Method of Reliability-Based Seismic Design. I: Equivalent Nonlinear Systems
Publication: Journal of Structural Engineering
Volume 123, Issue 3
Abstract
This is the first part of a two-part investigation on the method of reliability-based seismic design. In reliability analysis and reliability-based design under stochastic loads such as seismic excitations, repeated time-history solutions of multi–degree-of-freedom (MDOF) inelastic structures are often required, which can become computationally expensive. To alleviate this difficulty, an approximate method is developed by replacing the MDOF system with a simple equivalent nonlinear system (ENS) that retains the dynamic characteristics of the first two modes and the global yielding behavior of the system. The equivalence is achieved by the use of two empirical response modification factors based on regression analyses of responses to a large number of actual ground accelerations recorded in past earthquakes. Numerical examples on reliability analysis of the special moment resistant space frame (SMRSF) under seismic excitations are given. The computational advantage and accuracy of the method are demonstrated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allahabadi, R., and Powell, G. H. (1988). DRAIN-2DX, computer program, UCB/EERC-88/06. EERC, Coll. of Engrg., Univ. of California, Berkerly, Calif.
2.
American Institute of Steel Construction (AISC). (1989). Manual of steel construction, allowable stress design (ASD), 9th Ed., Chicago, Ill.
3.
Converse, A. M. (1992). “Basic strong motion accelogram processing software, version 1.0.”U.S.G.S. Open File Rep. 92-296 A, U.S. Geological Survey, Washington, D.C.
4.
Eliopoulos, D. F., and Wen, Y. K. (1991). “Method of seismic reliability evaluation for moment resisting steel frames.”Struct. Res. Ser. No. 562, Dept. of Civ. Engrg., Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
5.
Han, S. W., and Wen, Y. K. (1994). “Method of reliability-based calibration of seismic design parameters.”Struct. Res. Ser. No. 595, Dept. of Civ. Engrg., Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
6.
Han, S. W., and Wen, Y. K.(1997). “Method of reliability-based seismic design. II: calibration of code parameters.”J. Struct. Engrg., ASCE, 123(3), 264–270.
7.
IGRESS-2, interative graphic environment for steel structures analysis and computer-aided design, user's manual. (1989). Prairie Technologies Inc., Urbana, Ill.
8.
Inoue, T., and Cornell, C. A. (1991). “Seismic hazard analysis of MDOF structures.”Proc., of ICASP, Mexico City, Mexico.
9.
Kennedy, R. P., Short, S. A., Merz, K. L., Tokarz, F. J., Idriss, I. M., Power, M. S., and Sadigh, K. (1984). “Engineering characterization of ground motion—task I: effects of characteristics of free-field motion on structural response.”NUREG/CR-3805, Vol. 1, U.S. Nuclear Regulatory Commission, Washington, D.C.
10.
Nassar, A. A., and Krawinkler, H. (1991). “Seismic demands for SDOF and MDOF systems.”Rep. No. 95, Dept. of Civ. Engrg., Stanford Univ., Stanford, Calif.
11.
Naeim, F., and Anderson, J. C. (1993). “Classification and evaluation of earthquake records for design.”1993 NEHRP Profl. Fellowship Rep., EERI, Oakland, Calif., July 1993.
12.
Osteraas, J. D., and Krawinkler, H. (1990). “Strength and ductility consideration in seismic design.”Rep. No. 90, Dept. of Civ. Engrg., Stanford Univ., Stanford, Calif.
13.
Riddel, R., Newmark, N. M., and Hall, W. J. (1979). “Statistical analysis of the response of nonlinear systems subjected to earthquakes.”Struct. Res. Ser. No. 468, Dept. of Civ. Engrg., Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
14.
Rojahn, C., and Sharpe, R. (1985). “Earthquake damage evaluation data for California.”ATC Rep., ATC-13, ATC, Redwood City, Calif.
15.
Seekins, L. C., Brady, A. G., Carpenter, C., and Brown, N. (1992). “Digitized strong motion accelograms of North and Central America earthquakes 1933–1986.”U.S.G.S. Digital Data Ser. DDS-7, U.S. Geological Survey, Washington, D.C.
16.
Uniform building code. (1988). International Conference of Building Officials, Whittier, Calif.
17.
Uniform building code. (1991). International Conference of Building Officials, Whittier, Calif.
18.
Wakabayashi, M. (1986). Design of earthquake resistant buildings. McGraw-Hill Book Co., Inc., New York, N.Y.
19.
Wen, Y. K., Foutch, D. A., Elipoulos, D. F., and Yu, C. Y. (1994). “Seismic reliability of current code procedures for steel buildings.”Proc., 5th Nat. Conf. on Earthquake Engrg., Chicago, Ill., 147–426.
20.
Yeh, C. H., and Wen, Y. K. (1989). Modeling of nonstationary earthquake ground motion and biaxial and torsional response of inelastic structures, SRSS No. 546, Dept. of Civ. Engrg., Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Mar 1, 1997
Published in print: Mar 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.