Solution for the Design of Reinforced Concrete Plates and Shells
Publication: Journal of Structural Engineering
Volume 121, Issue 5
Abstract
The use of finite-element packages by practioners as a design tool for reinforced concrete structures has increased considerably in the last few decades. All structural codes of practice recognize the assumption of linear elastic behavior at a design stage. However, the problem remains of calculating the required reinforcement in plates and shells. The amount of reinforcement is determined locally, i.e., for each sampling point, from the equilibrium between applied and internal forces. The formulation of the method includes biaxial behavior of concrete and different lever arms for all the internal forces. Ideal plastic behavior is assumed for both materials. A reference is made to the absence of universally accepted solutions for the design of these structures and, therefore, scarcity of provisions in the structural concrete codes. To appraise the validity of the method, a comparison is made with experimental tests on slab and shell elements. Additional numerical results for practical structures are also given.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baumann, T. (1972). “On the question of multi-directional reinforcement of plate and shell structures.”Der Bauingenieur, Heidelberg, Germany, 97(10) (in German).
2.
Braestrup, M. W., and Nielsen, M. P. (1983). “Plastic methods of analysis and design.”Handbook of structural concrete, Pitman Advanced Publishing Program, 20.1–20.54.
3.
“Building code requirements for reinforced concrete and commentary.” (1989). ACI 318-89/ACI 318R-89, Am. Concr. Inst., Detroit, Mich.
4.
“CEB-FIP model code 1990.” (1993). Bulletin d'Information N° 213/214, Comité Euro-International du Béton, Lausanne, Switzerland.
5.
“Design of concrete structures for buildings.” (1984). CAN 3-A23.3-M84, Can. Standards Assoc., Rexdale, Ontario.
6.
Eibl, J. (1991). “Safety considerations for non-linear analysis.”IABSE, 62, Stuttgart, Germany, 337–342.
7.
“Design of concrete structures (part 1).” (1991). European Prestandard, ENV 1992-1-1, Eurocode 2 .
8.
Figueiras, J. A., Cachim, P. B., Lourenço, P. J. B., and Póvoas, R. H. C. F. (1994). A consistent procedure for the design of concrete shell structures . EURO-C, Innsbruck, Austria.
9.
Figueiras, J. A., Póvoas, R. H. C., and Genésio, M. L. (1990). “Aplicação de modelos não lineares à análise e dimensionamento de estruturas laminares de betão.”IX Congresso Ibero Latino Americano sobre Mét. Comp. em Eng., COPPE-UFRJ, Rio de Janeiro, Brazil (in Portuguese).
10.
Gupta, A. K.(1986). “Combined membrane and flexural reinforcement in plates and shells.”J. Struct. Engrg., ASCE, 112(3), 550–557.
11.
Gupta, A. K., and Sen, S.(1977). “Design of flexural reinforcement in concrete slabs.”J. Struct. Div., ASCE, 103(4), 793–804.
12.
Kirscher, U., and Collins, M. P. (1986). “Investigating the behavior of reinforced concrete shell elements.”Pub. 86-09, Dept. Civ. Engrg., Univ. of Toronto, Toronto, Ontario.
13.
Kollegger, J. (1991). “Computer programms for consistent design of surface structures.”IABSE, 62, Stuttgart, Germany, 507–512.
14.
Lenschow, R. J., and Sozen, M. A.(1967). “A yield criterion for reinforced concrete slabs.”ACI, 64(5), 266–273.
15.
Lourenço, P. B. (1992). New methodologies for the design of concrete structures. Univ. of Minho, Guimarães, Portugal (in Portuguese).
16.
Lourenço, P. B., and Figueiras, J. A.(1993). “Automatic design of reinforcement in concrete plates and shells.”Engrg. Computations, 10(6), 519–541.
17.
Marti, P., and Kong, K.(1987). “Response of reinforced concrete slabs elements to torsion.”J. Struct. Engrg., ASCE, 113(5), 976–993.
18.
Marti, P. (1991). “Dimensioning and detailing.”IABSE, 62, Stuttgart, Germany, 411–443.
19.
Marti, M., Leesti, P., and Khalifa, W. U.(1987). “Torsion tests on reinforced concrete slab elements.”J. Struct. Engrg., ASCE, 113(5), 994–1010.
20.
Nielsen, M. P. (1964). Limit analysis of reinforced concrete slabs. Acta Polytechnica Scandinavica, Ci 26, Copenhagen, Denmark.
21.
Nielsen, M. P. (1964). “Yield conditions for reinforced concrete shells in the membrane state.”Non-classical shell problems, North-Holland, Amsterdam, The Netherlands, 1030–1040.
22.
Nielsen, M. P. (1971). On the strength of reinforced concrete disks. Acta Polytechnica Scandinavica, Civ. Engrg. Bldg. Constr. Service, Copenhagen, Denmark.
23.
Thürlimann, B. (1979). “Plastic analysis of reinforced concrete beams.”IABSE, 28, Copenhagen, Denmark, 71–90.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: May 1, 1995
Published in print: May 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.