Double-Layer Grids: Review of Dynamic Analysis Methods and Special Topics
Publication: Journal of Structural Engineering
Volume 122, Issue 8
Abstract
This is the second part of a two-part paper on the general review of static, dynamic, and thermal analysis methods, and special topics for the design of double-layer grids (DLG). This work forms part of the anticipated report of the ASCE Task Committee on Double Layer Grids. In this paper the current state-of-the-art information pertaining to the dynamic analysis techniques and special topics for the DLG structural system are reviewed with references to both practical and research tools for analysis. A comprehensive reference list is provided, which covers many conventional and emerging topics related to the analysis of DLGs. Topics presented include dynamic linear, nonlinear and stability analyses, dynamic loadings, progressive collapse, dynamic effects of member failure, optimization techniques, probabilistic methods, vibration control, system identification and damage detection, special application DLGs, and other newly emerging analysis methods. The first paper dealt with static and thermal analysis and member behavior. The information presented in this paper is useful to the practicing engineer and for research. Some of the information though not directly applicable in routine design, may have to be considered for special cases and as the design and construction capabilities of DLGs are enhanced.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdel-Mooty, M., and Roorda, J. (1991). “Optimal control configuration for active control of structural vibrations.”Mechanics computing in 1990s and beyond, H. Adeli and R. Sierakowski, eds., ASCE, New York, N.Y., 756–760.
2.
Abrate, S., and Sun, C. T.(1983). “Dynamic analysis of geometrically nonlinear truss structures.”Comp. and Struct., 17(4), 491–497.
3.
Adeli, H., and Balasubramanyam, K.(1987). “Interactive layout optimization of trusses.”J. Comp. Pract. in Civ. Engrg., ASCE, 1(3), 183–196.
4.
Adelman, H., and Haftka, R.(1986). “Sensitivity analysis of discrete structural systems.”AIAA J., 24(5), 823–832.
5.
Adib-Jahromi, H., Malla, R., and Accorsi, M. L. (1994). “Double-skinned truss structures for lunar applications.”Engineering, construction and operations in space IV, R. Galloway and S. Lokaj, eds., ASCE, New York, N.Y., Vol. 1, February, 46–56.
6.
Agerskov, H.(1986). “Optimum geometry design of double-layer space trusses.”J. Struct. Engrg., ASCE, 112(6), 1454–1463.
7.
Akgun, M., and Ju, F.(1990). “Damage diagnosis in frame structures with a dynamic response method.”J. Mech. of Struct. and Machines, 18(2), 175–187.
8.
Alam, J., and Berke, L. (1991). “Application of artificial neural networks in nonlinear analysis of trusses.”NASA Tech. Memo. 105319, Lewis Res. Ctr., Nat. Aeronautics and Space Admin. (NASA), Cleveland, Ohio.
9.
Al-Geroushi, R., and Hammoud, G. (1993). “Reliability analysis of space structural systems.”Space structures-4, G. Parke and C. Howard, eds., Vol. 2, Thomas Telford, London, England, 1348–1353.
10.
Anderson, M. S.(1982). “Vibration of prestressed periodic lattice structures.”AIAA J., 20(4), 551–555.
11.
Anderson, M. S., and Nimmo, N. A.(1986). “Dynamic characteristics of statically determinate space-truss platforms.”J. Spacecraft and Rockets, 23(3), 303.
12.
Anderson, W., and Newsom, J. (1991). “The NASA-LaRC control-structures interactions (CSI) technology program.”Proc., 2nd Joint Japan/U.S. Conf. on Adaptive Struct., Y. Matsuzaki and B. Wada, eds., Technomic Publ. Co., Lancaster, Pa., 15–31.
13.
Aranburu, I., and Cavia, P. (1993). “Dynamic behaviour of slender tubular members of space structures under wind loading.”Space structures-4, G. Parke and C. Howard, eds., Vol. 1, Thomas Telford, London, England, 703–714.
14.
Arora, J. S. (1989). Introduction to optimum design . McGraw-Hill Book Co., Inc., New York, N.Y.
15.
Arora, J. S., and Haug, E. J.(1979). “Method of design sensitivity analysis in structural optimization.”AIAA J., 17(9), 970–974.
16.
Arora, J. S., and Thanedar, P. B.(1986). “Computational methods for optimum design of large complex systems.”Computational Mech., 1(2), 221–242.
17.
Austin, M., Pister, K., and Mahin, S.(1987a). “Probabilistic design of earthquake-resistant structures.”J. Struct. Engrg., ASCE, 113(8), 1642–1659.
18.
Austin, M., Pister, K., and Mahin, S.(1987b). “Probabilistic design of moment-resistant frames under seismic loading.”J. Struct. Engrg., ASCE, 113(8), 1660–1677.
19.
Avent, R., and Issa, R. (1989). “Discrete field stability analysis of latticed towers.”Structural design, analytical test, ASCE, New York, N.Y., 932–941.
20.
Bainum, P., Hamsath, N., and Krishna, R.(1989). “The dynamics and control of large space structures after the onset of thermal shock.”Acta Astronautica, 19(1), 1–8.
21.
Bathe, K.-J. (1982). Finite element procedures in engineering analysis . Prentice-Hall, Inc., Englewood Cliffs, N.J. Bendiksen, O. (1987). “Mode localization phenomenon in large space structures.”AIAA J., 25(9), 1241–1248.
