Fatigue-Based Methodology for Managing Impact of Heavy-Permit Trucks on Steel Highway Bridges
Publication: Journal of Structural Engineering
Volume 121, Issue 11
Abstract
Currently, in many areas of North America, special permits are issued to extra heavy vehicles without a detailed evaluation of individual components, considering only the ultimate capacity of the bridge inventory as a whole. Based on this, a large number of special permits have been issued to extra heavy vehicles. In this perspective, the ultimate and cumulative effect of such overloads on steel bridge components is studied. It is found that steel bridge members have adequate ultimate capacity to accommodate such overloads; however, they may suffer fatigue damage due to the cumulative effect of these overloads. Accordingly, a fatigue-based methodology is developed to assess the reduction in service life of bridges due to heavy-permit trucks. It is found that a reasonably large number of special permits can be issued at small reductions in fatigue life, but because stress ranges in excess of the constant-amplitude fatigue limit significantly alter the shape of the S - N curve, it is essential to appreciate that the concept of infinite fatigue life cannot be relied upon anymore.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Agarwal, A. C. (1981). Guidelines No. 2 for special overweight permits . The Policy Planning and Res. Div., Ontario Ministry of Transp. and Communications, Downsview, Ontario, Canada.
2.
Agarwal, A. C., and Wolkowicz, M. (1976). “Interim report on Ontario commercial vehicle survey 1975.”Rep., Engrg. Res. and Devel. Branch, Ministry of Transp. and Communications, Downsview, Ontario, Canada.
3.
Albrecht, P., and Friedland, I. M.(1979). “Fatigue-limit effect on variable-amplitude fatigue of stiffeners.”J. Struct. Div., ASCE, 105(12), 2657–2673.
4.
American Assoc. of State Hwy. Transp. Officials (AASHTO). (1991). Standard specifications for highway bridges . Washington, D.C.
5.
Bakht, B., and Jeager, L. G. (1984). “A rational procedure for overweight permits.”TRR 950, Transp. Res. Board, Washington, D.C.
6.
Bakht, B., and Jeager, L. G. (1985). Bridge analysis simplified. McGraw-Hill, New York, N.Y.
7.
Batchelor, B., Hewitt, B. E., and Csagoly, P. (1978). “An investigation of the fatigue strength of deck slabs of composite steel/concrete bridges.”Transp. Res. Rec. 664, Transp. Res. Board (TRB), Washington, D.C., 153–161.
8.
Batchelor, B., and Hewitt, B. E. (1978). “An investigation of the ultimate strength of deck slabs of composite steel/concrete bridges.”Transp. Res. Rec. 664, Transp. Res. Board (TRB), Washington, D.C., 162–170.
9.
Bruneau, M., and Dicleli, M. (1994). “Cumulative effect of extreme permit loads on steel bridges.”Rep. SRR-93-05, Ontario Ministry of Transp., Downsview, Ontario, Canada.
10.
Davenport, A. G., and Harman, D. J. (1977). “Formulation of vehicular loading for the design of highway bridges.”Ontario Joint Transp. and Communications Res. Rep. L-4, Fac. of Engrg. Sci., Univ. of Western Ontario, London, Ontario, Canada.
11.
Fisher, J. W., and Mertz, D. R. (1983). “Steel bridge members under variable amplitude long life fatigue loading.”NCHRP Rep. 267, Transp. Res. Board, Washington, D.C.
12.
Fisher, J. W., Nussbaumer, A., Keating, P. B., and Yen, B. T. (1993). “Resistance of welded details under variable amplitude long-life fatigue loading.”NCHRP Rep. 354, Transp. Res. Board, Washington, D.C.
13.
Jaeger, L. G., and Bakht, B. (1989). Bridge analysis by microcomputer . McGraw-Hill, New York, N.Y.
14.
Miner, M. A. (1945). “Cumulative damage in fatigue.”J. Appl. Mech., Vol. 12.
15.
Moses, F., Schilling, C. G., and Raju, K. S. (1987). “Fatigue evaluation procedures for steel bridges.”NCHRP Rep. 299, Transp. Res. Board (TRB), Washington, D.C.
16.
Ontario highway bridge design code. (1983a). Hwy. Engrg. Div., Toronto, Ontario, Canada.
17.
Ontario highway bridge design code—commentary. (1983b). Hwy. Engrg. Div., Toronto, Ontario, Canada.
18.
Perdikaris, P. C., Beim, S. R., and Bousias, S. N. (1989). “Slab continuity effect on ultimate and fatigue strength of reinforced concrete bridge deck models.”ACI Struct. J., 86(4).
19.
Schilling, C. G., Klippstein, K. H., Barsom, J. M., and Blake, G. T. (1978). “Fatigue of welded bridge members under variable amplitude loadings.”NCHRP Rep. 188, Transp. Res. Board (TRB), Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Nov 1, 1995
Published in print: Nov 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.