Finite-Element Solution of Variable-Arc-Length Beams under a Point Load
Publication: Journal of Structural Engineering
Volume 123, Issue 7
Abstract
In this technical note, a finite-element solution of a simply supported beam with variable arc length under a point load is presented. The beam is hinged at one end and simply supported over the other end. The distance between the two supports is the span length. A point load is applied at various locations along the span of the beam. The finite-element method based on the variational formulation, which involves the bending strain energy, work done by the point load, and the strain energy due to axial forces in beam, is used to solve the problem. Because of the unknown total arc length, the finite-element discretization is made along the span length rather than the total arc length. For a given value of the point load, two possible equilibrium configurations exist, of which one is stable and the other is unstable. For the stable configuration, the finite-element solution gives results that are in good agreement with the results obtained using the elliptic-integral method and the shooting-optimization technique.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chucheepsakul, S., Buncharoen, S., and Huang, T.(1995). “Elastica of simple variable-arc-length beam subjected to end moment.”J. Engrg. Mech., ASCE, 121(7), 767–772.
2.
Chucheepsakul, S., Buncharoen, S., and Wang, C. M.(1994). “Large deflection of beams under moment gradient.”J. Engrg. Mech., ASCE, 120(9), 1848–1860.
3.
Chucheepsakul, S., and Huang, T.(1992). “Finite element solution of large deflection analysis of a class of beams.”Comp. Methods in Engrg.: Adv. and Applications, 1, 45–50.
4.
Chucheepsakul, S., Theppitak, G., and Wang, C. M.(1996). “Large deflection of simple variable-arc-length beam subjected to a point load.”Struct. Engrg. and Mech., 4(1), 49–59.
5.
Conway, H. D.(1947). “The large deflection of a simply supported beam.”Phil. Mag., Series 7, 38, 905–911.
6.
Fried, I.(1981). “Stability and equilibrium of the straight and curved elastica-finite element computation.”Comp. Methods in Appl. Mech. Engrg., 21, 49–61.
7.
Frisch-Fay, R. (1962). Flexible bars. Butterworth's, London, England.
8.
Golley, B. W.(1984a). “Large deflections of bars bent through frictionless supports.”Int. J. Non-Linear Mech., 19(1), 1–9.
9.
Golley, B. W.(1984b). “The finite element solution of a class of elastica problems.”Comp. Methods in Appl. Mech. Engrg., 46, 159–168.
10.
Gospodnetic, D.(1959). “Deflection curve of a simply supported beam.”J. Appl. Mech., 26(4), 675–676.
11.
Harrison, H. B.(1973). “Post-buckling analysis of non-uniform elastic columns.”Int. J. Numer. Meth. Engrg., 7, 195–210.
12.
Huang, T., and Chucheepsakul, S.(1985). “Large displacement analysis of a marine riser.”J. Energy Resour. Tech., 107(1), 54–59.
13.
Huang, T., and Chucheepsakul, S. (1994). “Catenary curve revisited.”Proc., Spec. Offshore Symp., Int. Soc. of Offshore and Polar Engrs., 387–399.
14.
Huddleston, J. V.(1968). “A numerical technique of elastica problems.”J. Engrg. Mech. Div., ASCE, 94(5), 1159–1165.
15.
Lau, J. H.(1982). “Large deflections of beams with combined loads.”J. Engrg. Mech. Div., ASCE, 108(1), 180–185.
16.
Mattiasson, K.(1981). “Numerical results of large deflection beam and frame problems analyzed by means of elliptic integrals.”Int. J. Numer. Meth. Engrg., 17(1), 145–153.
17.
Miller, R. E.(1980). “Numerical analysis of a generalized plane elastica.”Int. J. Numer. Meth. Engrg., 15, 325–332.
18.
Navaee, S., and Elling, R. E.(1992). “Equilibrium configurations of cantilever beams subjected to inclined end loads.”J. Appl. Mech., 59(3), 572–579.
19.
Navaee, S., and Elling, R. E.(1993). “Possible ranges of end slope for cantilever beams.”J. Engrg. Mech., ASCE, 119(3), 630–635.
20.
Schile, R. D., and Sierakowski, R. L.(1967). “Large deflection of a beam loaded and supported at two points.”Int. J. Non-Linear Mech., 2, 61–68.
21.
Schmidt, W. F.(1977). “Finite element solution for the elastica problem.”J. Engrg. Mech. Div., ASCE, 103(6), 1171–1175.
22.
Seide, P.(1984). “Large deflections of a simply supported beam subjected to moment at one end.”J. Appl. Mech., 51(3), 519–525.
23.
Tada, Y., and Lee, G. C.(1970). “Finite element solution to an elastica problem of beams.”Int. J. Numer. Meth. Engrg., 2, 229–241.
24.
Wang, C. M., and Kitipornchai, S.(1992). “Shooting-optimization technique for large deflection analysis of structural members.”Engrg. Struct., 14(4), 231–240.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jul 1, 1997
Published in print: Jul 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.