22.
Bennigho, J., and Meirovitch, L.(1986). “Modal control of traveling waves in flexible structures.”J. Sound and Vibration, 111(1), 131–144.
23.
Berry, D., Yang, T., and Skelton, R.(1985). “Dynamics and control of lattice beams using simplified finite element models.”J. Guidance and Control, 8(5), 612–619.
24.
Biggs, J. M. (1964). Introduction to structural dynamics . McGraw-Hill Book Co., Inc., New York, N.Y.
25.
Bjerager, P. (1985). “Reliability analysis of brittle structural systems.”Proc., 3rd Int. Conf. on Struct. Safety and Reliability, Elsevier Science Publishers, Amsterdam, The Netherlands, I-149–I-155.
26.
Blandford, G., and Wang, S. (1993). “Response of space trusses during progressive failure.”Dynamic response and progressive failure of special structures, R. Malla, ed., ASCE, New York, N.Y., 1–16.
27.
Bolotin, V. V. (1964). The dynamic stability of elastic systems . Holden-Day, Oakland, Calif.
28.
Breitbach, E. (1991). “Research status on adaptive structures in Europe.”Proc., 2nd Joint Japan/U.S. Conf. on Adaptive Struct., Y. Matsuzaki and B. Wada, eds., Technomic Publ. Co., Lancaster, Pa., 32–47.
29.
Burdisso, R., and Haftka, R.(1989). “Optimal location of actuators for correcting distortions in large truss structures.”AIAA J., 27(10), 1406–1411.
30.
Chan, S. L., and Chui, P. P. (1993). “Non-linear dynamic analysis of roof trusses connected by rigid, pinned and semi-rigid joints.”Space structures-4, G. Parke and C. Howard, eds., Vol. 1, Thomas Telford, London, England, 406–412.
31.
Chawla, V., Utku, S., and Wada, B. (1993). “Vibration control by limiting the maximum axial forces in space trusses.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3279–3288.
32.
Chen, J.-C.(1984). “Response of large space structures with stiffness control.”J. Spacecraft and Rockets, 21(5), 463–467.
33.
Chen, J.-C., and Garba, J.(1980). “Analytical model improvement using modal test results.”AIAA J., 18(6), 684–690.
34.
Chen, J.-C., and Garba, J. A.(1988). “On-orbit damage assessment for large space structures.”AIAA J., 26(9), 1119–1126.
35.
Chen, J.-C., Pretti, L., and Garba, J.(1987). “Spacecraft structural model improvement by modal test results.”J. Spacecraft and Rockets, 24(1), 90–94.
36.
Chu, H. S. (1984). “Analysis and experimentation of composite space slab-grid structure.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 192–195.
37.
Clough, R., and Penzien, J. (1993). Dynamics of Structures, 2nd Ed., McGraw-Hill, N.Y.
38.
Clough, R. W., and Wilson, E. L. (1979). “Dynamic analysis of large structural systems with local nonlinearities.”Comp. Methods in Appl. Mech. and Engrg., Vol. 17/18, 107–109.
39.
Cohn, M. Z., and Dinovitzer, A. S.(1994). “Application of structural optimization.”J. Struct. Engrg., ASCE, 120(2), 617–650.
40.
Craig, R. Jr. (1981). Structural dynamics—an introduction to computer methods, John Wiley & Sons, Inc., New York, N.Y.
41.
Dannemann, R. (1991). “Modification of behavior of double-layer grids: overview.”J. Struct. Engrg., 117(5), ASCE, 1570–1572.
42.
Davies, G., and Neal, B. G. (1959). “The dynamical behavior of a strut in a truss framework.”Proc., Royal Soc., London, England, A253, 542–562.
43.
Davister, M. D., and Britvec, S. J. (1984). “Evaluation of the most unstable dynamic-buckling mode of pin-jointed space lattice.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 468–473.
44.
Do, T. T., Miller, M. D., Kempner, L., Lyver, and Mueller, W. H. (1993). “Collapse load calculated by probability based analysis compared to full scale tower test results.”Dynamic response and progressive failure of special structures, R. Malla, ed., ASCE, New York, N.Y., 48–59.
45.
Dowrick, D. J. (1977). Earthquake resistant design . 2nd Ed., John Wiley & Sons, Inc., New York, N.Y.
46.
Ebihara, M., and Igusa, T. (1993). “A combined global/local control concept for truss structures.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3328–3331.
47.
Eliopoulos, D., and Wen, Y. (1991). “System identification techniques for inelastic structures.”Mechanics computing in 1990s and beyond, H. Adeli and R. Sierakowski, eds., ASCE, New York, N.Y., 801–805.
48.
Ellingwood, B., and Leyendecker, E.(1978). “Approaches for design against progressive collapse.”J. Struct. Div., ASCE, 104(3), 413–423.
49.
Ellingwood, B., Leyendecker, E., and Yao, J.(1983). “Probability of failure from abnormal load.”J. Struct. Engrg., ASCE, 109(4), 875–890.
50.
El-Sheikh, A. I., and McConnel, R. E.(1993). “Experimental study of behaviour of composite space trusses.”J. Struct. Engrg., ASCE, 119(3), 747–766.
