Discussion of “Simplified Strength Prediction for Cold‐Formed C‐ and Z‐Shapes” by R. A. LaBoube (June, 1993, Vol. 119, No. 6)
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 120, Issue 10
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cohen, J. M. (1987). “Local buckling behavior of plate elements,” PhD thesis, Cornell University, Ithaca, N.Y.
2.
Desmond, T. P. (1977). “The behavior and strength of thin‐walled compression elements with longitudinal stiffeners,” PhD thesis, Cornell University, Ithaca, N.Y.
3.
DeWolf, J. T. (1973). “Local and overall buckling of cold‐formed compression members,” PhD thesis, Cornell University, Ithaca, N.Y.
4.
He, B. K. (1981). “Experiments on Z‐purlins to explore effectiveness of sloping edge stiffeners.” Res. Report Memo, Dept. of Struct. Engrg., Cornell University, Ithaca, N.Y., Jan.
5.
Johnson, D. L. (1976). “Buckling of beam compression flanges.” AISI Rep., Butler Manufacturing Co., Kansas City, Mo., Nov.
6.
Kallsner, B. (1977). “Post‐buckling behaviour and load‐carrying capacity of thin‐walled box and hat‐specimen beams.” Rep. TVBK‐1001, Dept. of Struct. Engrg., Div. of Bldg. Tech., Lund Inst. of Tech., Lund, Sweden.
7.
Kalyanaraman, V. (1978). “Performance of unstiffened compression elements.” Rep. No. 362, Dept. of Struct. Engrg., School of Civ. and Envir. Engrg., Cornell Univ., Ithaca, N.Y., Feb.
8.
LaBoube, R. A. (1983). Z‐purlin edge stiffeners. Res. Ctr., Butler Manufacturing Co., Kansas City, Mo.
9.
LaBoube, R. A., and Yu, W. W. (1978). “Structural behavior of beam webs subjected to bending stress.” Webs for cold‐formed steel flexural members, Rep. 78‐1, Univ. of Missouri‐Rolla, Rolla, Mo., June.
10.
Lee, S., and Goel, S. C. (1987). “Seismic behavior of hollow and concrete‐filled square tubular bracing members.” Res. Rep. UMCE 87‐11, Dept. of Civ. Engrg., Univ. of Mich., Ann Arbor, Mich., Dec.
11.
Lee, H., and Goel, S. C. (1990). “Seismic behavior of steel built‐up box‐shaped bracing members and their use in stengthening reinforced concrete frames.” Res. Rep. UMCE 90‐7, Dept. of Civ. Engrg., Univ. of Michigan, Ann Arbor, Mich.
12.
Lim, B. S., and Rhodes, J. (1985). Buckling behavior of asymmetric edge stiffened plates. University of Strathclyde, Glasgow, Scotland.
13.
Load and resistance factor design specification for cold‐formed steel structural members. (1991). American Iron and Steel Institute, Washington, D.C.
14.
Loh, T. S. (1985). “Combined axial load and bending in cold‐formed steel members,” PhD Thesis, Cornell University, Ithaca, N.Y.
15.
Mulligan, G. P. (1983). “The influence of local buckling on the structural behavior of singly symmetric cold‐formed steel columns.” Rep. No. 83‐1, Dept. of Struct. Engrg., School of Civ. and Envir. Engrg., Cornell Univ., Ithaca, N.Y., Mar.
16.
Thomasson, P.O. (1978). “Thin‐walled C‐shaped panels in axial compression.” Document D1:1978, Swedish Council for Bldg. Res., Stockholm, Sweden.
17.
van Neste, A. J. (1983). “A practical method for the calculation of steel sheeting in bending.” Rep. THE‐BKO‐S‐81‐5, Dept. of Struct. Engrg., Technische Hogeschool Eindhoven, the Netherlands, Sep.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Published online: Oct 1, 1994
Published in print: Oct 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.