Influence of ADAS Element Parameters on Building Seismic Response
Publication: Journal of Structural Engineering
Volume 118, Issue 7
Abstract
Supplemental damping devices have been used to decrease the dynamic response of buildings subjected to wind and earthquake inputs. These devices can be generalized into the following three major types: friction devices, viscous or viscoelastic devices, and material yield devices. Lead dampers would be included in this last case, even though its characteristics do not involve yielding. A study of one of the metallic yield devices, the steel‐plate added damping and stiffness (ADAS) device, is presented. Yield force, yield displacement, strain‐hardening ratio, ratio of the device stiffness to the bracing member stiffness, and ratio of device stiffness to structural story stiffness without the device in place have been identified as the most important parameters to characterize the performance of this device. The influence of these parameters on earthquake response of building structures is analyzed. The results show that these devices can substantially increase the energy dissipation capacity of a structure and significantly reduce the energy dissipation demand on the framing members of a structure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akkari, M. M. (1984). “Nonlinear dynamic analysis using mode superposition,” PhD thesis, University of California, Davis, Calif.
2.
Bergman, D. M., and Hanson, R. D. (1986). “Characteristics of viscoelastic mechanical damping devices.” Proc., ATC Seminar on Base Isolation and Passive Energy Dissipation, Applied Technology Council, Redwood City, Calif.
3.
Bergman, D. M., and Hanson, R. D. (1990). “Viscoelastic versus steel plate mechanical damping devices: An experimental comparison.” Proc., 4th U.S. Nat. Conf. on Earthquake Engrg., Earthquake Engineering Research Institute, Oakland, Calif.
4.
Hanson, R. D. (1986). “Basic concepts and potential applications of supplemental mechanical damping for improving earthquake resistance.” Proc., ATC Seminar on Base Isolation and Passive Energy Dissipation, Applied Technology Council, Redwood City, Calif.
5.
Kanaan, A. E., and Powell, G. H. (1973). “General purpose computer program for inelastic dynamic response of plane structures.” Report No. UCB/EERC‐73/6, Univ. of California at Berkeley, Berkeley, Calif.
6.
Scholl, R. E. (1990). “Improve the earthquake performance of structures with added damping and stiffness elements.” Proc., 4th U.S. Nat. Conf. on Earthquake Engrg., Earthquake Engineering Research Institute, Oakland, Calif.
7.
Steimer, S. F., and Chow, F. L. (1984). “Curved plate energy absorbers for earthquake resistant structures.” Proc. 8th World Conf. on Earthquake Engrg., Earthquake Engineering Research Institute, Oakland, Calif., Vol. V, 967–974.
8.
Su, Y.‐F., and Hanson, R. D. (1990a). “Comparison of effective supplemental damping: Equivalent viscous and hysteretic.” Proc., 4th Nat. Conf. on Earthquake Engrg., Earthquake Engineering Research Institute, Oakland, Calif.
9.
Su, Y.‐F., and Hanson, R. D. (1990b). “Seismic response of building structures with mechanical damping devices.” Report UMCE90‐2, Univ. of Michigan, Ann Arbor, Mich.
10.
Uang, C. M., and Bertero, V. V. (1988). “Use of energy as a design criterion in earthquake resistant design.” Report No. EERC 88‐18, Earthquake Engrg. Res. Ctr., Univ. of California at Berkeley, Berkeley, Calif.
11.
Uniform building code. (1988). Int. Conf. of Bldg. Officials, Whittier, Calif.
12.
Whittaker, A. S. Bertero, V. V., Alonso, L. J., and Thompson, C. (1989). “Earthquake simulator testing of steel plate added damping and stiffness elements.” Report No. UCB/EERC‐89/02, Earthquake Engrg. Res. Ctr., Univ. of California at Berkeley, Berkeley, Calif.
13.
Workman, G. H. (1969). “The inelastic behavior of multistory braced frame structures subjected to earthquake excitation,” PhD thesis, Univ. of Michigan, Ann Arbor, Mich.
14.
Xia, C., Hanson, R. D., and Wight, J. K. (1990). “A study of ADAS element parameters and their influence on earthquake response of building structures.” Report UMCE 90‐12, Univ. of Michigan, Ann Arbor, Mich.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Jul 1, 1992
Published in print: Jul 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.