51.
Estevez, J., Pablos, J., Muniz, S., Freire, M., Vazquez, R., and Alvarez, J. (1993). “Double-layer space structures of laminated timber tubular members.”Space structures-4, G. Parke and C. M. Howard, eds., Vol. 1, Thomas Telford, London, England, 563–572.
52.
Filho, F. V., Continho, A. L., Landeau, L., Lima, E., and Ebecken, N.(1988). “Nonlinear dynamic analysis using the pseudo-force method and the Lanczos algorithm.”Comp. and Struct., 30(4), 979–983.
53.
Frangopol, D. M.(1987). “Effects of damage and redundancy on structural reliability.”J. Struct. Engrg., ASCE, 113(7), 1533–1549.
54.
Frangopol, D. M., and Klisinski, M.(1989). “Weight-strength-redundancy interaction in optimum design of three-dimensional brittle-ductile trusses.”Comp. and Struct., 31(5), 775–787.
55.
Galambos, T. V. (1968). Structural members and frames . Prentice-Hall, Inc., Englewood Cliffs, N.J., Chapter 1.
56.
Gantes, C., Connor, J., Logcher, R., and Rosenfeld, Y.(1989). “Structural analysis and design of deployable structures.”Comp. and Struct., 32(3/4), 661–669.
57.
Gantes, C., Connor, J., and Logcher, R. (1991). “Geometric and structural design considerations for deployable space frames.”Proc., Int. Conf. on Mobile and Rapidly Assembled Struct., P. Bulson, ed., 249–260.
58.
Gawkowska, L. (1987). “A method for the optimization of space trusses.”Bull. Int. Assn. for Shell and Spatial Struct., XXVIII(95), 59–63.
59.
Ghavani, K., and Moreira, L. (1993). “Double-layer bamboo space structures.”Space structures-4, G. Parke and C. Howard, eds., Vol. 1, Thomas Telford, London, England, 573–581.
60.
Gross, J. L., and McGuire, W.(1983). “Progressive collapse resistant design.”J. Struct. Engrg., ASCE, 109(1), 1–15.
61.
Gutkowski, W. (1986). “Optimum design of space frames.”Bull. Int. Assn. for Shell and Spatial Struct., XXVII(91), 27–30.
62.
Hac, A., and Spanos, P. (1987). “Time domain structural parameters identification.”Dynamics of structures, J. Roesset, ed., ASCE, New York, N.Y., 841–858.
63.
Haftka, R., and Adelman, H.(1989). “Recent developments in structural sensitivity analysis.”Struct. Optimization, 1, 137–151.
64.
Hajela, P., and Soeiro, F. (1989). “Recent development in damage detection based on systems identification methods.”J. Struct. Optimization.
65.
Hajela, P., and Soeiro, F.(1990). “Structural damage detection based on static and modal analysis.”AIAA J., 28(6), 1110–1115.
66.
Hanaor, A.(1991). “Double-layer tensegrity grids: static load response. II: Experimental study.”J. Struct. Engrg., ASCE, 117(6), 1675–1684.
67.
Hanaor, A., and Levy, R.(1985). “Imposed lack of fit as a mean of enhancing space truss design.”Space Struct., 1(3), 147–154.
68.
Hanaor, A., and Liao, M.-K.(1991). “Double-layer tensegrity grids: static load response. I: Analytical study.”J. Struct. Engrg., ASCE, 117(6), 1660–1674.
69.
Hanaor, A., and Schmidt, L.(1980). “Space truss studies with force limiting devices.”J. Struct. Div., ASCE, 106(11), 2313–2329.
70.
Hanaor, A., Marsh, C., and Parke, G.(1989). “Modification of behavior of double-layer grids: overview.”J. Struct. Engrg., ASCE, 115(5), 1021–1037.
71.
Haug, E., Choi, K., and Komkov, V. (1986). Design sensitivity analysis of structural systems. Academic Press, Orlando, Fla.
72.
He, S., and Rao, M.(1992). “Longitudinal vibration and damping analysis of adhesively bonded double-strap joints.”J. Vibration and Acoustic, 114, 330–337.
73.
Hedgepeth, J. (1975). “Survey of future requirements for large space structures.”NASA CR-2621, Nat. Aeronautics and Space Admin., (NASA), Washington, D.C.
74.
Hodges, C.(1982). “Confinement of vibration by structural irregularity.”J. Sound and Vibration, 82(3), 441–424.
75.
Hodges, C., and Woodhouse, J.(1983). “Vibration isolation from irregularity in a nearly periodic structures: theory and measurements.”J. Acoustic Soc. Am, 74(3), 894–905.
76.
Hoff, N. (1965). “Dynamic stability of structures.”Dynamic stability of structures, G. Hermann, ed., Pergamon Press, Inc., Tarrytown, N.Y., 7–41.
77.
Hofmeister, L., and Felton, L.(1970). “Prestressing in structural synthesis.”AIAA J., 8(2), 363–366.
78.
Hollaway, L., and Baker, S. (1984). “The development of nodal joints suitable for double-layer skeletal systems made from fibre/matrix composites.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 908–913.
79.
Hollaway, L., Farhan, A., and Gunn, M. J.(1988). “A continuum vibrational analysis for a tetrahedral space platform.”Int. J. Space Struct., 3(2), 104–117.
