Spread of Plasticity: Quasi‐Plastic‐Hinge Approach
Publication: Journal of Structural Engineering
Volume 120, Issue 8
Abstract
The paper describes a method of inelastic analysis for steel frames that provides the accuracy of distributed plasticity methods with the computational efficiency of elastic‐plastic‐hinge methods. It accounts for spread‐of‐plasticity effects without the need for through‐section and lengthwise discretization of a beam‐column element. This is accomplished through nonlinear equations for the force‐strain relationships of the cross section that are calibrated to data from inelastic analyses and numerical integration of the cross‐section model along the element length to obtain inelastic flexibility coefficients for the member. The flexibility coefficients are employed in generating an inelastic stiffness matrix in which geometric nonlinearity is also accounted for. The proposed model has been implemented and tested using several example problems known to be sensitive to spreading‐plasticity effects.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chen, W. F., and Atsuta, T. (1977). Theory of beam columns, Vol. 2: space behavior and design, McGraw‐Hill, New York, N.Y.
2.
Deierlein, G. G., Zhao, Y. T., and McGuire, W. (1991). “A two‐surface concentrated plasticity model for analysis of 3D framed structures.” Proc., 1991 Ann. Tech. Session: Inelastic Behavior and Design of Frames, Structural Stability Research Council (SSRC), Chicago, Ill.
3.
Duan, L., and Chen, W. F. (1990). “A yield surface equation for doubly symmetrical sections.” Eng. Struct., 12(2), 114–119.
4.
El‐Zanaty, M. H., Murray, D. W., and Bjorhovde, R. (1980). “Inelastic behavior of multistory steel frames.” Struct. Engrg. Rep. No. 83, Univ. of Alberta, Edmonton, Alberta, Canada.
5.
Hsieh, S. H., Deierlein, G. G., McGuire, W., and Abel, J. F. (1989). Technical manual for CU‐STAND. Cornell Univ., Ithaca, N.Y.
6.
Kanchanalai, T. (1977). “The design and behavior of beam‐columns in unbraced steel frames.” CESRL Report No. 77‐2, Univ. of Texas, Austin, Tex.
7.
Ketter, R. L., Kaminsky, E. L., and Beedle, L. S. (1955). “Plastic deformation of wide‐flange beam columns.” Trans., ASCE, 120, 1028–1069.
8.
King, W. S., White, D. W., and Chen, W. F. (1992). “Second‐order inelastic analysis methods for steel‐frame design.” J. Struct. Engrg., ASCE, 118(2), 408–428.
9.
Manual of steel construction, load and resistance factor design. (1986). American Inst. of Steel Constr. (AISC), Chicago, Ill.
10.
McGuire, W. (1991). “Refining the plastic hinge concept.” Proc., 1991 Ann. Tech. Session, SSRC, Chicago, Ill.
11.
McGuire, W., and Gallagher, R. H. (1979). Matrix structural analysis. John Wiley and Sons, Inc., New York, N.Y.
12.
Orbison, J. G., McGuire, W., and Abel, J. F. (1982). “Yield surface applications in nonlinear steel frame analysis.” Comp. Methods Appl. Mech. Engrg., 33(1), 557–573.
13.
Powell, G. H., and Chen, P. F. S. (1986). “3D beam‐column element with generalized plastic hinges.” J. Engrg. Mech., ASCE, 112(7), 627–641.
14.
Sanz‐Picon, C. F. (1992). “Behavior of composite column cross sections under biaxial bending,” MS thesis, Cornell Univ., Ithaca, N.Y.
15.
Vogel, U. (1985). “Calibrating frames.” Stahlbau, 54(10), 295–301.
16.
White, D. W. (1985). “Material and geometric nonlinear analysis of local planar behavior in steel frames using interactive computer graphics,” MS thesis, Cornell Univ., Ithaca, N.Y.
17.
White, D. W., Liew, J. Y. R., and Chen, W. F. (1993). “Toward advanced analysis in LRFD.” Plastic hinge based methods for advanced analysis and design of steel frames: an assessment of the state of the art, D. W. White and W. F. Chen, eds., SSRC, Bethlehem, Pa., 95–173.
18.
Yang, Y. B., and McGuire, W. (1986). “Stiffness matrix for geometric nonlinear analysis.” J. Struct. Engrg., ASCE, 112(4), 853–877.
19.
Ziemian, R. D., McGuire, W., and Deierlein, G. G. (1992a). “Inelastic limit states design: part I, planar frame studies.” J. Struct. Engrg., ASCE, 118(9), 2532–2549.
20.
Ziemian, R. D., McGuire, W., and Deierlein, G. G. (1992b). “Inelastic limit states design: Part II, Three‐dimensional frame study.” J. Struct. Engrg., ASCE, 118(9), 2550–2568.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jul 12, 1993
Published online: Aug 1, 1994
Published in print: Aug 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.