Seismic Performance of Joist‐Pocket Connections. I: Modeling
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 119, Issue 10
Abstract
This paper outlines the development of a technique for the examination of the seismic performance of joist and beam bearing connections in unreinforced masonry structures. An understanding of these “pocket” connections will allow for better estimates of the behavior of brick buildings, and provide a useful tool for the design of seismic retrofit details, particularly in cases when it is imperative to minimize the interventions. A finite‐element model that accounts for the friction and impact behavior at the diaphragm‐to‐wall interface is developed. An equivalent coefficient‐of‐restitution procedure is described to account for energy loss in collisions between flexible bodies. Several simple but representative examples illustrate the method and demonstrate its ability to capture the sliding and impact behavior at the connection detail. (In the companion paper, a historic brick building that was shaken during the Loma Prieta earthquake of 1989, is modeled using the approach described herein.)
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Antonucci, R., Carboni, M., and Cocchi, G. (1989). “Analytical model and numerical application of the structural behaviour of masonry walls under plane stress.” Structural repair and maintenance of historic buildings, Computational Mechanics Publications, Southampton, England.
2.
Benedetti, D., and Benzoni, G. M. (1984). “A numerical model for seismic analysis of masonry buildings: Experimental correlations.” Earthquake Engrg. and Struct. Dynamics, 12, 817–831.
3.
Chiostrini, S., Fraboschi, P., and Sorace, S. (1989). “Problems connected with the arrangement of a nonlinear finite element method to the analysis of masonry structures.” Structural repair and maintenance of historic buildings, Computational Mechanics Publications, Southampton, England.
4.
Chiostrini, S., and Vignoli, A. (1989). “Application of a numerical method to the study of masonry panels with various geometry under seismic loads.” Structural repair and maintenance of historic buildings, Computational Mechanics Publications, Southampton, England.
5.
Cross, W. B. (1992). “Analysis of the seismic performance of connections in historic unreinforced masonry structures,” PhD dissertation, Johns Hopkins University, Baltimore, Md.
6.
Cross, W. B., and Jones, N. P. (1993). “Seismic performance of joist‐pocket connections. II: Applications.” J. Struct. Engrg., ASCE, 119(10), 3008–3023.
7.
Evaluating the Seismic Resistance of Existing Buildings; ATC‐14. (1987). Applied Technology Council (ATC), Redwood City, Calif.
8.
Galambos, T. V., and Mayes, R. L. (1978). Dynamic tests on a reinforced concrete building. Department of Civil Engineering, Washington University, St. Louis, Mo.
9.
Hughes, T., Taylor, R., Sackman, J., and Kanoknukulchi, W. (1976). “A finite element method for a class of contact impact problems.” Computer Methods in Appl. Mech. and Engrg., 8(3), 249–276.
10.
Ignatakis, C., Stavrakakis, E., and Penelis, G. (1989). “Analytical model for masonry using the finite element method.” Structural repair and maintenance of historic buildings, Computational Mechanics Publications, Southampton, England.
11.
Jones, N. (1989). Structural impact. Cambridge University Press, Cambridge, England.
12.
Kanes, T. R., and Levinson, D. A. (1985). Dynamics: Theory and Applications. McGraw‐Hill Book Co., Inc., New York, N.Y.
13.
Karantoni, F. V., and Fardis, M. N. (1992). “Computed versus observed seismic response and damage of masonry buildings.” J. Struct. Engrg., ASCE, 118(7), 1804–1821.
14.
Kikuchi, N., and Oden, J. (1988). Contact problems in elasticity: A study of variational inequalities and finite element methods, Studies in Applied Mathematics, Philadelphia, Pa.
15.
Martins, J., and Oden, J. T. (1983). “A numerical analysis of a class of problems in elastodynamics with friction.” Computer Methods in Appl. Mech. and Engrg., 40(3), 327–360.
16.
Mengi, Y., and McNiven, H. D. (1989). “A mathematical model for the in‐plane nonlinear earthquake behavior of unreinforced masonry walls. Parts I and II.” Earthquake Engrg. and Struct. Dynamics, 18(Feb.), 223–247.
17.
“NEHRP recommended provisions for the development of seismic regulations for the development of seismic regulations for new buildings. Part 1: Provisions.” FEMA‐95. (1988). Federal Emergency Management Agency (FEMA), Washington, D.C.
18.
Page, A. W. (1978). “Finite element model for masonry.” J. Struct. Div., ASCE, 104(8), 1267–1285.
19.
Procedures for postearthquake safety evaluation of buildings; ATC‐20. (1989). Applied Technology Council (ATC), Redwood City, Calif.
20.
Talaslids, D., and Panagiotopoulos, P. (1982). “A linear finite element approach to the solution of the variational inequalities arising in contact problems of structural dynamics.” Int. J. Num. Methods Mech. Engrg., 18(10), 1505–1520.
21.
Tena‐Colunga, A. (1992). “Seismic evaluation of unreinforced masonry structures with flexible diaphragms.” Earthquake Spectra, 8(2), 305–318.
22.
Uniform building code. (1991). International Conference of Building Officials, Whittier, Calif.
23.
Zukas, J. A., Nicholas, T., Swift, H. F., Geszczuk, L. B., and Curran, D. R. (1982). Impact dynamics. John Wiley and Sons, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Sep 11, 1992
Published online: Oct 1, 1993
Published in print: Oct 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.