Design Implications of Measured Pressures and Strains in Silos
Publication: Journal of Structural Engineering
Volume 118, Issue 10
Abstract
An ongoing program to measure silo pressures and frictional wall loads in full‐size silos has been conducted over the past 17 years. The paper summarizes some of the more recent findings of the work. These include observations of the nature of pressures and strains in silos during filling and the changes that occur at the start of emptying. Pressures and strains for silos may be nonuniform around the perimeter, and are dependent on thermal effects. Suggestions are made as to how these observations could be incorporated into design procedures for silos.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anderson, P. (1966). “Temperature stresses in steel grain storage tanks.” Civ. Engrg., ASCE, Jan. 74.
2.
Blight, G. E. (1985). “Temperature changes affect pressures in steel bins.” Int. J. Bulk Solids Storage in Silos, 1(3), 1–7.
3.
Blight, G. E. (1986a). “Pressures exerted by materials stored in silos: Part 1, Coarse materials.” Geotechnique, 36(1), 33–46.
4.
Blight, G. E. (1986b). “Pressures exerted by materials stored in silos: Part 2, Fine powders.” Geotechnique, 36(1), 47–56.
5.
Blight, G. E. (1986c). “A comparison of design and measured lateral pressures in a large coal load‐out silo.” Int. J. Bulk Solids Storage in Silos, 2(2), 1–8.
6.
Blight, G. E. (1988). “A comparison of measured pressures in silos with code recommendations.” Bulk Solids Handling, 8(2), 145–153.
7.
Blight, G. E. (1989). “Behaviour of a bolted corrugated steel grain silo.” Powder Handling and Processing, 1(2), 143–149.
8.
Blight, G. E. (1990a). “Load and temperature strains of a welded plane plate grain silo.” Powder Handling and Processing, 2(1), 25–29.
9.
Blight, G. E. (1990b). “Measured loading on a small steel grain silo.” Powder Handling and Processing, 2(2), 153–158.
10.
Blight, G. E. (1990c). “Temperature surcharge pressures in reinforced concrete silos.” Powder Handling and Processing, 2(3), 303–305.
11.
Blight, G. E. (1990d). “Defects in accepted methods of estimating design loading for silos.” Proc. Inst. Civ. Engrs., Part 1, 88, 1015–1036.
12.
Blight, G. E., and Bentel, G. M. (1988). “Measurements on full size silos, Part 2: Pressures.” Bulk Solids Handling, 8(3), 343–346.
13.
Clague, K. (1973). “The effects of stresses in bunkers,” PhD thesis, University of Nottingham, Nottingham, U.K.
14.
Deutsch, G. P., and Clyde, D. H. (1967). “Flow and pressure in granular materials in silos.” J. Engrg. Mech. Div., ASCE, 93(6), 102–125.
15.
Deutsches Institut für Normung “Lastannahmen für Bauten‐Lasten in Silozellen.” (1987). Deutsches Institut fur Normung (DIN), DIN 1055, Part 6, Berlin, Germany.
16.
Georgiannou, V. N., Rampello, S., and Silvestri, F. (1991). “Static and dynamic measurements of undrained stiffness on natural overconsolidated clays.” Proc. 10th European Conf. Soil Mech. and Found. Engrg., Florence, Italy, VI, 91–96.
17.
Hartlen, J., Neilsen, J., and Ljunggren, L. (1984). The wall pressure in large grain silos. Swedish council for Building Research, Stockholm, Sweden.
18.
“Guidelines for the assessment of loads on bulk solids containers.” (1986). The Institution of Engineers, Melbourne, Australia.
19.
Janssen, H. A. (1895). “Versuche über Getreide druck in Silozellen.” VDI Zeitschrift, 39, 1045–1049.
20.
Jenike, A. W. (1964). “Storage and flow of solids.” Bull. 123, Engineering Experiment Station, University of Utah, Salt Lake City, Utah.
21.
Lambe, T. W., and Whitman, R. V. (1969). Soil Mechanics. John Wiley & Sons, New York, N.Y., 166, 330.
22.
“Loads exerted by free‐flowing grains in bins.” (1989). ASAE Engineering Practice, ASAE EP433, American Society of Agricultural Engineers, St. Joseph, Mich.
23.
Nielsen, J. (1983). “Pressure measurements in a full‐scale fly ash silo.” Proc. Fine Particle Society Meeting, Hawaii.
24.
Omote, Y., and Suekane, M. (1986). “Pressure measurements on large‐scale coal storage silo at the Saijo power station in Japan.” Int. J. Bulk Solids Storage in Silos, 2(1), 11–16.
25.
Puri, V. M., Zhang, Z., and Marbeck, H. B. (1986). “Influence of granular materials properties on thermally induced bin loads.” Int. J. Bulk Solid Storage in Silos, 2(3), 1–7.
26.
Reynolds, C. E. (1932). Reinforced concrete designer's handbook. Concrete Publications, London, U.K.
27.
Walker, D. M. (1966). “An approximate theory for pressures and arching in hoppers.” Chemical Engineering Science, 21, 875–997.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Oct 1, 1992
Published in print: Oct 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.