Continuum Topology Optimization for Concept Design of Frame Bracing Systems
Publication: Journal of Structural Engineering
Volume 124, Issue 5
Abstract
Discrete ground structure topology optimization design methods have to date received considerable attention in structural engineering. An alternative class of structural topology optimization methods, which have not yet received much attention in structural engineering, but which have undergone considerable development in the past decade, are the so-called continuum formulations. In this work, a continuum structural topology optimization formulation is presented and applied to the concept design optimization of structural bracing systems that are needed to stiffen tall structures against sidesway under lateral-wind and seismic-type loading. Although demonstrated here in the context of these specific design examples, continuum structural topology optimization methods are believed to hold potential as a design tool for a wide range of civil engineering type structures. A variety of continuum topology design formulations, including static compliance minimization and eigenvalue optimization, are explored, and solution parameters are varied to show that a number of design possibilities can be realized as solutions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allaire, G., and Kohn, R. V. (1993). “Topology optimal design and optimal shape design using homogenization.”Topology design of structures, M. P. Bendsoe and C. A. Mota Soares, Eds., Kluwer, Dordrecht, The Netherlands, 207–218.
2.
Ambrose, J., and Vergun, D. (1987). Design for lateral forces. John Wiley and Sons, Inc., New York, N.Y.
3.
Bendsoe, M. P.(1989). “Optimal shape design as a material distribution problem.”Struct. Optimization, 1, 193–202.
4.
Bendsoe, M. P., Diaz, A. P., and Kikuchi, N. (1993). “Topology and generalized layout optimization of elastic structures.”Topology design of structures, M. P. Bendsoe and C. A. Mota Soares, Eds., Kluwer, Dordrecht, The Netherlands, 159–205.
5.
Bendsoe, M. P., and Kikuchi, N.(1988). “Generating optimal topology in structural design using a homogenization method.”Comp. Methods in Appl. Mech. and Engrg., 71, 197–224.
6.
Ben-Tal, A., and Nemirovski, A. (1993). “An interior point algorithm for truss topology design.”Topology design of structures, M. P. Bendsoe and C. A. Mota Soares, Eds., Kluwer, Dordrecht, The Netherlands, 55–69.
7.
Haber, R. B., Jog, C. S., and Bendsoe, M. P.(1996). “A new approach to variable-topology shape design using a constraint on perimeter.”Struct. Optimization, 11, 1–12.
8.
Huang, M.-W. (1995). “Algorithms for mixed continuous-discrete variable problems in structural optimization,” PhD dissertation, University of Iowa, Iowa City, Iowa.
9.
Hurty, W. C., and Rubinstein, M. F. (1965). Dynamics of structures. Prentice-Hall, Inc., Englewood Cliffs, N.J.
10.
Jog, C. S., Haber, R. B., and Bendsoe, M. P.(1994). “Topology design with optimized, self adaptive materials.”Int. J. Numer. Methods in Engrg., 37, 1323–1350.
11.
Kosaka, I. (1997). “A conceptual design method for structures and structural materials,” PhD dissertation, University of Iowa, College of Engineering, Iowa City, Iowa.
12.
Ma, Z.-D., Kikuchi, N., Cheng, H.-C., and Hagiwara, I.(1995). “Topological optimization techniques for free-vibration problems.”J. Appl. Mech., 62, 200–207.
13.
Michell, A. C. H.(1904). “The limit of economy of material in frame-structures.”Philosophical Mag. Ser. 6, 8, 589–597.
14.
Mijar, A. R. (1997). “Topology design of structures using SLP,” MS thesis, University of Iowa, College of Engineering, Iowa City, Iowa.
15.
Ohaski, M.(1995). “Genetic algorithm for topology optimization of trusses.”Comp. and Struct., 57(2), 219–225.
16.
Prager, W.(1974). “A note on discretized michell structures.”Comp. Methods Appl. Mech. and Engrg., 3, 349–355.
17.
Reuss, A. (1929). “Berücksichtigung der elastischen Formänderung in der Plastizitättheorie.”Z. Angew. Math. Mech., 9, 266–274 (in German).
18.
Sigmund, O. (1994). “Design of material structures using topology optimization.”Report S69, Danish Center for Applied Mathematics and Mechanics, Technical University of Denmark, Lyngby, Denmark.
19.
Suzuki, K., and Kikuchi, N.(1991). “A homogenization method for shape and topology optimization.”Comp. Methods in Appl. Mech. and Engrg., 93, 291–318.
20.
Swan, C. C., and Kosaka, I.(1997a). “Voigt-Reuss topology optimization for structures with linear elastic material behaviors.”Int. J. Numer. Methods in Engrg., 40, 3033–3057.
21.
Swan, C. C., and Kosaka, I.(1997b). “Voigt-Reuss topology optimization for structures with inelastic material behaviors.”Int. J. Numer. Methods in Engrg., 40, 3785–3814.
22.
Swan, C. C., Kosaka, I., and Arora, J. S. (1996). BESTOP user's manual. Computational Solid Mechanics Laboratory, University of Iowa, Iowa City, Iowa.
23.
Taranath, B. S. (1988). Structural analysis and design of tall buildings. McGraw-Hill Inc., New York, N.Y.
24.
Voigt, W. (1889). Weid Ann., 38.
25.
Yang, R. J., and Chuang, C. H.(1994). “Optimal topology design using linear programming.”Comp. and Struct., 52(2), 265–275.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: May 1, 1998
Published in print: May 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.