Optimal Design of Structural Concrete Bridge Systems
Publication: Journal of Structural Engineering
Volume 120, Issue 9
Abstract
Superstructure design of short‐ and medium‐span highway bridge systems may be conceived as a process of multilevel and multiobjective optimization. Three optimization levels are identified: (1) Level 1—component optimization; (2) level 2—structural configuration optimization; and (3) level 3—overall system optimization. Designs may be optimized by separately or simultaneously considering one, two, or more of the following objectives: cost, prestressing steel or concrete consumption, and superstructure depth. The optimal solution may be found by a sequence of nonlinear programming and sieve‐search techniques. Levels 1 and 2 optimizations identify the best solutions for specific components (precast I‐girders, voided and solid slabs, single‐ and two‐cell box girders) and layouts (for precast I‐girder: one, two, and three; simple or continuous spans). Level 3 optimization selects the overall best system for given bridge lengths, widths, and traffic loadings. The present study results in: (1) A systematic procedure for bridge design; (2) a rational approach to optimization of standard precast sections; (3) direct design aids for selection of optimized bridge systems; and (4) simplified optimality criteria for preliminary design.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aguilar, R. J., Movassaghi, K., and Brewer, J. A. (1973). “Computerized optimization of bridge structures.” Comput. Struct., 3, 429–442.
2.
Bond, D. (1975). “An examination of the automated design of prestressed concrete bridge decks by computer.” Proc. Inst. Civ. Engrs., 59(2), 669–697.
3.
Bond, D. (1983). “Optimal design of continuous prestressed concrete bridges.” Proc. Int. Symp. on Nonlinearity and Continuity in Prestressed Concrete, M. Z. Cohn, ed., University of Waterloo, Waterloo, Ontario, Canada, 3, 201–234.
4.
Cohn, M. Z. (1992). “Theory and practice of structural optimization.” Proc. NATO‐ASI optimization of large‐scale systems. 2, G. Rozvany, ed., Kluwer Academic Publishers, Dordrecht, the Netherlands, 843–862.
5.
Cohn, M. Z., and Dinovitzer, A. (1993). “Applications of structural optimization.” J. Struct. Engrg., ASCE, 120(2), 617–650.
6.
Cohn, M. Z., and Mac Rae, A. J. (1984). “Prestressing optimization and design practice.” PCI J., 29(4), 68–83.
7.
CPCI metric design manual. (1987). Canadian Prestressed Concrete Institute, Ottawa, Ontario, Canada.
8.
Dunker, K. F., and Rabbat, B. G. (1992). “Performance of prestressed concrete highway bridges in the United States—the first 40 years.” PCI J., 36(3), 48–64.
9.
Heins, C. P., and Lawrie, R. A. (1984). Design of modern concrete highway bridges. J. Wiley and Sons, New York, N.Y.
10.
Kirsch, U. (1973). “Optimum design of prestressed plates.” J. Struct. Div., ASCE, 99(6), 1075–1090.
11.
Lounis, Z. (1993). “Multilevel and multiobjective optimization of prestressed concrete bridge superstructure systems,” PhD thesis, Dept. of Civil Engineering, University of Waterloo, Waterloo, Ontario, Canada.
12.
Lounis, Z., and Cohn, M. Z. (1993a). “Optimization of precast prestressed concrete bridge girder systems.” PCI J., 38(4), 60–78.
13.
Lounis, Z., and Cohn, M. Z. (1993b). “Multiobjective optimization of prestressed concrete structures.” J. Struct. Engrg., ASCE, 119(3), 794–808.
14.
Mafi, M., and West, H. H. (1986). “Cost‐effective short span bridge systems: a selection concept and an optimization procedure.” Proc. 2nd Int. Conf. on Short and Medium Span Bridges, Canadian Society of Civil Engineers, Ottawa, Canada, 2, 117–131.
15.
Menn, C. (1990). Prestressed concrete bridges. Birkhäuser Verlag, Zurich, Switzerland.
16.
Naaman, A. E. (1972). “Computer program for selection and design of simple‐span prestressed concrete highway girders.” PCI J., 17(1), 73–81.
17.
Ontario highway bridge design code (and commentary). (1983). 2nd Ed., Ministry of Transportation and Communications, Downsview, Ontario, Canada.
18.
Ontario highway bridge design code. (1992). 3rd Ed., Ministry of Transportation, Downsview, Ontario, Canada.
19.
Precast and prestressed concrete design handbook. (1985). 3rd Ed., Prestressed Concrete Inst., Chicago, Ill.
20.
Precast prestressed concrete short span bridges—spans to 100 feet. (1981). 2nd Ed., Prestressed Concrete Institute, Chicago, Ill.
21.
Rabbat, G. B., and Russell, H. G. (1982). “Optimized sections for pretensioned concrete bridge girders in the United States.” Proc. 1st Int. Conf. on Short and Medium Span Bridges, Canadian Society of Civil Engineers, Toronto, Canada, 2, 97–111.
22.
Standard specifications for highway bridges. (1989). 14th Ed., American Association of State Highway and Transportation Officials, Washington, D.C.
23.
Templeman, A. B., and Winterbottom, S. K. (1979). “Optimum design of concrete cellular spine beam bridge decks.” Proc., Inst. Civ. Engrs., 67(2), 389–409.
24.
Torres, G. G. B., Brotchie, J. F., and Cornell, C. A. (1966). “A program for the optimum design of prestressed concrete highway bridges.” PCI J., 11(1), 63–71.
25.
Wills, J. (1973). “A mathematical optimization procedure and its applications to the design of bridge structures.” Rep. No. LR 555, Transp. and Road Res. Lab., Crowtorne, England, 1–28.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Aug 16, 1993
Published online: Sep 1, 1994
Published in print: Sep 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.