Bending Behavior of Concrete Beams Wrapped with Carbon Fabric
Publication: Journal of Structural Engineering
Volume 124, Issue 1
Abstract
Reinforced concrete structures deteriorate over time due to environmental aging, fatigue, and other reasons. Strengthening and rehabilitating those concrete structures by wrapping them with carbon fabric is one of several economical engineering solutions. The intent of this study is to evaluate the increase in flexural strength of reinforced concrete beams after wrapping them with carbon fabrics. In this study, 24 reinforced concrete beams strengthened with carbon fiber wraps were experimentally evaluated to determine improvements in flexural strength. In addition, bending test results from the wrapped beams were compared with those of other identical concrete beams strengthened with bonded steel plates. Four different carbon wrap configurations were used for strengthening beams and for evaluation and comparison of experimental data. Static responses of all the concrete beams were evaluated in terms of strength, stiffness, compositeness between wrap and concrete, and associated failure modes. Factors governing the percentage increase in the ultimate strength are discussed. Wrapped beams were analyzed considering conventional force equilibrium equations and compared with the experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baluch, M. H., Ziraba, Y. N., Azad, A. K., Sharif, A., Al-Sulamani, G. J., and Basunbul, I. A. (1995). “Shear strength of plated RFC beams.”Mag. Concrete Res., 47(173), 369–374. Building code requirements for reinforced concrete and commentary, ACI 318R-95 . (1995). American Concrete Inst., Detroit, Mich.
2.
Chajes, M. J., Januzska, T. F., Mertz, D. R., Thomson, T. A., Jr., and Flench, and W. W., Jr.(1995). “Shear strengthening of reinforced concrete beams using externally applied composite fabrics.”ACI Struct. J., 92(3), 295–303.
3.
Faza, S. S., and GangaRao, H. V. S. (1991). “Bending response of beams reinforced with FRP bars for varying concrete strengths.”Advanced composite materials, S. L. Iyer, ed.
4.
Forca tow sheet process application guidelines. (1994). Tonen Corp., Japan.
5.
GangaRao, H. V. S., Vijay, P. V., and Dutta, P. K. (1995). “Durability of composites in infrastructure.”Corrosion-95, Paper No. 550, NACE International Annual Conference and Corrosion Show.
6.
Ichimasu, H., Maruyama, M., Watanabe, H., and Hirose, T. (1993). “RC slabs strengthened by bonded carbon FRP plates, Part 1 Laboratory Study and Part 2 Applications.”ACI SP-138, Int. Symp., Fiber Reinforced-Plastic Reinforcement for Concrete Structures, A. Nanni and C. W. Dolan, eds., 933–970. American Concrete Institute, Detroit, Mich.
7.
MacGregor, G. J. (1988). Reinforced concrete mechanics and design. Prentice-Hall, Englewood Cliffs, N.J.
8.
Mander, J. B., Priestly, M. J. N., and Park, R. (1988). “Observed stress-strain behavior of confined concrete.”J. Struct. Engrg., 114(8), 1827– 1849.
9.
Meier, U. (1992). “Carbon fiber-reinforced polymers: Modern materials in bridge engineering.”CH-8093, Struct. Engrg. Int., Zurich, Switzerland, 7–12.
10.
Meier, U., Deuring, M., Meier, H., and Schwegler, G. (1993). “Strengthening of structures with advanced composites.”Alternative materials for the reinforcement and prestressing of concrete, Clarke, J. L., ed., Chapman and Hall.
11.
Oehlers, D. J.(1992). “Reinforced concrete beams with plates glued to their soffits.”J. Struct. Engrg., 118(8), 2023–2038.
12.
Plevris Nikolaos, Triantafillou, and T. C., and Veneziano(1995). “Reliability of RC members strengthened with CFRP laminates.”J. Structural Engrg., 121(7), 1037–1044.
13.
Priestly, M. J. N., Seible, F., and Fyfe, E. (1992). “Column seismic retrofit using fiberglass/epoxy jackets.”Advanced composite materials in bridges and structures, K. W. Neale and P. Labossiere, eds., Can. Soc. Civ. Engrg., 287–298.
14.
Rodriguez, M., and Park, R.(1994). “Seismic load tests on reinforced concrete columns strengthened by jacketing.”ACI Struct. J., 91(2), 150–159.
15.
Saadatmanesh, H., and Ehsani, M. R.(1991). “RC beams strengthened with GFRP plates I: Experimental study,”J. Struct. Engrg., 117(11), 3417–3433.
16.
Vijay, P. V., and GangaRao, H. V. S. (1996). “A unified limit state approach using deformability factors in concrete beams reinforced with GFRP bars.”Proc., Mat. for the New Millennium, 4th Mat. Conf., ASCE, Washington, D.C., Vol. 1, 657–665.
17.
Ziraba, Y. N., Baluch, M. H., Basunbul, I. A., Sharif, A. M., Azad, A. K., and Al-Sulaimani, G. J.(1994). “Guidelines toward the design of reinforced concrete beams with external plates.”ACI Struct. J., 91(6), 639–646.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Jan 1, 1998
Published in print: Jan 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.