Shear Strength of Beams with Corrugated Webs
Publication: Journal of Structural Engineering
Volume 122, Issue 4
Abstract
Beams with corrugated webs were tested to failure under shear; the failure was due to buckling of the web. The test specimens were modeled using finite elements and the computer program ABAQUS was used to perform nonlinear analysis; the load increment as well as the mesh size were selected based on studies to examine their effects. The comparison between the results from the finite-element anaylsis and the tests was satisfactory. The average ratio between the analytical and experimental buckling loads was calculated to be 1.15. The primary reason why the analytical results are higher is the presence of unavoidable imperfections in the webs of the test specimens. Finite-element models with seeded imperfections gave results very close to those obtained from the tests. It was noted from the experimental as well as the analytical results that buckling of the web is local and global for the coarse and dense corrugations, respectively. Buckling formulas are suggested, which are based on local buckling of the corrugation folds as isotropic flat plates or global buckling of the entire web panel as an orthotropic plate. Comparisons between the results from the formulas, the finite-element analysis, and the tests are given and shown to be satisfactory.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS ( Version 5.2). (1992). Hibbitt, Karlson & Sorensen, Inc., Pawtucket, R.I.
2.
Bergfelt, A., and Leiva-Aravena, L. (1984). “Shear buckling of trapezoidally corrugated girder webs.”Rep. No. S 84:2, Dept. of Struct. Engrg., Chalmers Univ. of Technol., Göteborg, Sweden.
3.
Combault, J. (1988). “The Maupre viaduct near Charolles, France,”Proc., AISC Engrg. Conf., Am. Inst. of Steel Constr. (AISC), Inc., Chicago, Ill., 12.1–12.22.
4.
Easley, J. T.(1975). “Buckling formulas for corrugated metal shear diaphragms.”J. Struct. Div., ASCE, 101(7), 1403–1417.
5.
Elgaaly, M., and Dagher, H. (1990). “Beams and girders with corrugated webs.”Proc., Annu. Tech. Session, Structural Stability Res. Council (SSRC), Lehigh Univ., Bethlehem, Pa., 37–53.
6.
Elgaaly, M., Smith, D., Hamilton, R. (1992). “Beams and girders with corrugated webs.”Proc., 1992 NSF Struct., Geomechanics and Build. Systems Grantees' Conf., Coll. of Engrg., Univ. of Puerto Rico, Mayaguez, Puerto Rico, 126–128.
7.
Galambos, T. V. (ed.). (1988). Guide to stability design criteria for metal structures. John Wiley & Sons, Inc., New York, N.Y.
8.
Hamada, M., Nakayama, K., Kakihara, M., Saloh, K., and Ohtake, F. (1984). “Development of welded I-beam with corrugated web.”The Sumitomo Search, Tokyo, Japan, No. 29, 75–90.
9.
Hamilton, R. (1993). “Behavior of welded girders with corrugated webs,” PhD thesis, Dept. of Civ. Engrg., Univ. of Maine, Orono, Maine.
10.
Harrison, J. D.(1965). “Exploratory fatigue tests of two girders with corrugated webs.”British Welding J., London, England, 12(3), 121–125.
11.
Heywood, P. (1987). “Corrugated box-girder web lowers bridge weight and cost.”ENR, (Dec.), 32.
12.
Hussain, M. I., and Libove, C. (1977). “Stiffness tests of trapezoidal corrugated shear webs.”J. Struct. Div., ASCE, (5), 971–987.
13.
Korashy, M., and Varga, J. (1979). “Comparative Evaluation of fatigue strength of beams with web plate stiffened in the traditional way and by corrugation.”Acta Technica Academiae Scientiarum Hungaricae, Budapest, Hungary, 309–346.
14.
Libove, C. (1973). “On the stiffness, stress, and buckling of corrugated shear webs.”Proc., 2nd Spec. Conf. on Cold-Formed Steel Struct., Univ. of Missouri-Rolla, Rolla, Mo., 259–301.
15.
Libove, C. (1977). “Buckling of corrugated plates in shear.”Proc., Int. Colloquium on Struct. Stability, Struct. Stability Res. Council, Lehigh University, Bethlehem, Pa., 435–462.
16.
Lindner, J., and Aschinger, R. (1988). “Grenzchubtragfähigkeit von I-Trägern mit Trapezförmig Proilierten Stegen.”Stahlbau 57, Germany, 377–380 (in German).
17.
Peterson, J. M., and Cord, M. E. (1960). “Investigation of the buckling strength of corrugated webs in shear.”NASA Tech. Note D-424, Nat. Aeronautics and Space Admin. (NASA), Washington, D.C.
18.
Rothwell, A. (1968). “The shear stiffness of flat sided corrugated webs.”Aeronautical Quarterly, Vol. 19, Part 3, 224–234.
19.
Scheer, J., Pasternak, H., Plumeyer, K., Ruga, J., and Einsiedler, O. (1991). “Trapezstegräger Geschweibt.”Rep. No. 6203, Institut für Stahlbau, TU Braunschweig, Germany (in German).
20.
Sherman, D., and Fisher, J. (1971). “Beams with corrugated webs.”Proc., 1st Spec. Conf. on Cold-Formed Steel Struct., Univ. of Missouri-Rolla, Rolla, Mo., 198–204.
21.
Smith, D. (1992). “Behavior of corrugated plates subjected to shear.” MSc thesis, Dept. of Civ. Engrg., Univ. of Maine, Orono, Maine.
22.
Wu, L. H., and Libove, C.(1975). “Curvilinearly corrugated plates in shear.”J. Struct. Div., ASCE, 101(11), 2205–2222.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Apr 1, 1996
Published in print: Apr 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.