80.
Hollkamp, J. (1993). “Multimodal passive vibration suppression with piezoelectrics.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3227–3237.
81.
Holnicki-Szulc, J.(1979). “Prestressing of truss and frame structures.”J. Struct. Div., ASCE, 105(3), 601–616.
82.
Holzer, S. (1984). “Dynamic consideration in latticed structures.”J. Struct. Engrg., 110(10), ASCE, New York, N.Y., 2547–2551.
83.
Ishakian, V. G., and Hollaway, L. (1984). “Application of the finite element method to the analysis of a continuum/skeletal double layer structure.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 319–325.
84.
Ishikawa, K., and Kato, S. (1993). “Dynamic buckling behavior of single and double-layer latticed domes due to vertical earthquake motions.”Space structures-4, G. Parke and C. Howard, eds., Vol. 1, Thomas Telford, London, England, 466–475.
85.
Jaihal, P., Utku, S., and Wada, B. (1993). “Actuator placement in pretressed adaptive trusses for the vibration control.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3312–3318.
86.
Joseph, K.(1989). “New implementation of the force method and the optimum design of large trusses.”Int. J. for Numer. Methods in Engrg., 28(4), 893–907.
87.
Juang, J. (1993). “An overview of recent advances in system identification.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3342–3351.
88.
Kamat, M. P. (1993). Structural optimization: status and promise . Am. Inst. of Astronautics and Aeronautics (AIAA), Washington, D.C.
89.
Karamanos, A. S., and Karamanos, S. A. (1993). “Seismic design of double-layer space grids and their supports.”Space structures-4, G. Parke and C. Howard, eds., Vol. 1, Thomas Telford, London, England, 476–484.
90.
Karczewski, J., and Paczkowski, W.(1994). “Discrete multicriterion optimization of a space truss.”Int. J. Space Struct., 9(1), 27–38.
91.
Kato, S., Nakazawa, S., Matsue, Y., and Yamashita, T. (1994). “Active control of axial forces in beam string space frames.”Spatial, lattice, and tension structures, J. Abel, W. Leonard, and C. Penalba, eds., ASCE, New York, N.Y., 664–673.
92.
Kirsch, U.(1989). “Optimal topologies of truss structures.”Comp. Methods in Appl. Mech. and Engrg., 72(1), 15–28.
93.
Klingmuller, O. (1989). “Redundancy of structures and probability of failure.”Proc., 3rd Int. Conf. on Struct. Safety and Reliability, Elsevier Science Publishers, Amsterdam, The Netherlands, 331–340.
94.
Konishi, Y., Takahashi, K., and Ryu, H. (1989). “A study of optimum design using suboptimization.”Computer utilization structural engineering; Proc., 1989 Struct. Congr., ASCE, New York, N.Y., 211–216.
95.
Kukreti, A. R., and Uchil, N. D.(1989). “Dynamic response analysis of large lattice space structures.”Int. J. of Space Struct., 4, 25.
96.
Kunieda, H. (1993). “Dynamic stability of spherical domes subject to earthquakes.”Space structure-4, G. Parke and C. Howard, eds., Vol. 1, Thomas Telford, London, England, 507–516.
97.
Lajczok, M.(1987). “Optimization of equivalent periodic truss structures.”AIAA J., 25(3), 502–504.
98.
La Tegola, A., Ombres, L., and Pecora, C. (1993). “Computer-aided design of reticular space structures with random behaviour elements.”Space structures-4, G. A. R. Parke and C. M. Howard, eds., Vol. 2, Thomas Telford, London, England, 1295–1304.
99.
Leung, A. Y.(1980). “Dynamic analysis of periodic structures.”J. Sound and Vibr., 72(4), 451–467.
100.
Levy, R. (1985). “Linear programming in prestressed trusses.”Proc., 2nd Int. Conf. on Civ. and Struct. Engrg. Computing, 317–381.
101.
Levy, R., and Brill, D. R. (1989). “Optimization for stability of 2-bar trusses.”Computer utilization structural engineering; Proc., 1989 ASCE Struct. Congr., ASCE, New York, N.Y., 520–529.
102.
Levy, R., and Hanaor, A.(1992). “Optimization design of prestressed trusses.”Comp. and Struct., 43(4), 741–744.
103.
Levy, R., Hanaor, A., and Rizzuto, N.(1994). “Experimental investigation of prestressing in double-layer grids.”Int. J. Space Struct., 9(1), 21–26.
104.
Lev Zetlin Associates. (1978). Report of the engineering investigation concerning the causes of the collapse of the Hartford Coliseum Truss Roof on January 18, 1978 . Hartford, Conn.
105.
Li, D., and Benaroya, H.(1992). “Dynamics of periodic and near-periodic structures.”Appl. Mech. Rev., 45(11), 447–459.
106.
Lin, C.-C., and Liu, I.-W.(1989). “Optimal design based on optimality criterion for frame structures including buckling constraint.”Comp. and Struct., 31(4), 535–544.
107.
Machaly, E.-S.(1986). “Optimum weight analysis of steel grids with semirigid connections.”Comp. and Struct., 23(5), 565–574.
108.
Madi, U. R. (1984). “Idealising the members behaviour in the analysis of pin-jointed spatial structures.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 462–467.
