Cross-Frame Spacing and Parametric Effects in Horizontally Curved I-Girder Bridges
Publication: Journal of Structural Engineering
Volume 122, Issue 9
Abstract
The finite-element method was used to create detailed models of horizontally curved steel I-girder bridges connected by cross frames. The effects of a number of parameters on the behavior of the curved girder system were established and compared to the effect of these parameters in straight girder systems. The parameters that most significantly affect the behavior of the systems were determined to be the degree of curvature, span length, and flange width. An equation was developed based on a nonlinear statistical regression to provide a preliminary design limit for the cross-frame spacing interval. The results of the equation were compared to those results obtained by previous equations developed by various methods for the same purpose.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS-manual. (1988). Version 4-7, Hibbitt, Karlsson, and Sorenson, Inc., Pawtucket, R.I.
2.
AISC Marketing, Inc. (1993a). Bridges, a preliminary design study: flyover ramp DB, Charlotte, North Carolina, PDS 93/005, Pittsburgh, Pa.
3.
AISC Marketing, Inc. (1993b). Bridges, a preliminary design study: NH Rte. 27 over Rte. 51, Hampton, New Hampshire, PDS 92/067, Pittsburgh, Pa.
4.
AISC Marketing, Inc. (1993c). Bridges, a preliminary design study: ramp 14, Florida ave. bridge over IHNC, Orleans Parish, Louisiana, PDS 93/009, Pittsburg, Pa.
5.
American Association of State Highway and Transportation Officials (AASHTO). (1992). Standard specifications for highway bridges, 15th Ed., Washington, D.C.
6.
American Association of State Highway and Transportation Officials (AASHTO). (1993). Guide specifications for horizontally curved highway bridges, Washington, D.C.
7.
Brockenbrough, R. L.(1986). “Distribution factors for curved I-girder bridges.”J. Struct. Engrg., ASCE, 112(10), 2200–2215.
8.
Galambos, T. V. (1968). Structural members and frames . Prentice-Hall, Inc., Englewood Cliffs, N.J.
9.
Heins, C. P., and Jin, J. O.(1984). “Live load distribution on braced curved I-girders.”J. Struct. Engrg., ASCE, 110(3), 523–530.
10.
Hikosaka, H., and Takami, K. (1985). “Formulation of distortional behavior of thin-walled curved beam with open cross section.”Proc., Struct. Engrg./Earthquake Engrg., Japan Society of Civil Engineers, 2(1) (in Japanese).
11.
Keller, M. A. (1994). “Parametric study of horizontally curved I-girder systems including lateral bracing effects,” Ms thesis, Auburn Univ., Auburn, Ala.
12.
McManus, P. F., Nasir, G. A., and Culver, C. G.(1969). “Horizontally curved girders—state of the art.”J. Struct. Div., ASCE, 95(5), 853–870.
13.
Nakai, H., and Yoo, C. H. (1988). Analysis and design of curved steel bridges . McGraw-Hill Book Co., Inc., New York, N.Y.
14.
Richardson, Gordon, and Associates. (1976). Curved girder workshop lecture notes, FHWA DOT-FH-11-8815, Pittsburgh, Pa.
15.
SAS Institute Inc. (1988). SAS/IML user's guide, Release 6.03 Ed., SAS Institute Inc., Cary, N.C.
16.
Schelling, D., Namini, A. H., and Fu, C. C.(1989). “Construction effects on bracing on curved I-girders.”J. Struct. Engrg., ASCE, 115(9), 2145–2165.
17.
United States Steel Corporation. (1984). “V-load analysis, an approximate procedure, simplified and extended for determining moments and shears in designing horizontally-curved open-framed highway bridges.”USS highway structures design handbook, Pittsburgh, Pa., 1–53.
18.
Vlasov, V. Z. (1961). Thin-walled elastic beams, 2nd Ed., National Science Foundation, Washington, D.C.
19.
Yoo, C. H., and Heins, C. P.(1972). “Plastic collapse of horizontally curved bridge girders.”J. Struct. Div., ASCE, 98(4), 899–914.
20.
Yoo, C. H., and Littrell, P. C.(1986). “Cross-Bracing Effects in Curved Stringer Bridges.”J. Struct. Engrg., ASCE, 112(9), 2127–2140.
21.
Zureick, A., Naqib, R., and Yadlosky, J. M. (1993). “Curved steel bridge research project vol. I.”Interim Rep. (Synthesis), FHWA-RD-93-129, McLain, Va., 1–104.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Sep 1, 1996
Published in print: Sep 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.