Reliability Assessment of Prestressed Concrete Beams
Publication: Journal of Structural Engineering
Volume 120, Issue 1
Abstract
Second‐moment structural reliability analysis methods are used to assess the reliability levels implied by the current (1989) American Concrete Institute (ACI) code for 73 single‐span prestressed concrete beams commonly used in the construction industry for offices and retail buildings. The analysis is limited to only flexural load effects. Several limit states are considered, including permissible compressive and tensile stresses at both initial and final stages, flexural cracking, and ultimate strength. The loads, material and geometrical properties, prestressing force levels, and the models used to predict structural behavior at initial, final, and ultimate stages are all treated as random variables. The statistical parameters selected for these variables are believed to represent the present state of knowledge on uncertainties associated with prestressed concrete beams. The reliability levels are shown to be nonuniform over various ranges of live load levels, span lengths, and limit states. Information is also provided on the effects of secondary moments, cable eccentricities, and prestressing area on the reliability of a continuous three‐span prestressed concrete beam.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Harthy, A. S. (1992). “Reliability analysis and reliability based design of prestressed concrete structures,” PhD thesis, University of Colorado at Boulder, Boulder, Colo.
2.
Ang, A. H. S., and Tang, W. H. (1984). Probability concepts in engineering planning and design. Vol. II: Decision, risk, and reliability. John Wiley and Sons, New York, N.Y.
3.
Breitung, K. (1984). “Asymptotic approximations for multinormal integrals.” J. of Engrg. Mech., ASCE, 110(3), 357–366.
4.
“Building code requirement for minimum design loads in buildings and other structures.” (1982). ANSI A58.1‐1982, American National Standard Institute (ANSI), New York, N.Y.
5.
“Building code requirements for reinforced concrete.” (1989). ACI Standard 318‐89, American Concrete Institute (ACI), Detroit, Mich.
6.
CEB‐FIP model code for concrete structures. (1978). 3rd Ed., Comité Euro‐International du Béton/Fédération International de la Précontrainte (CEB‐FIP), Paris, France.
7.
Collins, M. P., and Mitchell, D. (1991). Prestressed concrete structures. Prentice Hall, Englewood Cliffs, N.J.
8.
Devalapura, R. K., and Tadros, M. K. (1992). “Critical assessment of ACI 318 eq. (18‐3) for prestressing steel stress at ultimate flexure.” ACI Struct. J., 89(5), 538–546.
9.
Ditlevsen, O. (1979). “Narrow reliability bounds for structural systems.” J. Struct. Mech., 7(4), 453–472.
10.
Ellingwood, B. R., and Culver, C. (1977). “Analysis of live load in office buildings.” J. Struct. Div., ASCE, 103(8), 1551–1560.
11.
Ellingwood, B., Galambos, T. V., MacGregor, J. G., and Cornell, C. A. (1980). “Development of a probability based load criterion for American National Standard A58.” NBS Spec. Publ. 577, National Bureau of Standards (NBS), Washington, D.C.
12.
Galambos, T. V., Ellingwood, B., MacGregor, J. G., and Cornell, C. A. (1982). “Probability based load criteria: assessment of current design practice.” J. Struct. Div., ASCE, 108(5), 959–977.
13.
Load and resistance factor design (LRFD) manual of steel construction. (1986), American Institute of Steel Construction (AISC), Chicago, Ill.
14.
MacGregor, J. G., Mirza, S. A., and Ellingwood, B. (1983). “Statistical analysis of resistance of reinforced and prestressed concrete members.” J. ACI, 80(3), 167–176.
15.
Melchers, R. E. (1987). Structural reliability analysis and prediction. Ellis Horwood Ltd., Chichester, England.
16.
Menegotto, M., and Pinto, P. E. (1973). “Method of analysis for cyclically loaded R.C. plane frames.” Preliminary Rep. for Symp. on Resistance and Ultimate Deformability of Structures Acted on by Well‐Defined Repeated Loads, IABSE, Lisbon, Portugal, 15–22.
17.
Mirza, S. A., Hatzinikolas, M., and MacGregor, J. G. (1979). “Statistical descriptions of strength of concrete.” J. Struct. Div., ASCE, 105(6), 1021–1037.
18.
Mirza, S. A., and MacGregor, J. G. (1979). “Variations in dimensions of reinforced concrete members.” J. Struct. Div., ASCE, 105(4), 751–765.
19.
Mirza, S. A., Kikuchi, D. K., and MacGregor, J. G. (1980). “Flexural strength reduction factor for bonded prestressed concrete beams.” J. ACI, 77(4), 237–246.
20.
Naaman, A. E. (1977). “Ultimate analysis of prestressed and partially prestressed sections by strain compatibility.” PCI J., 22(1), 32–51.
21.
Naaman, A. E. (1985). “Partially prestressed concrete: review and recommendations.” PCI J., 30(6), 30–71.
22.
Naaman, A. E., and Siriaksorn, A. (1982). “Reliability of partially prestressed concrete beams at serviceability limit states.” PCI J., 27(6), 66–85.
23.
Ontario highway bridge design code. (1991). Ministry of Transportation and Communication, Ontario, Canada.
24.
PROBAN. (1977). Users Manual by Lars Tvedt, A. S. Veritas Research, Høvik, Norway.
25.
Rackwitz, R., and Fiessler, B. (1978). “Structural reliability under combined random load sequences.” Computers and Struct., 9, 484–494.
26.
Shinozuka, M. (1983). “Basic analysis of structural safety.” J. Struct. Engrg., ASCE, 109(3), 721–740.
27.
Tvedt, L. (1988). “Second order reliability by an exact integral.” Proc., 2nd IFIP Working Conf. on Reliability and Optimization of Struct. Systems, P. Thoft‐Christensen, ed., Springler, Berlin, Germany, 377–384.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Dec 7, 1992
Published online: Jan 1, 1994
Published in print: Jan 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.