Method of Reliability-Based Seismic Design. II: Calibration of Code Parameters
Publication: Journal of Structural Engineering
Volume 123, Issue 3
Abstract
This is the second part of a two-part investigation on the method of a reliability-based seismic design. To account for large uncertainties in structural design under seismic load, a method of calibration of the design parameters in seismic codes is proposed based on the consideration of satisfactory performance under future earthquakes in terms of reliability. The calibration is carried out by a minimization of the difference between target and actual reliabilities against serviceability and ultimate limit states over a given period of time. The response surface method (RSM) in conjunction with a central composite design is used to expedite the minimization solution process. To reduce the computational effort required for reliability evaluation under seismic loads, the equivalent nonlinear system (ENS) developed in part I is used for dynamic-response analysis of multi–degree-of-freedom (MDOF) inelastic structures. Numerical examples on the calibration of the earthquake load factor and drift limit for selected target limit-state probabilities are given. Parametric studies are also carried out to examine the dependence of these parameters on the target reliability levels against both serviceability and ultimate limit states.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Institute of Steel Construction (AISC). (1986). Manual of steel construction, load resistance factor design (LRFD), 1st Ed., Chicago, Ill.
2.
Box, G. E. P., Hunter, W. G., and Hunter, J. S. (1978). Statistics for experimenter: an introduction to design, data analysis and model building. John Wiley & Sons, Inc., New York, N.Y.
3.
Building Seismic Safety Council. (1992a). NEHRP recommended provisions for the development of seismic regulations for new buildings, Part 1 Provisions, FEMA, Washington, D.C.
4.
Building Seismic Safety Council. (1992b). NEHRP recommended provisions for the development of seismic regulations for new buildings, Part 2 Commentary, FEMA, Washington, D.C.
5.
Corotis, R. B., and Tsay, W. Y.(1983). “Probabilistic load duration model for live load.”J. Struct. Engrg., ASCE, 109(4), 859–874.
6.
Ellingwood, B., Galambos, T. V., MacGregor, J. G., and Cornell, C. A. (1980). Development of a probability based load criterion for American national standard A58, National Bureau of Standards, NBS Special Publication 577, Washington, D.C.
7.
Han, S. W., and Wen, Y. K. (1994). “Method of reliability-based calibration of seismic design parameters.”Struct. Res. Ser. No. 595, Dept. of Civ. Engrg., Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
8.
Han, S. W., and Wen, Y. K.(1997). “Method of reliability-based seismic design. I: equivalent nonlinear system.”J. Struct. Engrg., ASCE, 123(3), 256–263.
9.
Hays, W. W. (1985). “Evaluation of site hazards.”Open File Rep. No. 85-371, U.S. Geological Survey, Washington, D.C.
10.
Hsu, H. M., and Hwang, H. M. (1989). “A study of reliability-based criteria for seismic design of reinforced concrete frame buildings.”Tech. Rep., Ctr. for Earthquake Res. and Information, Memphis State Univ., Memphis, Tenn.
11.
Iman, R., and Conover, W. J. (1980). “Small sample sensitivity analysis techniques for computer models, with an application to risk assessment.”Communications in statistics, theory and methods, Vol. A9, 1749–1842.
12.
Rojahn, C., and Sharpe, R. (1985). “Earthquake damage evaluation data for California.”ATC Rep., ATC-13, ATC, Redwood City, Calif.
13.
Shinozuka, M., Furuta, H., Emi, S., and Kubo, M. (1989). “Reliability-based LRFD for bridges: theoretical basis.”Proc., 5th Int. Conf. on Struct. Safety And Reliability (ICOSSAR), San Francisco, Calif.
14.
Siu, W. W.(1975). “Practical approach to code calibration.”J. Struct. Engrg., ASCE, 101(7), 1469–1480.
15.
Wen, Y. K. (1993). “Reliability-based design under multiple loads.”Int. J. Integrated Risk Assessment for Constructed Facilities, Structural Safety, Elsevier Science Publishers BV (North-Holland), Amsterdam, The Netherlands, 3–19.
16.
Wen, Y. K., Foutch, D. A., Elipoulos, D. F., and Yu, C. Y. (1994). “Seismic reliability of current code procedures for steel buildings.”Proc., 5th Nat. Conf. on Earthquake Engrg., Chicago, Ill., 147–426.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Mar 1, 1997
Published in print: Mar 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.