109.
Majid, K. I. (1984). “The design of space frames subject to deflection limitations.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 296–300.
110.
Malla, R., and Nalluri, B. (1994). “Response of truss structures subjected to dynamic loads during member failure.”Spatial, lattice and tension structures, J. Abel, J. Leonard, and C. Penalba, eds., ASCE, New York, N.Y., 249–258.
111.
Malla, R., and Nalluri, B. (1995a). “Stability of double layer grid structures subjected to dynamic loads.”Proc., ASCE Struct. Congr. XIII, ASCE, New York, N.Y., 68–71.
112.
Malla, R. B., and Nalluri, N.(1995b). “Dynamic effects of member failure on the response of truss type space structures.”J. Spacecraft and Rockets, 32(3), 545–551.
113.
Malla, R. B., and Pai, S. S. (1995). “Probabilistic response of a truss-type space structure with joint and member imperfections.”J. Spacecraft and Rockets, 32(4).
114.
Malla, R., and Serrette, R. (1996). “Double-layer grid: review of static and thermal analysis methods.”J. Struct. Engrg., ASCE, 122(8), 873–881.
115.
Malla, R., and Wang, B. (1992). “Response of space structures under sudden local damage.”Engineering, construction and operations in space III, W. Sadeh, S. Sture, and R. Miller, eds., ASCE, New York, N.Y., 909–920.
116.
Malla, R., and Wang, B. (1993). “A method to determine dynamic response of truss structures during sudden consecutive member failure.”Space structures-4, G. A. R. Parke and C. M. Howard, eds., Vol. 1, Thomas Telford, London, England, 413–422.
117.
Malla, R., Wang, B., and Nalluri, B. (1993). “Dynamic effects of progressive member failure on the response of truss structures.”Dynamic response and progressive failure of special structures, R. Malla, ed., ASCE, New York, N.Y., 60–76.
118.
Malla, R., Wang, B., and Nalluri, B.(1995). “Dynamic member failure in trusses by pseudo-force method.”Int. J. of Space Struct., Brentwood, England, 10(2), 99–112.
119.
Manning, R. A. (1991). “Optimum design of intelligent truss structures.”Proc., Struct., Struct. Dynamics and Mat. Conf., Part 1, Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 528–533.
120.
Manual of Steel Construction: LRFD. (1986). Am. Inst. of Steel Constr. (AISC), Chicago, Ill.
121.
Marsh, C. (1986). “Improving space truss performance by member removal.”Shells, membranes and space frames, K. Heki, ed., Elsevier Science Publishers, Amsterdam, The Netherlands, Vol. 3, 215–220.
122.
Marsh, C., and Ford, M. (1984). “Optimization of space trusses using non-linear behaviour of eccentric diagonals.”Proc., Inst. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 669–676.
123.
Martindale, S., and Wirsching, P.(1983). “Reliability-based progressive failure collapse.”J. Struct. Engrg., ASCE, 109(8), 1792–1811.
124.
Matsuzaki, Y., and Wada, B. (eds.) (1991). Proc., 2nd Joint Japan/U.S. Conf. on Adaptive Struct., Technomic Publ. Co., Lancaster, Pa.
125.
McTavish, D., and Hughes, P.(1993). “Modeling of linear viscoelastic space structures.”J. Vibration and Acoustics, 115, 103–110.
126.
McTavish, D., Hughes, P., Soucy, Y., and Graham, W.(1992). “Prediction and measurement of modal damping factors for viscoelastic space structures.”AIAA J., 30(5), 1392–1399.
127.
Meirovitch, L. (1990). Dynamics and control of structures . John Wiley & Sons, Inc., New York, N.Y.
128.
Mettler, E. (1962). “Dynamic buckling.”Handbook of engineering mechanics, W. Flugge, ed., McGraw-Hill Book Co., Inc., New York, N.Y., 62-1–62-11.
129.
Mikulas, M., Bush, H., and Card, M. (1977). “Structural stiffness, strength and dynamic characteristic of large tetrahedral space truss structures.”NASA TM X-74001, Langley Res. Ctr., Nat. Aeronautics and Space Admin. (NASA), Hampton, Va.
130.
Miller, C. A., and Kamm, R. F. (1967). “The dynamic analysis of non-orthogonal grid systems.”Space structures, R. M. Davies, ed., Blackwell Scientific Publications, Ltd., Oxford, England, 305.
131.
Minesugi, K. and Kondo, K. (1993). “Semi-active vibration suppression of large space structures with a variable axial stiffness member.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3305–3311.
132.
Minimum design loads for building and other structures. (1994). ASCE, New York.
133.
Miura, K., and Furuya, H.(1988). “Adaptive structure concept for future space application (variable geometry truss).”AIAA J., 26, 995–1002.
134.
Miura, K., and Natori, M. (1991). “Aerospace research status on adaptive structures in Japan.”Proc., 2nd Joint Japan/U.S. Conf. on Adaptive Struct., Y. Matsuzaki and B. Wada, eds., Technomic Publ. Co., Lancaster, Pa., 3–14.
135.
Morris, N.(1993a). “Effect of member snap on space truss collapse.”J. Engrg. Mech., ASCE, 119(4), 870–886.
136.
