Member Stiffness with Offset Hinges
Publication: Journal of Structural Engineering
Volume 123, Issue 4
Abstract
In the most simple case of plastic collapse, it is said that a hinge forms in a member when the moment capacity is reached. In the more complex case of plastic collapse, when the effect of axial load on the moment capacity is considered, it is argued here that an “offset hinge” is formed since as you move along an interaction or limit surface, the incremental moment is proportional to the incremental axial load. In this note the stiffness of a plane, elastic, straight member with offset hinges at either or both ends is derived. An example of plastic collapse taken from the European literature is included.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Gere, J. M. (1963). Moment distribution. D. van Nostrand Company, New York, N.Y.
2.
King, W. S., White, D. W., and Chen, W. F.(1992). “Second-order inelastic analysis methods for steel frame design.”J. Struct. Div., ASCE, 118(2), 408–429.
3.
King, W. S., and Chen, W. F.(1994). “Practical second-order inelastic analysis of semirigid frames.”J. Struct. Div., ASCE, 120(7), 2156–2175.
4.
Levy, R., and Spillers, W. R. (1995). Analysis of geometrically nonlinear structures. Chapman & Hall, Ltd., London, England.
5.
Spillers, W. R. (1972). Automated structural analysis: an introduction. Pergamon Press, Inc., New York, N.Y.
6.
Vogel, U.(1985). “Calibrating frames.”Stahlbau, 10, 295–301.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Apr 1, 1997
Published in print: Apr 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.