Failure Mechanism of New Bond‐Type Anchor Bolt Subject to Tension
Publication: Journal of Structural Engineering
Volume 119, Issue 4
Abstract
The objective of this study is to investigate the failure mechanism of a new bond‐type anchor bolt under tensile force so that a design method may be established. A conventional headed anchor bolt embedded in a concrete footing normally fails by pulling out a stress cone; however, the bond‐type anchor bolt exhibits a complex failure mode, here referred to as a mixed bond‐cone failure. To date, the theoretical aspects of this failure mechanism have not been established. With the needs of design application in mind, an analytical model to predict the ultimate strength of the bond‐type anchor bolt is presented. Experimental data confirm that this model can be used with acceptable accuracy to assess the ultimate strength and the failure mode of the bond‐type anchorage system.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anchorage to concrete. (1983). G. B. Hasselwander, ed., American Concrete Institute (ACI), Detroit, Mich.
2.
Bode, H., and Roik, K. (1987). “Headed studs—embedded in concrete and loaded in tension.” Anchorage to concrete, American Concrete Institute (ACI), Detroit, Mich., 61–89.
3.
Cannon, R. W., Godfrey, D. A., and Moreadith, F. L. (1981). “Guide to the design of anchor bolts and other steel embedments.” Concrete International, 3(7), 28–41.
4.
“Code requirements for nuclear safety related concrete structures.” (1985). ACI 349; appendix B—steel embedment, American Concrete Institute (ACI), Detroit, Mich.
5.
Eligehausen, R., Fuchs, W., and Mayer, B. (1987). “Load bearing behavior of anchor fastenings under tension.” Betonwerk + Fertigteil + Technik, 53(12), 826–832 (in German).
6.
Eligehausen, R., Fuchs, W., and Mayer, B. (1988): “Load bearing behavior of anchor fastenings under tension.” Betonwerk + Fertigteil + Technik, 54(1), 29–35 (in German).
7.
Goto, Y., and Chen, W. F. (1987). “On the computer‐based design analysis for the flexibly jointed frames.” J. Constr. Steel Res., 8, 203–231.
8.
Goto, Y., Obata, M., Matsuura, S., Maeno, H., and Morimoto, A. (1990). “On a new anchorage system for a steel pier.” Int. Conf. on Struct. Engrg. and Computation, Beijing University Press, Beijing, China, 803–810.
9.
Klingner, R. E., and Mendonca, J. A. (1982). “Tensile capacity of short anchor bolts and welded studs: a literature review.” ACI J., 79, (July–August), 270–279.
10.
Maeno, H., Goto, Y., Obata, M., and Matsuura, S. (1992). “Bonding characteristics of a very large deformed bar with headed studs.” Proc., Japan Society of Civil Engineers, Tokyo, Japan, No. 441/I‐18, 87–96 (in Japanese).
11.
Manfred, K., and Gerhard, M. (1987). “Finite element models for bond problems.” J. Struct. Engrg., 113(10), 2160–2173.
12.
Marsh, M. L., and Burdette, E. D. (1985). “Multiple bolt anchorages: method for determining the effective projected area of overlapping stress cones.” Engrg. J., 22(first quarter), 29–32.
13.
Rehm, G., Eligehausen, R., and Mallée, R. (1988). “Befestigungstechnik.” Betonkalendar, Berlin, Germany, Vol. 2, 562–663 (in German).
14.
Roark, R. J. (1965). Formulas for stress and strain, 4th Ed., McGraw‐Hill Book Co., Inc., New York, N.Y., 432.
15.
Russo, G., Zingone, G., and Romano, F. (1990). “Analytical solution for bond‐slip of reinforcing bars in R.C. joints.” J. Struct. Engrg., 116(2), 336–355.
16.
Shipp, G. J., and Haninger, E. R. (1983). “Design of headed anchor bolts.” Engrg. J., 20(second quarter), 58–69.
17.
Stone, C. S., and Carino, N. J. (1983). “Deformation and failure in large‐scale pullout tests.” ACI J., 80(Nov.–Dec.), 501–513.
18.
Specification of steel‐concrete composite structures. (1985). Architectural Institute of Japan (AIJ), Tokyo, Japan (in Japanese).
19.
Specification of highway bridges. (1990). Japan Road Association (JRA), Tokyo, Japan (in Japanese).
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: May 8, 1992
Published online: Apr 1, 1993
Published in print: Apr 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.