Morris, N. (1993b). “Effect of member snap on progressive failure collapse of space structures.”Dynamic response and progressive failure of special structures, R. Malla, ed., ASCE, New York, N.Y., 17–31.
137.
Mozer, J., Peyrot, A., and DiGioia, A. (1984). “Probabilistic design of transmission line structures.”J. Struct. Engrg., ASCE, 110(10), 2513–2528.
138.
Murotsu, Y., Okada, H., Yonezawa, and Taguchi, K. (1989). “Reliability assessment of redundant structure.”Proc., 3rd Int. Conf. on Struct. Safety and Reliability, 315–329.
139.
Murozono, M., and Sumi, S. (1991). “Active vibration control of a flexible cantilever beam by applying thermal bending moment.”Proc., 2nd Joint Japan/U.S. Conf. on Adaptive Struct., Y. Matsuzaki and B. Wada, eds., Technomic Publ. Co., Lancaster, Pa., 315–331.
140.
Murtha-Smith, E. A.(1988). “Alternate path analysis of space trusses for progressive collapse.”J. Struct. Engrg., ASCE, 114(9), 1978–1999.
141.
Muzeau, J., Fogli, M., and Lemaire, M. (1984). “Buckling of structures in probabilistic context.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 486–491.
142.
Nakamura, T., and Ohsaki, M. (1993). “Earthquake-strain constrained design for large space frames.”Space structures-4, G. A. R. Parke and C. M. Howard, eds., Vol. 1, Thomas Telford, London, England, 497–506.
143.
Nayfeh, A. H., and Hartle, M. S. (1984). “Dynamic characteristics of large repetitive framelike structures.”J. Appl. Mech., (Sep.), 510–518.
144.
Necib, B., and Sun, C.(1989). “Analysis of truss beams using a high order Timoshenko beam finite element.”J. Sound and Vibration, 130(1), 149–159.
145.
Newmark, N. M., and Rosenblueth, E. (1971). Fundamentals of earthquake engineering . Prentice-Hall, Inc., Englewood Cliffs, N.J.
146.
Nickell, R. E.(1976). “Nonlinear dynamics by mode superposition.”Comp. Methods in Appl. Mech. and Engrg., 7, 107–129.
147.
Niczyj, J., and Paczkowski, W. (1993). “An expert system for discrete optimization of space trusses.”Space structures-4, G. Parke and C. Howard, eds., Vol. 2, Thomas Telford, London, England, 1756–1765.
148.
Nishimura, I. et al. (1993). “An intelligent tuned mass damper.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3561–3569.
149.
Noor, A. K., Anderson, M. S., and Greene, W. H.(1978). “Continuum model for beamand plate-like lattice structures.”AIAA J., 16(12), 1219–1228.
150.
Ohkubo, S., Nakajima, T., and Asai, K. (1989). “Total optimization of truss considering shape, material and sizing variables.”Computer utilization structural engineering; Proc., Struct. Congr. 1989, ASCE, New York, N.Y., 247–256.
151.
Onada, J.(1988). “Two-dimensional deployable truss structures for space applications.”J. Spacecraft and Rockets, 25(2), 109–116.
152.
Oran, C., and Kassimali, A.(1976). “Large deformations of frame structures under static and dynamic loads.”Comp. and Struct., 6(6), 539–547.
153.
Osegueda, R., and DSouza, P. (1992). “Damage evaluation of an offshore structure model using vibration measurement.”Proc., 2nd Int. Offshore and Polar Engrg. Conf., 550.
154.
Pai, S. S., and Chamis, C. C. (1991). “Probabilistic progressive buckling of trusses.”NASA TM-105162, Lewis Res. Ctr., Nat. Aeronautics and Space Admin. (NASA), Cleveland, Ohio.
155.
Pai, S. S., and Chamis, C. C. (1992). “Probabilistic assessment of space trusses subjected to combined mechanical and thermal loads.”NASA TM-105429, Lewis Res. Ctr., Nat. Aeronautics and Space Admin. (NASA), Cleveland, Ohio.
156.
Pandey, A., Biswas, M., and Samman, M.(1991). “Damage detection from changes in curvature mode shapes.”J. Sound and Vibration, 145(2), 321–332.
157.
Pappa, R. (1990). “Identification challenges for large space structures.”Sound and Vibration, 16–21.
158.
Parke, G. A. R. (1993). “A novel soft member for space trusses.”Space structures-4, G. A. R. Parke and C. M. Howard, eds., Vol. 1, Thomas Telford, London, England, 116–126.
159.
Parke, G. A. R., and Walker, H. B. (1984). “A limit design of double-layer grids.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 528–532.
160.
Paz, M. (1991). Structural dynamics—theory and computation, 3rd Ed., Van Nostrand Reinhold, New York, N.Y.
161.
Pierre, C.(1990). “Weak and strong vibration localization in disordered structures: a statistical investigation.”J. Sound and Vibration, 139(1), 111–132.
162.
Pierre, C., and Cha, P.(1989). “Strong mode localization in nearly periodic disordered structures.”AIAA J., 27(2), 227–241.
163.
Pinson, L. D.(1989). “Recent advances in structural dynamics of large space structures.”Acta Astronautica, 19(2), 161–170.
164.
