Reliability Assessment of Pile-Supported Structural Systems
Publication: Journal of Structural Engineering
Volume 124, Issue 1
Abstract
A performance-mode (PM)-based evaluation procedure is proposed to determine the probability of unsatisfactory performance (UP) for two-dimensional (2-D) and three-dimensional (3-D) systems involving pile-supported dams. This methodology includes ductile behavior of individual piles for the strength mode. It also examines the 3-D effects on the bounds for the series-parallel system. The procedure is an extension of the reliability method presented to compute the system probability of UP of pile-supported structures using brittle-element behavior. Lateral and vertical deflections are the limit states of the pile cap that provide the system-level probability of UP for the serviceability limit state. The element-level probability of UP for strength and system-level probability of UP serviceability are combined to evaluate the bounds for the load-case specific system probability of UP. Finally, the overall system probability of UP is evaluated considering the contributions of all load cases combined. The procedure is illustrated with examples, and the bounds for the system probability of UP are evaluated. The results indicate that the bounds of probability of UP for the example are narrower for ductile behavior than for brittle behavior. A 3-D problem correctly recognizes a number of significant PM that are absent in the 2-D approximation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“A future directions for design and construction innovations in navigation structures.” (1996). EP 1110-1-20, Dept. of the Army, United States Army Corps of Engineers (USACE), Washington, D.C.
2.
Banon, H.(1994). “Assessing fitness for purpose of offshore platforms. II: Risk management, maintenance, and repair.”J. Struct. Engrg., ASCE, 120(12), 3613–3633.
3.
Banon, H., Bea, R. G., Bruen, F. J., Cornell, C. A., Krieger, W. F., and Stewart, D. A.(1994). “Assessing fitness for purpose of offshore platforms. I: Analytical methods and inspections.”J. Struct. Engrg., ASCE, 120(12), 3595–3612.
4.
“Basic pile group behavior.” (1983). Tech. Rep. K-83-1, U.S. Army Engr. Waterways Experiment Station (USAE-WES), Vicksburg, Miss.
5.
Benett, R. M., and Ang, A. H-S. (1983). “Investigation of method for structural system reliability.”Struct. Res. Ser. No. 510, Univ. of Illinois, Urbana, Ill.
6.
Bulleit, W. M., Rosowsky, D. V., Fridley, K. J., and Criswell, M. E.(1993). “Reliability of wood structural systems.”J. Struct. Engrg., ASCE, 119(9), 2629–2641.
7.
Dawkins, W. P. (1982). “User's Guide: Computer Program for Analysis of Beam-Column Structures with Nonlinear Supports (CBEAMC),”Instruction Rep. No. K-82-6, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
8.
El-Shahhat, A. M., Rosowsky, D. V., and Chen, W.(1993). “Construction safety of multistory concrete buildings.”Struct. J., ACI, 90(4), 335–341.
9.
Enevoldsen, I., and Sorensen, J. D.(1993). “Reliability-based optimization of series systems of parallem systems.”J. Struct. Engrg., ASCE, 119(4), 1069–1084.
10.
“Engineering and design: reliability assessment of navigation structures.” (1992). ETL 1110-2-532, Dept. of the Army, U.S. Army Corps of Engineers (USACE), Washington, D.C.
11.
Feng, Y. S.(1988). “Enumerating significant failure modes of a structural system by using criterion methods.”Comp. and Struct., 30(5), 1153–1157.
12.
Haldar, A., and Mahadevan, S. (1993). “Chapter 3—first-order/second-order reliability methods (FORM/SORM).”Probabilistic structural mechanics handbook. C. Sundararajan, ed., Van Nostrand, Reinhold, New York, N.Y.
13.
Karamchandani, A. (1990). “Limitations of some of the approximate structural analysis methods that are used in structural system reliability.”Struct. Perf., 7(2–4), 115–127.
14.
Li, C. Q.(1993). “Time-dependent structural serviceability analysis of concrete structures.”Struct. J., ACI, 90(2), 204–209.
15.
Mlakar, P. F., and Stough, W. R., Jr. (1992). “Condition analysis and evaluation of navigation structures: pile foundations.”Rep. No. J650-92-014/1767, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
16.
Moses, F.(1982). “System reliability developments in structural engineering.”Struct. Perf., 1(1), 3–13.
17.
Moses, F. (1995). “Probabilistic analysis of structural systems.”Probabilistic structural mechanics handbook, theory and industrial applications, C. Sundararajan ed., Chapman & Hall, Ltd., New York, N.Y., 166–187.
18.
Perez, J. Y., and Holloway, D. M. (1979). “Results and interpretation of pile driving effects test program.” U.S. Army Engineer District St. Louis, St. Louis, Mo.
19.
“Probabilistic connection: an SAE NEWSLETTER for Probabilistic Method.” (1996). G-11 committee, 3, Society of Automotive Engineers (SAE), Warrendale, Pa.
20.
Rashedi, M. R., and Moses, F.(1988). “Identification of failure modes in system reliability.”J. Struct. Engrg., ASCE, 114(2), 292–313.
21.
Sommer, A. M., Nowak, A. S., and Thoft-Christensen, P.(1993). “Probability-based bridge inspection strategy.”J. Struct. Engrg., ASCE, 119(12), 3520–3536.
22.
Thoft-Christensen, P., and Baker, M. J. (1982). Structural reliability and its applications. Springer-Verlag, KG, Berlin, Germany.
23.
“User's guide: pile group analysis (CPGA) computer program.” (1989). Tech. Rep. ITL-89-3, U.S. Army Engrs. Waterways Experiment Station (USAE-WES), Vicksburg, Miss.
24.
Wang, D., Chowdhury, M. R., and Haldar, A.(1997). “System reliability evaluation considering strength and serviceability requirements.”Comp. and Struct., 62(5), 883–896.
25.
Zhang, Y. C.(1993). “Rigidity reliability analysis of structural systems.”Comp. and Struct., 45(3), 505–510.
26.
Zimmerman, J. J., Ellis, J. H., and Corotis, R. B.(1993). “Stochastic optimization models for structural-reliability analysis.”J. Struct. Engrg., ASCE, 119(1), 223–239.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Jan 1, 1998
Published in print: Jan 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.