Fatigue-Load Models for Girder Bridges
Publication: Journal of Structural Engineering
Volume 122, Issue 7
Abstract
A fatigue-live-load model is developed for steel girder bridges. The database for the model is obtained by weigh-in-motion (WIM) measurements. Five bridge structures were selected for testing to determine the site-specific truck parameters and component-specific stress spectrum. The database includes 22,000 truck files, each consisting of gross vehicle weight (GVW), axle weights, and axle spacing. Stress cycles were measured at the midspan of all bridge girders and results are presented as cumulative distribution functions. The WIM measurements confirm that truck loads are strongly site-specific. The results also indicate a significant variation in stress spectrum between girders. A three-axle truck is proposed to represent the truck traffic. For sites with 10and 11-axle trucks, an additional four-axle truck is proposed. The developed fatigue live load model is verified using fatigue-damage analysis to compare the model with measured results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bannatine, J. A., Comer, J. J., and Handrock, J. L. (1990). Fundamentals of metal fatigue analysis. Prentice-Hall, Inc., Englewood Cliffs, N.J.
2.
Benjamin, J. R., and Cornell, C. A. (1970). Probability, statistics and decision for civil engineers. McGraw-Hill Book Co., Inc., New York, N.Y.
3.
Fisher, J. W. (1977). Bridge fatigue guide—design and details, Publ. No. T112-11/77, Am. Inst. of Steel Constr., Chicago, Ill.
4.
Gagarine, N., and Albrecht, P. (1992). “Predicting fatigue life of highway bridges with weigh-in-motion data.”3rd Int. Workshop on Bridge Rehabilitation, Darmstadt, Germany, June 1992, 679–693.
5.
Guide specifications for fatigue design of steel bridges. (1989). Am. Assoc. of State Hwy. and Transp. Officials (AASHTO), Washington, D.C.
6.
Khaleel, M. A., and Anditani, R. Y. (1993). “Effect of alternative truck configurations and weights on the fatigue life of bridges.”Transp. Res. Rec. No. 1393, Transp. Res. Board, Washington, D.C.
7.
Laman, J. A. (1995). “Fatigue load models for girder bridges,” PhD dissertation, Univ. of Michigan at Ann Arbor, Mich.
8.
LRFD bridge design specifications. (1994). Am. Assoc. of State Hwy. and Transp. Officials (AASHTO), Washington, D.C.
9.
Raju, S. K., Moses, F., and Schilling, C. G.(1990). “Reliability calibration of fatigue evaluation and design procedures.”J. Struct. Engrg., ASCE, 116(5), 1356–1369.
10.
Schilling, C. G.(1984). “Stress cycles for fatigue design of steel bridges.”J. Struct. Engrg., ASCE, 110(6), 1222–1234.
11.
Tallin, A. G., and Petreshock, T. (1990). “Modeling fatigue loads for steel bridges.”Transp. Res. Rec. 1275, Washington, D.C.
12.
Zwerneman, F. J., and Frank, K. H.(1988). “Fatigue damage under variable amplitude loads.”J. Struct. Engrg., ASCE, 114(1), 67–83.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jul 1, 1996
Published in print: Jul 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.