Rao, S., and Sunar, M.(1994). “Piezoelectricity and its use in disturbance sensing and control of flexible structures: a survey.”Appl. Mech. Rev., 47(4), 113–123.
165.
Rao, S., Pan, T., and Venkayya, V.(1990). “Modelling, control, and design of flexible structures: a survey.”Appl. Mech. Rev., 43(5), 99.
166.
Robertson, S. R. (1984). “Seismic analysis of a spaceframe.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 430–435.
167.
Rodellar, J., Chung, L., Soong, T., and Reinhorn, A.(1989). “Experimental digital control of structures.”J. Engrg. Mech., ASCE, 115(6), 1245–1261.
168.
Rodellar, J., Reinhorn, A., and Soong, T. (1991). “Input-output discrete time control of structures.”Mechanics computing in 1990s and beyond, H. Adeli and R. Sierakowski, eds., ASCE, New York, N.Y., 771–775.
169.
Rozvany, G. I. N., and Wang, C.-M.(1984). “Optimal layout theory: allowance for selfweight.”J. Engrg. Mech., ASCE, 110(1), 66–83.
170.
Rubin, S.(1980). “Ambient vibration survey of offshore platform.”J. Engrg. Mech. Div., ASCE, 106(3), 425–441.
171.
Sae-Ung, S., and Yao, J.(1978). “Action control of building structures.”J. Engrg. Mech., ASCE, 104(2), 335–350.
172.
Saka, M. P. (1984). “Optimum design of space trusses with buckling constraints.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 656–660.
173.
Saka, M. P.(1991). “Optimum design of geometrically nonlinear elasto-plastic steel frames.”Comp. and Struct., 38(3), 329–344.
174.
Salajegheh, E. (1984). “Optimum design of double-layer grids.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., 661–668.
175.
Salajegheh, E. (1993). “Efficient optimum design of structures.”Space structures-4, G. Parke and C. Howard, eds., Vol. 2, Thomas Telford, London, England, 1735–1745.
176.
Salmon, C. G., and Johnson, J. E. (1990). Steel structures—design and behavior, 3rd Ed., Harper and Row, Publishers, Inc., New York, N.Y., 63–64.
177.
Sankar, B., and Deshpande, A.(1993). “Passive damping of large space structures.”AIAA J., 31(8), 1511–1516.
178.
Saran, M., and Kleiber, M.(1986/87). “Experience with nonlinear analysis of trusses under static and dynamic loadings.”Space Struct., 2, 205–214.
179.
Schmidt, L., and Hanaor, A.(1979). “Force limiting devices in space structures.”J. Struct. Div., ASCE, 105(5), 939–951.
180.
Schmidt, L. C., Morgan, P. R., and Clarkson, J. A.(1976). “Space trusses with brittle type strut buckling.”J. Structural Div., ASCE, 102(7), 1479–1492.
181.
Schun, J., and Tesar, A. (1984). “Dynamic stability of space structures.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 446–451.
182.
Sherman, D. R.(1972). “Bibliography on latticed structures.”J. Struct. Div., ASCE, 98(7), 1545–1566.
183.
Sherman, D. R.(1976). “Lattice structures: state-of-the-art report.”J. Struct. Div., ASCE, 102(11), 2197–2230.
184.
Shih, C.-F.(1987). “Verification of large beam-type space structures.”J. Spacecraft and Rockets, 24(5), 469–473.
185.
Shinozuka, M., Yun, C.-B., and Imai, H.(1982). “Identification of linear structural dynamic systems.”J. Engrg. Mech., ASCE, 108(6), 1371–1380.
186.
Smith, E. A. (1984). “Ductility in double layer grid space structures.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 510–515.
187.
Smith, J. (1988). Vibration of structures—applications in civil engineering design . Chapman and Hall, New York, N.Y.
188.
Smith, E. A., and Epstein, H.(1980). “Hartford Coliseum roof collapse: structural sequence and lesson learned.”Civ. Engrg., ASCE, 52(4), 59–62.
189.
Sniady, P., and Zukowski, S. (1993). “The reliability and sensitivity of space truss structures under time-variable loads.”Space structures-4, G. A. R. Parke and C. M. Howard, eds., Vol. 1., Thomas Telford, London, England, 442–451.
190.
Soare, M. (1975). “Contribution to the analysis of double-layer mesh grids.”Proc., 2nd Int. Conf. on Space Struct., W. J. Supple, ed., Billing & Sons, Ltd., London, England, 159–163.
191.
Soong, T., and Manopolis, G.(1988). “Active structures.”J. Struct. Engrg., ASCE, 113, 2290–2302.
192.
Soong, T., and Yang, J.(1988). “Recent advances in active control of civil engineering structures.”Probabilistic Engrg. Mech., 3(4), 179–188.
193.
Spillers, W., and Levy, R.(1984). “Truss design: two loading conditions with prestress.”J. Struct. Engrg., ASCE, 110(4), 677–687.
194.
Stephans, J., and Yao, J.(1987). “Damage assessment using response measurements.”J. Struct. Engrg., ASCE, 113(4), 787–801.
195.
Sun, C., and Wang, R. (1993). “Damping augmentation by delayed actuation in adaptive structures.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., April, 3297–3304.
196.
Sun, C. T., and Yang, T. Y.(1973). “A continuum approach toward dynamics of gridworks.”J. Appl. Mech., 40, 186–192.
