Fatigue Resistance of Large‐Diameter Cable for Cable‐Stayed Bridges
Publication: Journal of Structural Engineering
Volume 118, Issue 3
Abstract
Fatigue tests on a parallel‐wire large‐diameter cable system for cable‐stayed bridges and a detailed review of other fatigue test results are conducted. As a result, it is made clear that as the diameter of a cable increases, its fatigue strength decreases, stress concentration at the cable anchor portion is the principal factor influencing the fatigue strength of large‐diameter cables within working stress range in fatigue design of cables, and when the cable is grouted with cement for anticorrosion purposes, nongalvanized wires may have their life extremely shortened by corrosion fatigue due to excess water after a chemical reaction, which depends on the quality of material and on the manner of execution. Furthermore, the design S‐N curves, which are based on 5% wire breakage life, are proposed. The results of this study are used for fatigue design of Honshu‐Shikoku railway/highway cable‐stayed bridges, which are constructed over the sea (severely affecting durability) and on which a large repeated load due to railway acts.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andrä, W., and Saul, R. (1974). “Versuche mit Bündeln aus parallelen Drähten unt Litzen für die Nordbrüc Mannheim‐Ludwigshafen unt das Zeltdach in München.” J. Die Bautechnik, 51(9), 289–298(in German).
2.
Birkenmaier, M. (1980). “Fatigue resistant tendons for cable‐stayed construction.” Periodica of Int. Assoc. for Bridge and Struct. Engrg., 2/P‐30/80, 65–79.
3.
DIN 1073. (1974). Germany Industrial Standards, 7 (in German).
4.
Kubomura, K., Shimokawa, H., and Takena, K., (1983). “Technological development of long‐spanned Honshu‐Shikoku Bridges for railway.” J. Japan Soc. of Civ. Engrs., Tokyo, Japan, 68 (6), 18–41(in Japanese).
5.
Makino, F., Komatsu, S., Tanaka, Y., and Haraguchi, T., (1986). “The fatigue strength of long and large parallel wire cables.” Proc., Japan Society of Civil Engineers, Tokyo, Japan, 374/I‐6 (10), 477–486(in Japanese).
6.
Matsukawa, A., Kamei, M., Fukui, Y., and Sasaki, Y., (1985). “Fatigue analysis of parallel wire strand cable under consideration of influencing factors,” J. Struct. Engrg. (Japan Soc. of Civ. Engrs., Tokyo, Japan,31A (3), 157–166(in Japanese).
7.
Nakamura, S., and Hosokawa, H., (1989). “A study on the fatigue design of parallel wire strands on cable‐stayed bridges.” Proc., Japan Society of Civil Engineers, Tokyo, Japan, 410/I‐12 (10), 477–486(in Japanese).
8.
Private report on fatigue test on NEW PWS. (1987). Nippon Steel Corp., Tokyo, Japan (in Japanese).
9.
Private report on static and fatigue test results about Shinko non‐grouted cable. (1986). Shinko Wire Corp., Kohbe, Japan (in Japanese).
10.
Report on construction of superstructure in Iwaguro‐shima Bridge. (1988). Honshu‐Shikoku Bridge Authority, Tokyo, Japan, 3, 18/60‐77 (in Japanese).
11.
Report on steel superstructure in Honshu‐Shikoku Bridges. (1983). Honshu‐Shikoku Bridge Authority, Tokyo, Japan, 3, 11‐25 (in Japanese).
12.
Saeki, S., Nishikawa, K., and Takigawa, A. (1982). “Test on cable for Yasaka Bridge.” No. 1810(2), Public Works Res. Inst., Tokyo, Japan (in Japanese).
13.
Sasaki, Y., Kiuchi, A., Shinke, T., Mikato, T., Nishi, T., and Sugii, K., (1988). “Fatigue resistance analysis of corroded wire.” R&D Kobe Steel Engrg. Reports, 38 (1), Kohbe, Japan, 63–66(in Japanese).
14.
Tanabe, S., Toda, T., and Sugita, T., (1989). “NEW‐PWS cable for cable‐stayed bridges.” Proc. 18th Conf., Japan Road Association, Tokyo, Japan, 10, 838–839(in Japanese) .
15.
Tanaka, Y., and Haraguchi, T. (1979). “Fatigue characteristic of HiAm cable.” Proc. 34th Annual Conf, Japan Society of Civil Engineers, Tokyo, Japan, 10, 111–112 (in Japanese).
16.
Tanaka, Y., and Haraguchi, T. (1983). “Anchor mechanism of HiAm cable.” Proc. 38th Annual Conf., Japan Society of Civil Engineers, Tokyo, Japan, 9, 305‐306 (in Japanese).
17.
Yasuda, M., Takeyama, T., and Nozawa, M., (1986). “Design and fabrication of cables on Iwakuro‐shima Bridge.” Tech. Report, Honshu‐Shikoku Bridge Authority, Tokyo, Japan, 39 (7), 12–19(in Japanese).
18.
Yokobori, T., and Ichikawa M. (1970). “Fatigue failure of metal.” Maruzen Co., Ltd., Tokyo, Japan, 51 (in Japanese).
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Mar 1, 1992
Published in print: Mar 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.