Approximate Moment‐Curvature Relationships for Slender Columns
Publication: Journal of Structural Engineering
Volume 119, Issue 4
Abstract
This paper presents the derivation of an approximate second‐order method for the analysis and design of slender cantilever compression members. The method is based on the generation of equivalent linear representations for the nonlinear moment‐curvature relationships for the column cross section. The linear equations are derived in such a way that they closely predict the nominal strength of the slender column for a prescribed axial load. The derivation is based on the guidelines of the German Code and Heft 220—which, unlike the moment magnifier method, takes into account the influence of the axial load on the stiffness of the column. The results of the proposed method are in excellent agreement with experimental data and predictions from sophisticated computer programs.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arenas DePablo, J. J. (1980). “Design of rectangular reinforced concrete columns according to second order theory.” Editores Tecnicos Asociados S.A., Barcelona, Spain (in Spanish).
2.
“Bemessung von Beton und Stahlbeton‐bauteilen nach DIN‐1045.” (1979). Heft 220. Schriftenreihe des Deutschen Ausschusses fur Stahlbeton (DAfStb). Wilhelm, Ernst & Sohn, Berlin, Germany (in German).
3.
“Beton und Stahlbetonbau.” (1978). Bemessung und Ausfuhrung, DIN 1045. Beuth‐Vertrieb, Berlin, Germany (in German).
4.
Breen, J. E. (1962). “The restrained long concrete column as a part of a rectangular frame,” PhD dissertation, Univ. of Texas at Austin, Austin, Tex.
5.
Breen, J. E., and Ferguson, P. M. (1966). “The tall bridge pier subject to longitudinal bridge forces and tilting of the base.” Final report to the office of the chief of engineers, Univ. of Texas at Austin, Austin, Tex.
6.
Building code requirements for reinforced concrete (ACI 318‐89) and Commentary (ACI 318R‐89). (1989). American Concrete Institute, Detroit, Mich.
7.
Chang, W. F., and Ferguson, P. M. (1963). “Long hinged reinforced concrete columns.” ACI J., 60(1), 1–25.
8.
El‐Metwally, S. E., and Chen, W. F. (1989). “Load‐deformation relations for reinforced concrete sections.” ACI Struct. J., 86(2), 163–167.
9.
Fowler, T. J. (1966). “Reinforced concrete columns governed by concrete compression,” PhD dissertation, Univ. of Texas at Austin, Austin, Tex.
10.
Furlong, R. W. (1976). “Guidelines for analyzing column slenderness by a rational analysis of an elastic frame.” ACI J., 73(3), 138–140.
11.
Gooden, W. G. (1965). Numerical analysis of beam and column structures. Prentice‐Hall, Englewood Cliffs, N.J.
12.
Huang, C. (1990). “Nonlinear time‐dependent finite element analysis of reinforced concrete space frames containing slender columns and flanged beams,” PhD dissertation, Dept. of Civ. Engrg., Univ. of Kentucky, Lexington, Ky.
13.
Huber, A. (1983). “Pre‐analysis of reinforced concrete structures stability.” Jornadas de Ingenieria Estructural, III, Asociacion de Ingenieros Estructurales, Buenos Aires, Argentina (in Spanish).
14.
Leonhardt, F., and Monnig, E. (1985). Reinforced concrete structures, Vol. 1, Editorial El Ateneo, Buenos Aires, Argentina (in Spanish).
15.
Manzelli, A. A., and Harik, I. E. (1993). “Prismatic and nonprismatic slender columns and bridge piers.” J. Struct. Engrg., ASCE, 119(4), 1133–1149.
16.
McGregor, J. G. (1988). Reinforced concrete—mechanics and design. Prentice‐Hall, Englewood Cliffs, N.J.
17.
“Model code for concrete structures.” (1978). Bulletin d'Information 124/125E, Comite Euro‐Internationale du Beton, Paris, France.
18.
Park, R., and Paulay, T. (1975). Reinforced concrete structures. John Wiley & Sons, New York, N.Y.
19.
Poston, R. W. (1980). “Computer analysis of slender nonprismatic or hollow bridge piers,” MS thesis, Univ. of Texas at Austin, Austin, Tex.
20.
Poston, R. W., Breen, J. E., and Roesset, J. M. (1985a). “Analysis of nonprismatic or hollow slender concrete bridge piers.” ACI J., 82(5), 731–739.
21.
Poston, R. W., Gilliam, T. E., Yamamoto, Y., and Breen, J. E. (1985b). “Hollow concrete bridge piers.” ACI J., 82(6), 779–787.
22.
Poston, R. W., Diaz, M., and Breen, J. E. (1986). “Design trends for concrete bridge piers.” ACI J., 83(1), 14–20.
23.
Poston, R. W., Diaz, M., Breen, J. E., and Roesset, J. M. (1983). “Design of slender, nonprismatic, and hollow concrete bridge piers.” Res. Rep. No. 254‐2F, Center for Transportation Research, Univ. of Texas at Austin, Austin, Tex.
24.
Quast, U. (1980). Slender concrete columns—conferences 1980. Instituto Nacional de Tecnologia Industrial, Buenos Aires, Argentina (in Spanish).
25.
Quast, U. (1985). Slender concrete columns—conferences 1985. Instituto Nacional de Tecnologia Industrial, Buenos Aires, Argentina (in Spanish).
26.
Standard Specifications for Highway Bridges. (1989). 14th Ed. American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C.
27.
Wood, B. R., Beaulieu, D., and Adams, P. F. (1976). “Column design by P‐delta method.” J. Struct. Engrg., ASCE, 102(2), 411–427.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jan 15, 1992
Published online: Apr 1, 1993
Published in print: Apr 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.