Load Distribution in Multibeam Precast Pretopped Prestressed Bridges
Publication: Journal of Structural Engineering
Volume 119, Issue 3
Abstract
Three 50 ft two‐lane simply supported prestressed precast pretopped double‐T tangent bridges with and without end diaphragms are analyzed using a three‐dimensional finite‐element algorithm. The beams of each bridge are interconnected at 3 m (10 ft) intervals along their flanges. Several cases of American Association of State Highway and Transportation Officials (AASHTO) HS 20‐44 truck loadings were studied, as well as loading due to long‐term differential camber between contiguous beams. The results obtained illustrate the distribution of superimposed dead loads and wheel loads to individual beams as well as the internal forces generated by the effect of differential camber. The maximum generated internal forces under gravity loads were compared to those using AASHTO's 1983 standard specifications for highway bridges. The internal forces developed at flange connectors were also obtained and their effect on internal forces in the beams discussed. The effect of skewness was also illustrated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“ADINA; program for generation of input data to ADINA.” (1984a). Report AE 84‐6.
2.
“ADINA; theory and modeling guide.” (1984b). Report AE 84‐4.
3.
“ADINA; verification manual.” (1984c). Report AE 84‐5.
4.
Bishara, A. G. (1984). “Analysis for design of bearings at skew bridge supports.” Final Rep., Ohio Department of Transportation, Ohio.
5.
“Current design practice.” (1985). Design handbook; precast and prestressed concrete, PCI.
6.
El‐Mousa, K. O. (1988). “Distribution of loads and internal forces in precast pretopped stemmed multibeam bridges.” MS thesis, Ohio State University, Columbus, Ohio.
7.
Jones, H. L., and Boaz, I. B. (1986). “Skewed discretely connected multi‐beam bridges.” Struct. Engrg., ASCE, 112(2), 257–272.
8.
Soegiarso, R. (1989). “Load distribution and connection forces in multibeam precast pretopped stemmed bridges.” MS thesis, Ohio State University, Columbus, Ohio.
9.
Standard specification for highway bridges. (1983). 13th Ed., American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C.
10.
Stanton, J. F. (1983). “Point load on precast concrete floors.” J. Struct. Engrg., ASCE, 109(11), 2619–2637.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Mar 15, 1991
Published online: Mar 1, 1993
Published in print: Mar 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.