197.
Sun, C., Kim, B., and Bogdanoff (1981). “On the derivation of equivalent simple models for beamand plate-like structures in dynamic analysis.”Proc., AIAA Dynamics Specialists Conf., 523–532.
198.
Supple, W. J., and Collins, (1981). “Limit state analysis of double-layer grids.”Analysis, design and construction of double layer grids, Z. S. Makowski, ed., Applied Science Publishers, London, England, 93–117.
199.
Suto, F., Wada, A., and Sugihara, K.(1988). “Some aspects of reliability and safety of space frames.”Int. J. Space Struct., 3(4), 197–216.
200.
Tabatabaei, M., and Marsh, C.(1993). “`Strengthening space trusses by diagonal removal.”Int. J. Space Struct., 8(4), 21–26.
201.
Thornton, C., and Lew, I. (1984). “Investigation of the causes of Hartford coliseum collapse.”Proc., 3rd Int. Conf. on Space Struct., H. Nooshin, ed., Elsevier Applied Science, London, England, 636–640.
202.
Tomlinson, G.(1990). “The use of constrained layer damping in vibration control.”Int. J. Mech. Sci., 32(3), 233–242.
203.
Tsuboi, Y. (1984). “Analysis, design and realization of space frames: a state-of-the-art report.”Bull. Int. Assn. of Shell and Spatial Struct., Madrid, Spain, n. 84/85. Vol. XXV-1/2, 1984.
204.
Tsutsumi, K.(1988). “Neural control of 3-dimensional truss structure.”Neural Network, 1(1), 364.
205.
Tsou, P., and Shen, M.-H.(1994). “Structural damage detection and identification using neural networks.”AIAA J., 32(1), 176–183.
206.
Uniform building code, structural engineering design provisions. (1994). Vol. 2, International Conference of Building Officials, Whittier, Calif.
207.
Utku, S., and Wada, B. (1993). “Vibration control in statistically indeterminate adaptive truss structures.”Proc., 34th Struct., Struct. Dynamics, and Mat. Conf., Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 3289–3296.
208.
Van Moorleghem, W. (1993). “The use of shape memory alloys in space structures, either as an actuator or as a passive damping element.”Space structures-4, G. Parke and C. Howard, ed., Vol. 1, Thomas Telford, London, England, 833–842.
209.
Wada, A., and Wang, Z.(1992). “Influence of uncertainties on mechanical behavior of a double-layer space truss.”Int. J. of Space Struct., 7(3), 223–235.
210.
Wada, B., Utku, S., and Das, S. (1991). “Application of adaptive structures for the control of truss structures.”Proc., 2nd Joint Japan/U.S. Conf. on Adaptive Struct., Y. Matsuzaki and B. Wada, eds., Technomic Publ. Co., Lancaster, Pa., 123–131.
211.
Wang, B. (1994). “Linear dynamic response of truss structures during sudden member failure,” MS thesis, Dept. of Civ. Engrg., Univ. of Connecticut, Storrs, Conn.
212.
Weaver, W., and Johnston, P. (1987). Structural dynamics by finite elements, Prentice-Hall, Inc., Englewood Cliffs, N.J.
213.
Weaver, W. Jr., and Loh, C. L.(1985). “Dynamics of trusses by component-mode method.”J. Struct. Engrg., ASCE, 111(12), 2565–2575.
214.
Weaver, W., Timoshenko, S., and Young, D. (1990). Vibration problems in engineering . 5th Ed., John Wiley & Sons, Inc., New York, N.Y.
215.
Wu, C., and Arora, J.(1987). “Design sensitivity analysis of nonlinear response using incremental procedure.”AIAA J., 25(8), 1118–1125.
216.
Xingsi, L., and Templeman, A. B.(1988). “Entropy-based optimum sizing of trusses.”Civ. Engrg. Sys., 5(3), 121–128.
217.
Yang, J.-N., and Giannopoulos, F.(1978). “Active tendon control of structures.”J. Engrg. Mech., ASCE, 104(3), 551–568.
218.
Yao, J.(1972). “Concept of structural control.”J. Struct. Div., ASCE, 98(7), 1569–1570.
219.
Yong, Y., and Lin, Y. K.(1990). “Dynamics of complex truss-type space structures.”AIAA J., 28(7), 1250–1258.
220.
You, S., and Pellegrino, S. (1994). “Deployable mesh reflector.”Spatial, lattice, and tension structures, J. Abel, W. Leonard, and C. Penalba, eds., ASCE, New York, N. Y., 103–112.
221.
Zhou, M., and Xia, R.(1990). “An efficient method of truss design for optimum geometry.”Comp. and Struct., 35(2), 115–119.
222.
Zienkiewicz, O. C. (1977). The finite element method, 3rd Ed., McGraw-Hill Book Co., Inc., New York, N.Y.
223.
Zingoni, A., Pavlovic, M., Lloyd-Smith, D., and Zlokovic, G. (1993). “Application of group theory to the analysis of space frames.”Space structures-4, G. A. R. Parke and C. M. Howard, eds., Vol. 2, Thomas Telford, London, England, 1334–1347.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 122 • Issue 8 • August 1996
Pages: 882 - 892
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Aug 1, 1996
Published in print: Aug 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.