170.
4.
Beal, D. B. (1982). “Load capacity of concrete bridge decks.”J. Struct. Div., ASCE, 108(4), 814–832.
5.
“Building code requirements for reinforced concrete.” (1989). ACI 318-89, American Concrete Institute, Detroit.
6.
Cao, L. ( 1996). “Analysis and design of slab-on-girder highway bridge decks,” PhD thesis, Dept. of Civ., Envir., and Arch. Engrg., University of Colorado, Boulder, Colo.
7.
Cao, L., Allen, J. H., Shing, P. B., and Woodham, D. (1996). “Behavior of RC bridge decks on flexible girders.”J. Struct. Engrg., ASCE, 122(1), 11–19,.
8.
Csagoly, P. F., Holowka, M., and Dorton, R. ( 1978). “The true behavior of thin concrete bridge slabs.” Transp. Res. Rec. 66, Transportation Research Board, National Research Council, Washington, D.C., 171–179.
9.
Cusens, A. R., and Pama, R. P. ( 1975). Bridge deck analysis . Wiley, New York.
10.
Fang, I. K., et al. (1990). “Behavior of isotropic R/C bridge decks on steel girders.”J. Struct. Engrg., ASCE, 116(5), 659–678.
11.
Newmark, N. M. ( 1949). “Design of I-beam bridges.” ASCE Trans., ASCE, 114, 997–1022.
12.
Rowe, R. E. ( 1962). Concrete bridge design . Wiley, New York.
13.
Standard specifications for highway bridges. (1992). 15th Ed., American Association of State Highway and Transportation Officials, Washington, D.C.
14.
Westergaard, H. M. ( 1930). “Computations of stresses in bridge slabs due to wheel loads.” Public Roads, March, 1–23.
15.
Wilson, E. L., et al. ( 1989). SAP90 program user's manual . Computers & Structures, Inc., Berkeley, Calif.
Information & Authors
Information
Published In
History
Received: Jul 2, 1997
Published online: Jan 1, 1999
Published in print: Jan 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.