Behavior of Arc Spot Weld Connections in Tension
Publication: Journal of Structural Engineering
Volume 119, Issue 7
Abstract
Arc spot welds, commonly called puddle welds, are widely used for connecting cold‐formed steel roof decks to their supporting members. These support members are typically hot‐rolled steel beams or girders, or the top chord of open‐web steel joists. A comprehensive experimental study of the tension strength of arc spot weld connections used to affix a cold‐formed steel roof deck to its support member was conducted. The study investigated the key parameters that influence the connection strength: steel thickness, tensile strength, and ductility; type of weld process, automatic or manual; cross section of the roof deck; loading condition, symmetrical or eccentric load; and geometry of connection. Based on the experimental results obtained from over 260 connection tests, equations have been developed that predict the tension capacity of an arc spot weld connection. These equations are easily applied, and lend themselves to use by structural designers.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albrecht, R. E. (1988). “Developments and future needs in welding cold‐formed steel.” Proc. of the Ninth Int. Specialty Conf. on Cold‐Formed Steel Structures, Univ. of Missouri‐Rolla, Rolla, Mo.
2.
“Cold‐formed structural members.” (1984). CAN3‐S136‐M84, Canadian Standards Association, Rexdale, Canada.
3.
“Cold‐formed structural members.” (1989). CAN3‐S136‐M89, Canadian Standards Association, Rexdale, Canada.
4.
Commentary on the load and resistance factor design specification for the design of cold‐formed steel structural members. (1991). American Iron and Steel Inst., Washington, D.C.
5.
Fung, C. (1978). “Strength of arc‐spot weld in sheet steel construction.” Final Report on CSICC Industry Research Project 175, Westeel‐Rosco Ltd., Toronto, Ontario Canada.
6.
LaBoube, R. A., and Yu, W. W. (1991a). “Tensile strength of cold‐formed steel welded connections.” Proc. of Int. Conf. on Steel and Aluminum Structures, Elsevier Appl. Sci., New York, N.Y.
7.
LaBoube, R. A., and Yu, W. W. (1991b). “Uplift strength of welded connections.” Final Report, Civil Engineering Studies 91‐3, Univ. of Missouri‐Rolla, Rolla, Mo.
8.
Specification for the design of cold‐formed steel structural members. (1986). American Iron and Steel Inst., Washington, D.C.
9.
Specification for the design of cold‐formed steel structural members. (1989). American Iron and Steel Inst., Washington, D.C.
10.
“Structural welding code sheet steel.” (1989). AWS D1.3‐89, second Ed., American Welding Society, Miami, Fla.
11.
“Test procedure for mechanically fastened cold‐formed steel connections.” (1992). Cold‐Formed Steel Design Manual, American Iron and Steel Inst., Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jul 23, 1992
Published online: Jul 1, 1993
Published in print: Jul 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.