Interface Model Applied to Fracture of Masonry Structures
Publication: Journal of Structural Engineering
Volume 120, Issue 1
Abstract
The failure of unreinforced masonry structures subjected to lateral loads is dominated, to a large extent, by the fracture of mortar joints as well as the cracking and crushing of masonry units. This can be simulated by means of a finite element approach in which the mortar joints are modeled with interface elements and the masonry units are modeled with smeared crack elements. To this end, a dilatant interface constitutive model capable of simulating the initiation and propagation of interface fracture under combined normal and shear stresses in both tension‐shear and compression‐shear regions, and capable of simulating the experimentally observed dilatancy was developed in this study. The performance of the interface model in representing the behavior of masonry mortar joints is evaluated with the available experimental results. Furthermore, the failure of unreinforced concrete masonry panels is analyzed with the aforementioned approach. It is concluded that the numerical model is capable of predicting the response of a masonry assemblage based on the response of its basic constituents.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ali, S. S., and Page, A. W. (1988). “Finite element model for masonry subjected to concentrated loads.” J. Struct. Engrg., ASCE, 114(8), 1761–1784.
2.
Amadei, B., Sture, S., Saeb, S., and Atkinson, R. H. (1989). “An evaluation of masonry joint shear strength in existing buildings.” Rep., Dept. Civ., Envir., and Arch. Engrg., University of Colorado, Boulder, Colo.
3.
Anand, S. C., and Rahman, M. A. (1990). “Interface behavior in concrete block mortar joints—a comparison of analytical and experimental results.” Proc., 5th North Am. Masonry Conf., University of Illinois, Urbana‐Champaign, Ill., 475–486.
4.
Arya, S. K., and Hegemier, G. A. (1978). “On nonlinear response prediction of concrete masonry assemblies.” Proc., North Am. Masonry Conf., Masonry Society, Boulder, Colo., 19.1–19.24.
5.
Cundall, P. A. (1971). “A computer model for simulating progressive large‐scale movements in block rock systems.” Proc., Int. Symp. Rock Fracture, Nancy, France, II‐8.
6.
Dhanasekar, M., Kleeman, P. W., and Page, A. W. (1985). “Biaxial stress‐strain relations for brick masonry.” J. Struct. Engrg., ASCE, 111(5), 1085–1100.
7.
Goodman, R. E., Taylor, R. L., and Brekke, T. L. (1968). “A model for the mechanics of jointed rock.” J. Soil Mech. Found. Div., ASCE, 94(3), 637–659.
8.
Guo, P. (1991). “Investigation and modeling of the mechanical properties of masonry,” PhD thesis, McMaster University, Hamilton, Canada.
9.
Lotfi, H. R., and Shing, P. B. (1991). “An appraisal of smeared crack models for masonry shear wall analysis.” Computers and Struct., 41(3), 413–425.
10.
Lotfi, H. R. (1992). “Finite element analysis of fracture of concrete and masonry structures,” PhD thesis, University of Colorado, Boulder, Colo.
11.
Middleton, J., Pande, G. N., Liang, J. X., and Kralj, B. (1991). “Some recent advances in computer methods in structural masonry.” Computer methods in structural masonry, J. Middleton and G. N. Pande, eds., Books and Journals International, Swansea, U.K., 1–21.
12.
Ngo, D., and Scordelis, A. C. (1967). “Finite element analysis of reinforced concrete beams.” J. Am. Concrete Inst., 64(3), 152–163.
13.
Ortiz, M., and Popov, E. P. (1985). “Accuracy and stability of integration algorithms for elasto‐plastic constitutive relations.” Int. J. Num. Meth. Engrg., 21, 1561–1575.
14.
Page, A. W. (1978). “Finite element model for masonry.” J. Struct. Engrg., ASCE, 104(8), 1267–1285.
15.
Pande, G. N., Beer, G., and Williams, J. R. (1990). Numerical methods in rock mechanics. John Wiley and Sons Ltd., Chichester, England.
16.
Plesha, M. E., Ballarini, R., and Parulekar, A. (1989). “Constitutive model and finite element procedure for dilatant contact problems.” J. Engrg. Mech., ASCE, 115(12), 2649–2668.
17.
Prat, P. C., Carol, I., and Gettu, R. (1991). “Numerical analysis of mixed‐mode fracture of quasi‐brittle materials using a multicrack constitutive model.” Proc., Int. Conf. on Mixed‐Mode Fracture and Fatigue, Chapman and Hall, Austria.
18.
Rots, J. G. (1988). “Computational modeling of concrete fracture,” PhD thesis, Delft University of Technology, Delft, The Netherlands.
19.
Rots, J. G. (1991). “Numerical simulation of cracking in structural masonry.” HERON, 36(2), 49–63.
20.
Schellekens, J. C. J. (1990). “Interface elements in finite element analysis.” Rep. No. 25‐2‐90‐5‐17, Delft University of Technology, Delft, The Netherlands.
21.
Stankowski, T. (1990). “Numerical simulation of progressive failure in particle composites,” PhD thesis, University of Colorado, Boulder, Colo.
22.
Woodward, K., and Rankin, F. (1985). “Influence of block and mortar strength on shear resistance of concrete block masonry walls.” Rep. No. NBSIR 85‐3143, U.S. Department of Commerce, Gaithersburg, Md.
23.
Yamaguchi, E., and Chen, W. F. (1991). “Microcrack propagation study of concrete under compression.” J. Engrg. Mech., ASCE, 117(3), 653–673.
24.
Zubelewicz, A., and Bazant, Z. P. (1987). “Interface modeling of fracture in aggregate composites.” J. Engrg. Mech., ASCE, 113(11), 1619–1629.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Sep 8, 1992
Published online: Jan 1, 1994
Published in print: Jan 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.