Impact Studies of Multigirder Concrete Bridges
Publication: Journal of Structural Engineering
Volume 119, Issue 8
Abstract
The impact behavior of multiple vehicles moving across rough bridge decks on seven multigirder concrete bridges with different span lengths is studied. The bridges are modeled as grillage beam systems. The vehicle is simulated as a nonlinear vehicle model with 12 degrees of freedom according to the HS20‐44 truck design loading in American Association of State Highway and Transportation Officials (AASHTO) specifications. Four classes of road‐surface roughness generated from the power‐spectral‐density function for the approach roadways and bridge decks are used in the analysis. The parametric analysis shows that the impact of exterior girders of short‐span bridges is highly sensitive to such factors as lateral loading position, vehicle weight, road roughness, number of loading lanes, and lateral stiffness. The maximum impact factors of girders were obtained for three trucks (side by side) through changing their transverse positions, with different speeds and road‐surface roughnesses. The results are useful for bridge design and further study of the impact formula proposed by the AASHTO specifications.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chan, T. H. T., and O'Connor, C. (1989). “Wheel loads from highway bridge strains: Field studies.” J. Struct. Engrg., ASCE, 116(7), 1751–1771.
2.
Chu, K. H., Garg, V. K., and Wang, T. L. (1986). “Impact in railway prestressed concrete bridges.” J. Struct. Engrg., ASCE, 112(5), 1036–1051.
3.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures. McGraw‐Hill Book Co., New York, N.Y.
4.
Dodds, C. J., and Robson, J. D. (1973). “The description of road surface roughness.” J. Sound and Vibration, 31(2), 175–183.
5.
Fenves, S. J., Veletsos, A. S., and Siess, C. P. (1962). “Dynamic studies of bridges on the AASHTO test road.” Report No. 71, National Academy of Sciences‐National Research Council, Washington, D.C.
6.
Green, R. (1977). “Dynamic response of bridge superstructures—Ontario observations.” Supplementary Report SR 275, Transp. and Road Res. Lab., Crowthorne, England, 40–48.
7.
Gupta, R. K., and Trail‐Nash, R. W. (1980). “Vehicle braking on highway bridges.” J. Engrg. Mech. Div., ASCE, 106(4), 641–657.
8.
Huang, T. (1960). “Dynamic response of three‐span continuous highway bridges,” PhD dissertation, University of Illinois, Urbana, Ill.
9.
Huang, D. Z., and Wang, T. L. (1992). “Impact analysis of cable‐stayed bridges.” J. Comput. and Struct., 43(5), 897–908.
10.
Huang, D. Z., Wang, T. L., and Shahaway, M. (1992). “Impact analysis of continuous multigirder bridges due to moving vehicles.” J. Struct. Engrg., ASCE, 118(2), 3427–3443.
11.
Hutton, S. G., and Cheung, Y. K. (1979). “Dynamic response of single highway bridges.” J. Earthquake Engrg., and Struct. Dyn., 7(6), 543–554.
12.
Hwang, E. S., and Nowak, A. S. (1991). “Simulation of dynamic load for bridges.” J. Struct. Engrg., ASCE, 117(5), 1413–1434.
13.
Leonard, D. R., Grainger, J. W., and Eyre, R. (1974). “Loads and vibrations caused by eight commercial vehicles with gross weights exceeding 32 tons.” Lab. Report LR52, Transp. and Road Res. Lab., Crowthorne, England.
14.
O'Connor, C., and Pritchard, R. W. (1985). “Impact studies on small composite girder bridge.” J. Struct. Engrg., ASCE, 111(3), 641–653.
15.
Ontario highway bridge design code. (1983). Ministry of Transp. and Communications, Toronto, Ontario.
16.
Oran, C. (1961). “Analysis of the static and dynamic response of single‐span multigirder highway bridges,” PhD dissertation, University of Illinois, Urbana, Ill.
17.
Page, J. (1976). “Dynamic wheel load measurements on motorway bridges.” Lab. Report LR 722, Transp. and Road Res. Lab., Crowthorne, England.
18.
Ruhl, J. (1974). “Stress histories for highway bridges subjected to traffic loading,” PhD dissertation, University of Illinois, Urbana, Ill.
19.
Shepherd, R., and Aves, R. J. (1973). “Impact factors of simple concrete bridges.” Proc., Institution of Civil Engineers, part 2, 55, 191–210.
20.
Standard plans for highway bridge superstructures. (1990). U.S. Dept. of Transp., Federal Highway Admin., Washington, D.C.
21.
Standard specifications for highway bridges. (1989). 14th Ed., Am. Assoc. of State Highway and Transp. Officials, Washington, D.C.
22.
Veletsos, A. S., and Huang, T. (1970). “Analysis of dynamic response of highway bridges.” J. Engrg. Mech. Div., ASCE, 90(5), 1648–1659.
23.
Wang, T. L. (1990). “Ramp/bridge interface in railway prestressed concrete bridges.” J. Struct. Engrg., ASCE, 116(6), 1648–1659.
24.
Wang, T. L., and Huang, D. Z. (1992a). “Cable‐stayed bridge vibration due to road surface roughness.” J. Struct. Engrg., ASCE, 118(5), 1354–1374.
25.
Wang, T. L., and Huang, D. Z. (1992b). “Computer modeling analysis in bridge evaluation.” Research Report No. FL/DOT/RMC/0542‐3394, Florida Dept. of Transp., Tallahassee, Fla.
26.
Wang, T. L., Garg, V. K., and Chu, K. H. (1991). “Railway bridge/vehicle interaction studies with a new vehicle model.” J. Struct. Engrg., ASCE, 117(7), 2099–2116.
27.
Wang, T. L., Huang, D. Z., and Shahawy, M. (1992c). “Dynamic response of multigirder bridges.” J. Struct. Engrg., ASCE, 118(8), 2222–2238.
28.
Wang, T. L., Shahawy, M., and Huang, D. Z. (1992d). “Impact in highway prestressed concrete bridges.” J. Comput. and Struct., 44(3), 525–534.
29.
Wood, J. H., and Shepherd, R. (1979). “Vehicle induced vibrations.” Bulletin No. 44, Road Res. Unit, Auckland, New Zealand, 21–20.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Apr 21, 1992
Published online: Aug 1, 1993
Published in print: Aug 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.