Laminating Effects in Glued-Laminated Timber Beams
Publication: Journal of Structural Engineering
Volume 121, Issue 12
Abstract
Existing lamination and beam test results were analytically reviewed to quantify the laminating effect for European and North American glued-laminated (glulam) timber. The laminating effect is defined as the increase in strength of lumber laminations when bonded in a glulam beam compared with their strength when tested by standard test procedures. Fundamental concepts are presented to define the laminating effect, estimates are made of its magnitude, and relationships are presented to describe its character. Our review of experimental data indicated that the laminating effect ranged from 1.06 to 1.59 for European glulam and from 0.95 to 2.51 for North American glulam.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Institute of Timber Construction (AITC). (1991). “Use of a volume effect factor in the design of glued laminated timber beams.”Tech. Note No. 21, Englewood, Colo.
2.
American Institute of Timber Construction (AITC). (1993). “Glued laminated timber design values/specifications.”AITC 117-93, Englewood, Colo.
3.
Burk, A. G., and Bender, D. A.(1989). “Simulating finger-joint performance based on localized constituent lumber properties.”Forest Products J., 39(3), 45–50.
4.
Colling, F. (1988). “Estimation of the effect of different grading criterions on the bending strength of glulam beams using the `Karlsruhe calculation model.”' Proc., Int. Union of Forest Res. Org., Group S5.2, Tech. Univ. of Denmark, Lyngby, Denmark.
5.
Colling, F. (1990a). “Tragfähigkeit von Biegeträgern aus Brettschichtholz in Abhängigkeit von den festigkeitsrelevanten Einflußgrößen,” PhD dissertation, Univ. of Karlsruhe, Germany.
6.
Colling, F. (1990b). “Bending strength of glulam beams—a statistical model.”Proc., Int. Union of Forest Res. Org., Group S5.2, Tech. Univ. of Denmark, Lyngby, Denmark.
7.
Colling, F., and Falk, R. H. (1993). “Investigation of laminating effects in glued-laminated timber.”Proc., Meeting 24, Int. Council for Build. Res. Studies and Documentation Working Commission W-18, Dept. of Timber Struct., Univ. of Karlsruhe, Karlsruhe, Germany.
8.
Colling, F., Ehlbeck, J., and Görlacher, R. (1991). “Glued laminated timber: contribution to the determination of the bending strength of glulam beams.”Proc., Meeting 24, Int. Council for Build. Res. Studies and Documentation Working Commission W-18, Dept. of Timber Struct., Univ. of Karlsruhe, Karlsruhe, Germany.
9.
Comite European de Normalisation. (1993). “Timber structures—glued laminated timber—strength classes and determination of characteristic values.”Standard No. prEN 1194, Central Secretariat, Brussels, Belgium.
10.
Ehlbeck, J., Colling, F., and Görlacher, R. (1985). “Einfluß keilgezinkter Lamellen auf die Biegefestigkeit von Brettschichtholzträgern.”Holz als Roh- und Werkstoff, Vol. 43, 333–337.
11.
Falk, R. H., Solli, K. H., and Aasheim, E. (1992). “The performance of glued laminated beams manufactured from machine stress graded Norwegian Spruce.”Rep. No. 77, Norwegian Inst. of Wood Technol., Oslo, Norway.
12.
Foschi, R. O., and Barrett, J. D.(1980). “Glued-laminated beam strength: a model.”J. Struct. Div., ASCE, 106(8), 1735–1754.
13.
Gehri, E. (1992). “Determination of characteristic bending values of glued laminated timber.”Proc., Meeting 25, Int. Council for Build. Res. Studies and Documentation Working Commission W-18, Dept. of Timber Struc., Univ. of Karlsruhe, Karlsruhe, Germany.
14.
Görlacher, R. (1990). “Klassifizierung von Brettschichtholzlamellen durch Messung von Longitudinalschwingungen,” PhD dissertation, Dept. of Timber Struct., Univ. of Karlsruhe, Germany.
15.
Hernandez, R., Bender, D. A., Richburg, B. A., and Kline, K. S.(1992). “Probabilistic modeling of glued-laminated timber beams.”Wood Fiber Sci., 24(3), 294–306.
16.
International Standards Organization (ISO). (1985). “Solid timber in structural sizes: determination of some physical and mechanical properties.”ISO 8375, Geneva, Switzerland.
17.
Larsen, H. J. (1982). “Strength of glued laminated beams.”Rep. No. 8201; Part 5, Inst. of Build. Technol. and Struct. Engrg., Aalborg Univ., Aalborg, Denmark.
18.
Marx, C. M., and Evans, J. W.(1986). “Tensile strength of AITC 302-24 grade tension laminations.”Forest Products J., 36(1), 13–19.
19.
Marx, C. M., and Evans, J. W.(1988). “Tensile strength of laminating grades of lumber.”Forest Products J., 38(7/8), 6–14.
20.
Marx, C. M., and Moody, R. C. (1981). “Bending strength of shallow glued laminated beams of a uniform grade.”Res. Paper FPL 380, U.S. Dept. of Agr., Forest Service, Forest Products Lab., Madison, Wis.
21.
Moody, R. C., Falk, R. H., and Williamson, T. (1990). “Strength of glulam beams—volume effects.”Proc., 1990 Int. Timber Engrg. Conf., Vol. 1, 176–182.
22.
Rammer, D. R., and Soltis, L. A. (1994). “Experimental shear strength of glued-laminated beams.”Res. Paper FPL 527, U.S. Dept. of Agr., Forest Service, Forest Products Lab., Madison, Wis.
23.
Standard test methods of static tests of timbers in structural sizes; ASTM D198. (1984). ASTM, Philadelphia, Pa.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Dec 1, 1995
Published in print: Dec 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.